In the mid-1920 George Wilbur Cornelius started a program of experimentation on variable-incidence wings. No technical reports on the results of his work appear to have been published and little is known about the four types he produced. In 1930 George Wilbur Cornelius formed Cornelius Aircraft Co. at Glendale, California.
Era
Cordner No.1 monoplane

The 1910 Cordner monoplane No. 1 was designed and built by Joseph Cordner in the UK.
Corby CJ-1 Starlet

The Starlet was designed by Australian aero engineer John Corby of Sydney, N.S.W, Australia, for a competition held by English company Rollason Aircraft Ltd in 1964. The design was placed eighth, although it became first from the competition to be built. The prototype (VH-CBS) first flew on August 9th, 1967.
The Corby Starlet is a semi-aerobatic sports aircraft made of an all-wood onstruction.
The fuselage is a combination of spruce longerons and frames and is sheeted with plywood. The wing is a single-piece structure, consisting of a solid laminated spar and built-up ribs. The remainder of the wing, including the ailerons, is open-structure and fabric covered. The D-nose leading edge is plywood covered. The main undercarriage consists of spring-steel legs bolted to a stiffened frame in the fuselage, immediately behind the firewall. An 8 Imp. gallon fuel tank is located in the fuselage, immediately behind the firewall.
Powered usually by a VW conversion, the Starlet will take any suitable engine up to 75 hp and 72 kg (160 lb) in weight, and is aerobatic with limitations of +4.8 and 1.8G. Fuel consumption in the Starlet is between 10 and 14 litres per hour, depending on the power settings used, with an economic cruise of 110 knots. The Starlet can carry 15 lbs in a locker behind the seat, still normally within centre of gravity limits. Extra freight in most single seat homebuilts is usually either worn or sat upon to keep the C of G in the same place. Economic cruise is around 85 knots. At almost full throttle (3400 revs) the aircraft will approach VNE (138kts). The stall in a glide came at 35 knots.
Some Starlets have been outfitted with 2180’s (75-80 hp) and these cruise at VNE (185) and climb at 1900 fpm.
Corby CJ-1 Starlet
Engine: VW or Jabiru
Horsepower: VW 45 – 75 hp Jabiru 80 hp
Propeller: Wood 54 inch
Overall Length: 15.1 ft (4.6 m)
Height: 4.8 ft (1.46 m)
Wingspan: 18.5 ft (5.63 m)
Wing Area: 68.5 sq ft (6.36 sq m)
Wing Loading: 10.9 lbs/sq ft (4.9 kg/sq m)
Cabin Width: 21.75 inch (.55 m)
Empty Weight: 450 lbs (203.6 kg)
Gross Weight: 750 lbs (339.4 kg)
Useful Load: 300 lbs (135.7 kg)
Fuel Capacity: 11.1 gal (42 l)
Maximum Speed: 139 kts @ sea level
Cruise Speed: 113 kts
Stall (or Min.) Speed:@ gross weight 30 kts
Service Ceiling: 14,500 ft (4419 m)
Takeoff Distance: 350 ft (106 m)
Landing Distance: 450 ft (137 m)
Rate of Climb (gross): 1000 fpm
Maximum Range: 425 nm
“G” Loading: +4.5g (+6.75g ultimate), -4.5g
Landing Gear: FG (Tailwheel)
Seats: 1
Corby Starlet
Engine: VW conversion, 70 hp
Engine range: 160 lbs or less 75 hp
Fuselage Length: 14 ft 9 in
Height: 4 ft 10 in
Width: 21.75 in
Span: 18 ft 6 in
Wing Area 68.5 sq.ft
Wing loading 10.2 lb/sq.ft
Power loading 11.6 lbs per hp
Empty Weight 450 – 500 lbs
Gross weight one piece wing: 750 lbs
Gross weight two piece wing: 650 lbs
Takeoff distance 350 ft
Landing distance 450 ft
Fuel capacity 11 gals US/ 9.7 Imp. Gals/44 lbs/20 kg
Stall (power off) 35 mph
Top speed (level) 160 mph
Normal Cruise 115-130 mph
Fuel burn Cruise 3.5 gph US / 21 lbs per hr
VNE (Mph) 159 (tested to 185)
Rate of Climb 850 fpm
Range 425 sm
Servive ceiling: 14,500 ft
Roll Rate 270 dps (approx.)
Take-off dist 50 ft: 1200 ft
Landing dist 50 ft: 1200 ft
Design Load +/- 4.5 proof (+/- 6.75 ultimate) Utility or Semi Aerobatic
MAC 45 in
Incidence 2.5 deg – 1 deg Tip
Airfoil: NACA 43012A
Aileron Deflection +15 deg – 15 deg
Horizontal tailplane
Span: 6 ft 6 in
Area: 13.75 sq. ft.
Elevator deflection +30 deg – -20 deg
Vertical Tailplane
Area: 7.4 sq. ft.
Rudder Deflection +/- 25 deg
Horsepower range: 30 to 60
Engine Weight 130-160 lbs
C.G. Range: 20 – 25% MAC or 8.7 in to 11.4 in” aft of Wing LE
Number of Seats:
One Building Time: 1400+
Engine: Agusta, 42 h.p.
Span: 18’ 6”.
Length: 14’ 9”.
Wing Area: 68.5 sq. ft.
Empty Weight: 400 lb.
Loaded Weight (semi-aerobatic): 650 lb.
Wing Loading: 9.2 lb/sq. ft.
Max. Speed: 115 mph.
Cruise Speed: 104 mph.
Engine: VW, 60 hp.
Vne: 160 mph.
Cruise: 130 mph.
Range: 425 sm.
Stall: 35 mph.
ROC: 1000 fpm.
Take-off dist: 350 ft.
Landing dist: 450 ft.
Service ceiling: 14,500 ft.
Fuel cap: 11 USG.
Weight empty: 450 lbs.
Gross: 750 lbs.
Height: 4.8 ft.
Length: 15.1 ft.
Wing span: 18.5 ft.
Wing area: 68.5 sq.ft.
Seats: 1.
Landing gear: tail wheel.
Corbi Air Alto

