CRJ-440
Engines: 2 x General Electric CF34-3B1 Turbofans, 9220 lb thrust.
Engines – Power
Canadair CRJ / RJ 100 / RJ 200

The CRJ concept evolved from a stretched design of the Challenger business jet. Stretched versions of this aircraft go back to 1981 with the 24-seat CL-600. Bombardier then looked at a stretch of the CL-601 Challenger in 1987, which lead to the formation of the Regional Jet programme on 31 March 1989; the world’s first 50-seat jet airliner.
Canadair CRJ / RJ 100 / RJ 200 Article
The fuselage cross-section of the Challenger formed the basis and advanced design commenced in November 1987, the basic configuration frozen in June 1988, and the RJ (Regional Jet) Programme launched in March 1989.
The new airliner is based on the CL-601 3A version of the Challenger (first introduced in September 1986). The wing has been re configured to reduce drag at the Mach 0.8 max cruising speed, increased by span by 1.8 metres, but retains the CL601 winglets. The fuselage is stretched 6.1 metres by plugs both forward and aft of the wing, and additional emergency exits have been introduced. The 50 seat layout features 4 abreast seating, two each side of the aisle. The cockpit wind¬screen area is strengthened and the baggage compartment door enlarged. The undercarriage is beefed up and larger tyres are fitted. Simplified avionics and navigation systems have been introduced, reflecting the lesser requirements of short haul service. Power plants remain the same two General Electric CF34 3A turbo fans delivering 9220 lb thrust, although thrust reversers have been fitted to reduce stopping distance. While the original idea was to have maximum commonality with the Challenger, this has not quite worked out in practice. Because of the tougher environment the RJ will have to work in, most items in the structure have strengthened. Assembly takes place in Montreal alongside the Challenger.
An extended-range CRJ100ER announced September 1990. Three development CRJ Series 100 aircraft were built, plus a static test airframe and forward fuselage test article. The first aircraft rolled out on 6 May 1991 and first flew on 10 May 1991.
Transport Canada type approval (CRJ100 and CRJ100ER) was granted on 31 July 1992, and the Japanese Civil Aviation Bureau certification on 23 May 2000.
As at February 1993, the company had firm orders for 36 aircraft, condi¬tional orders for another two, and 34 options. In addition, Memorandums of Understanding for a further 74 aircraft were held. Production rate was two per month, and deliveries had been made of six aircraft (five to launch customer Lufthansa City Line and one to Xerox as a corporate shuttle). The first delivery aircraft flew on 4 July 1992, and was delivered to Lufthansa Cityline of Germany on 29 October 1992. Lufthansa operations commenced in November 1992.
European JAA and US FAA certification were received on 14 and 21 January 1993 respectively, with the long-range CRJ100LR certified on 29 April 1994.
The CRJ200 with CF34-TB1 engines was announced in 1995, replacing the CRJ 100 in production after 226 CRJ100had been delivered. The CRJ’s wing is an advanced airfoil that is manufactured as a single unit. Each wing has one fuel tank and, together with the centre tank, hold a total of 8230 lt. Atlantic Southeast Airlines ordered 30 in April 1997 (with options for 60 more), joining other Delta Connection operators Comair, SkyWest and Mesa.
The CRJ 200ER is an extended range derivative, customers for which include Atlantic Coast Airlines, which has ordered 12 aircraft and held options on 36 more.
Up to May 1999, Bombardier had delivered 306 of the 50-passenger CRJ-200 jets, having received 549 firm orders, as well as options for 254 of the aircraft.

200th aircraft delivered (to Lufthansa) 24 October 1997; 300th to Atlantic Coast Airlines in April 1999. 400th to Delta Connection/Sky West in July 2000. 500th to Atlantic Coast Airliners 26 April 2001, and 600th to Atlantic Southeast Airlines 29 January 2002, and 700th to Air Nostrum 30 October 2002. Production of CRJ200 running at 9.5 per month in 2000, rising to 12.5 per month by late 2001, and 14.5 per month by 2003.
Bombardier sought to sell the CRJ program to further reduce their debts and focus on their profitable side of aviation business – Business aircraft. In 2019 Mitsubishi Heavy Industries purchased Bombardier’s CRJ program for $550 million and was liable to pay Bombardier’s CRJ program debts, which stood at an approximate amount of $200 million. At the same time, Bombardier’s Learjet, Challenger and Global brands will be united under Bombardier Aviation.
VERSIONS
CRJ –100
Original standard aircraft.
Engineering designation CL-600-2B19.
Engines: 2 x General Electric CF34-3A1.
Seats: 50.
Cruising speed 424kts (786km/h).
Range with 50 passengers 1,815km (980nm).
Weight empty 13,236kg (29,180 lb).
Maximum take off weight 21,523kg (47,450 lb).
Span 21.21m (69ft 7in).
Length 26.77m (87ft 10in).
Wing area 54.0 sq.m (581.1 sq.ft).
CRJ-100ER
Replaced by CRJ200ER.
CRJ-100LR
Announced March 1994
Launch customer, Lauda Air of Austria
Replaced by CRJ200LR.
CRJ-200
Standard aircraft; designed to carry 50 passengers over 1,824km range; CF34-3B1 engines with 2.8 per cent lower specific fuel consumption than CF34-3A1 of CRJ100, increasing initial cruise altitude by 213m, cruising speed by 4.5km/h, and range typically by 1.5 per cent; Class C baggage compartment as standard.
First delivery to Tyrolean Airways, 15 January 1996.
CRJ-200B
With optional hot-and-high CF34-3B1 engines.
CRJ-200ER
Extended-range capability with optional increase in maximum TO weight to 23,133kg and optional additional fuel capacity, for range of 3,046km.
Engines: 2 x General Electric CF34-3B1 Turbofans, 9220 lb thrust.
Seats: 50.
Max cruise: 0.81M.
Range: 1645nm @ 0.74M.
Ceiling: 41,000 ft.
Length: 26.77m.
Height: 5.84m.
Width: 21.24m.
Max ramp wt: 23.24 tonne.
MTOW: 23.13 tonne.
CRJ-200B ER
With optional hot-and-high CF34-3B1 engines.
CRJ-200LR
Longer-range version of CRJ200ER (more than 3,713km; maximum T-O weght increased by 907kg to 24,040kg.
Engines: 2 x General Electric CF34-3A1.
Seats: 50.
CRJ-200B LR
With optional hot-and-high CF34-3B1 engines.
CRJ-440
Engineering designation CL-600-2B