The Corbi Alto 100 is an all-metal low-winger. Standard features include Com radio, S-mode transponder, SkyView 10-inch EFIS panel, and Approach FastStack electrical power bus. An option: retrofittable FlyCool air-conditioning. Base Price 2012: US$105,000.
Corben Super Ace

The Super Ace is constructed of basic materials, 4130 steel tubing for the fuselage, tail group, landing gear, fittings and wing struts. The wings are spruce spars and the wing ribs of spruce cap strips. The complete aircraft is covered with the PolyFiber covering materials. The wheels are 600×6 with hydraulic toe brakes. The control system is cable operated. The Prototype Super Ace is powered by a Continental C-85-8 engine of 85 hp. It does not have a starter or an electrical system. Power plants of up to 150 hp can be used; however, weight and balance considerations must be given to maintain the same engine and cowling lines and to keep the airplane’s proportions. The continental engine swings a Sensenich prop, which give a cruise speed of some 90 mph. The stall characteristics are gentle and straight forward. The coil springs mounted in tubes provide a soft landing and the wide landing gear adds to the ease of ground handling and a reasonable crosswind landing.
One of the many designs to come from the drawing board of EAA’s founding President, Paul H. Poberezny, the Super Ace, is an ideal project for first time builders. It offers the excitement of open cockpit flying and excellent performance. With options for 85 hp to 150 hp, the Super Ace can meet a wide range of desires. The fuselage is a traditional 4130 steel tube frame that’s covered with Stits Poly-fiber. The two-piece wing is made of Sitka spruce spars, ribs formed with 1/2” x 1/2” spruce caps and covering is again Stits Poly-fiber. Wing span is 27’-3 1/2”, length is 18’5” and empty weight is 685 pounds with a useful load factor of 385 pounds. Using a C-85 on the prototype, cruise speed is 90 mph. Info packs on the Pober Super Ace were $8.00, plans were $125.00 in 2009.
Pober Super Ace
Engine: Continental C-85, 80 hp.
HP range: 85-150.
Speed max: 160 mph.
Cruise: 110 mph.
Range: 250 sm.
Stall: 44 mph.
ROC: 500 fpm.
Take-off dist: 350 ft.
Landing dist: 450 ft.
Service ceiling: 25,000 ft.
Fuel cap: 12 USG.
Weight empty: 685 lbs.
Gross: 1030 lbs.
Height: 6.6 ft.
Length: 18.42 ft.
Wing span: 27.3 ft.
Wing area: 118 sq.ft.
Seats: 1.
Landing gear: tail wheel.
Corben Junior Ace / Ace Aircraft Junior Ace

The Junior Ace is lightweight, easy to build, fun to fly and requires minimal maintenance. It has been modified from the original Corben Baby Ace so that it can utilize aircraft engines. The fuselage has also been widened, the horizontal stabilizer was modified for easier construction and modern aircraft wheels and brakes are now called for. With nearly a 34 ft wingspan and Clark Y airfoil, the Pober Junior Ace, designed by EAA founding president Paul Poberezny, is docile in stall and landing patterns. Airframe is 4130 steel tubing, wings are all wood and the recommended powerplant is a Continental C-85. Empty weight of the Junior Ace is 750 pounds and gross capacity is 1,320 pounds.

The Pober Junior Ace made its first flight with Captain Bud Judy at the controls. This first flight was successful and displayed the short field capabilities as well as low stall speed – ideal for small airstrips. The drawings for the airplane have full size wing rib drawings and two types of ailerons – the Friess aileron being a bit more responsive and lighter on aileron control. The indicated stall speed with one person on board is approximately 36 mpg. Indicated cruise with the Continental C-85-8 was a little over 80 mph. The Pober Junior Ace is open cockpit. The fuselage is chromoly steel tube, the tail group is chromoly steel tube and flat sheet stock to form ribs. The landing gear is chromoly tube with coil spring shocks. Wings are spruce spars and ribs. Two place side by side.
The kit price in 2009 was US$20950.
Junior Ace E
Engine: 85hp.
Span: 26’5”.
Wing area: 112 sq.ft.
Length: 17’9”.
Max wt: 1150 lbs.
Empty wt: 640 lbs.
ROC: 500 fpm.
Cruise: 78 kts.
Seats: 2.
Pober Junior Ace
Engine: Continental C-85, 85 hp.
HP range: 85-125.
Speed max: 130 mph.
Cruise: 80 mph.
Range: 250 sm.
Stall: 38 mph.
ROC: 500 fpm.
Take-off dist: 350 ft.
Landing dist: 450 ft.
Service ceiling: 25,000 ft.
Fuel cap: 12 USG.
Weight empty: 750 lbs.
Gross: 1320 lbs.
Height: 7.33 ft.
Length: 20 ft.
Wing span: 34 ft.
Wing area: 168 sq.ft.
Seats: 2.
Landing gear: tail wheel.
Engine: Lycoming O-235.
Hp range: 65-125.
Wingspan: 26.5 ft.
Length: 17.9 ft.
Wing area: 110 sq.ft.
Empty wt: 700 lbs.
Mtow: 1320 lbs.
Fuel cap: 22 USG.
Cruise: 100 mph.
Stall: 44 mph.
Range: 410 sm.
Roc: 500 fpm.
To dist: 600 ft.
Ldg dist: 300 ft.
Cockpit width: 40 in.
Ace Aircraft Corben Junior Ace Model E
Engine: Continental, Lycoming
Horsepower: 85-120
Propeller: 2 blade metal or wood
Cabin Width: 30 or 36 inches (76 or 91 cm)
Gross Weight: 1320 lbs (600 kg)
Empty Weight: 700 lbs (345 kg)
Useful Load: 620 lbs (270 kg)
Fuel Capacity: 22 USG (83 l)
Wingspan: 26.5 ft (8 m)
Wing Area: 110 sq.ft (10.2 sq.m)
Wing Loading: 12 lbs/sq.ft (58.6 kg/sq.m)
Overall Length: 18 ft (5.49 m)
Maximum Speed VNE: 113 kt | 130 mph | 209 kmh @ sea level
Cruise Speed: 95 kts
Stall Speed(@ MTOW): 38 kt | 44 mph | 71 kmh
Service Ceiling: 10,500 ft (3,200 m)
Takeoff Distance: 600 ft (183 m)
Landing Distance: 300 ft (91.5 m)
Rate of Climb(gross): 500 fpm
Center Of Gravity Aft Limit: 18.36″
Center Of Gravity Forward Limit:11.88″
Empty Cg: 12.5″ To 13.5″
Incidence Angles: Reference: Upper Longeron
Horiz. Stab: 0.0 Degrees
Wing: +1.18 Degrees
Engine: 0.0 Degrees Vert./Hor.
Vertical Fin: 0.0 Deg. (Fuse C/L)
Control Surface Travel Ailerons: 20 Deg. Up/Dn
Elevator: 32 Deg. Up/Dn
Rudder: 27 Deg. L/R
Center Of Gravity Aft Limit=18.36″
Forward Limit=11.88″
Empty Cg= 12.5″ To 13.5″
Incidence Angles: Reference= Upper Longeron
Horiz. Stab.= 0.0 Degrees
Wing= +1.18 Degrees
Engine= 0.0 Degrees Vert./Hor.
Vertical Fin= 0.0 Deg. (Fuse C/L)
Control Surface Travel Ailerons: 20 Deg. Up/Dn
Elevator: 32 Deg. Up/Dn
Rudder: 27 Deg. L/R
Landing Gear: FG (tailwheel or trike)
Seats: 2 Side-by-Side
Acro SportInc Pober Junior Ace
Engine: Continental C-85, 85 hp
HP range: 85-125 hp
Top speed: 130 mph
Cruise: 80 mph
Stall: 38 mph
Range: 250 nm
Rate of climb: 500 fpm
Takeoff dist: 350 ft
Landing dist: 450 ft
Service ceiling: 25,000 ft
Fuel capacity: 12 USG
Empty weight: 750 lb
Gross weight: 1313 lb
Height: 7.3 ft
Length: 20 ft
Wing span: 34 ft
Wing area: 168 sq.ft
Seats: 2
Undercarriage: tailwheel
Corben Baby Ace / Ace Aircraft Baby Ace

The Corben Baby Ace of 1929 was a professional design based on the Heath Parasol, but was a little more comfortable and had much better performance because of higher power. A 40-hp French Salmson AD-9 was used. Only six were factory-built, and a few were built from magazine plans in the 1930s.
The original Corben Baby Ace first flew back in 1931.
A single seat, high wing, sport plane powered by a modified Ford Model A 4 cyl inline engine. A simple and conventional design of open cockpit, strut-braced wing and tailplane, and a fixed, strutted, undercarriage. Later up-dated and marketed as the Pober Super Ace.

In 1954, Paul Poberenzy, who a year earlier had founded the still fledgling Experimental Aircraft Association, built a Baby Ace aircraft as a three part series in Mechanix Illustrated. The success of the articles caused an explosion in the homebuilt movement. The Baby Ace that Mr. Poberenzy built for Mechanix Illustrated is now in the EAA AirVenture Museum.

The Baby Ace was extensively redesigned in 1955 as an ultralight monoplane specially designed for the amateur builder, the Baby Ace Model D. Baby Aces usually carry Continental engines rated from 65 to 85 hp and their performance is considered excellent by owners. Construction consists of a steel tube fuselage, all-wood wings and fabric covering. The wing is Clark Y mod from the root to the tip.
The Model C was refined by Ed Jacobs as the Model D. This first flew, as the DuCharme/EAA Baby Ace, on 16 November 1956.
In 1961 Ace Aircraft Mfg Co (Edwin T Jacobs), McFarland WI, purchased Baby Ace rights from Cliff DuCharme, West Bend WI.
Plans offered in 1968 for single-place Baby Ace ($28.50) and two-place Junior Ace, or Model E ($36.50). The kit price in 2009 was US$18950.
Variation:
Dunn D-1
Specifications:
Engine: Szekley, 40 hp
Wingspan: 28 ft 8 in
Length: 17 ft 5 in
Height: 6 ft 0 in
Speed: 85 mph
Seats: 1
Baby Ace Model D
Engine: Continental C-65, 65 hp.
Hp range: 65-120.
Gross Wt. 950 lb.
Empty Wt. 575 lb.
Fuel capacity 17 USG.
Wingspan 26 ft 5 in
Length: 17 ft 9in
Wing area: 112 sq.ft.
Top 110 mph.
Cruise 90-100 mph.
Stall 34-38 mph.
Climb rate 1200 fpm.
Takeoff run 200ft.
Landing roll 250 ft.
Range 350-400 sm
Cockpit width: 34 in.
Seats: 1.
Ace Aircraft Corben Baby Ace Model D
Engine: Continental, Lycoming
Horsepower: 65-100
Propeller: 2 blade metal or wood
Cabin Width: 24 inches (61 cm)
MTOW Weight: 950 lbs (430 kg)
Empty Weight: 575 lbs (260 kg)
Useful Load: 375 lbs (170 kg)
Fuel Capacity: 17 USG (64 lt)
Wingspan: 26.5 ft (8 m)
Wing Area: 110 sq.ft (10.2 sq.m)
Wing Loading: 8.6 lbs/sq.ft (42 kg/sq.m)
Overall Length: 17.9 ft (5.46 m)
Maximum Speed VNE: 96 kts | 110 mph | 177 kmh @ sea level
Cruise Speed: 87 kts | 100 mph | 161 kmh
Stall Speed(@ MTOW): 30 kts | 34 mph | 55 kmh
Service Ceiling: 10,500 ft (3,200 m)
Takeoff Distance: 300 ft (91.5 m)
Landing Distance: 250 ft (76 m)
Rate of Climb(gross): 1200 fpm | 6 m/s
Centre of Gravity Aft Limit: 18.36 in
Centre of Gravity Forward Limit: 11.88 in
Empty Cg: 12.5 in To 13.5 in
Incidence Angles: Reference: Upper Longeron
Horiz. Stab: 0.0 Degrees
Wing: +1.18 Degrees
Engine: 0.0 Degrees Vert./Hor.
Vertical Fin: 0.0 Deg. (Fuse C/L)
Control Surface Travel: Ailerons: 20 Deg. Up/Dn
Elevator: 32 Deg. Up/Dn
Rudder: 27 Deg. L/R
Landing Gear: FG (tailwheel or trike)
Seats: 1
Corben

Orland G. “Ace” Corben designed and marketed the first homebuilt aircraft kit beginning in 1923; the “Baby Ace”; followed by the “Junior Ace,” the “Cabin Ace” and the “Super Ace!”
The Ace Aircraft Manufacturing Company was established in Wichita, Kansas in 1929 by Orland Corben to market the world’s first homebuilt aircraft, a machine of his own design called the Baby Ace. The enterprise did not last long before US regulations changed to restrict homebuilt aircraft, and Corben was forced to stop marketing his design.
He next commenced operations in Madison, Wisconsin in 1931 under the name Corben Sport Plane and Supply Company and produced a prototype sports plane known as the Super Ace. This endeavor soon languished, and the company remained dormant until Paul Poberezny purchased its assets for $US 200 in 1952. This included plans to three aircraft designs and a variety of components.
Poberezny was one of the founders of the Experimental Aircraft Association in 1953 and was approached by Mechanix Illustrated magazine the following year to write a series of articles on building an aircraft at home. Their publication caused considerable demand for plans, but Poberezny felt compelled to divest himself of marketing them in order to avoid any potential conflict of interest with his position within the EAA.
Since then, the rights have changed hands several times. They were purchased from Poberezny by Cliff Du Charme of West Bend, Wisconsin, who sold them to Edwin T. Jacob of McFarland, Wisconsin in 1961. Mr. Jacob sold them in 1965 to Thurman Baird of Asheville, North Carolina, who also owned the rights to the American Flea and the Heath Parasol aircraft. The rights were purchased from Baird’s estate in 1986 by Denny Meadows of Chesapeake, West Virginia, who sold them to Bill Wood of Toccoa, Georgia in 1998.
The Corben Aces have been modernised and refined by Paul Poberezny, Cliff DuCharne, Thurman Baird, Denny Meadows and others over the years. These aircraft are still being built, flown.
Bill Wood, the owner of the Ace Aircraft Company, at Toccoa Georgia Airport (KTOC) maintains the marketing and kit production.
Copin 1909 tractor

The 1909 Copin tractor biplane was designed and built by Georges Copin in France.
Span: 32’10”
Length: 26’3″
Weight: 440 lb
Copin-Revillard Monoplane

One of two monoplanes built by the former assistant manager of the Borel flying school.
Copin opened his own facility “G. Copin Aéroplanes et Cie.” at Chalons and built the two machines in 1911. One with a Chenu inline engine, the other powered by an 80 hp Gnôme–not flown until 1912.




Span: 29’6″
Length: 24’7″
Speed: 68 mph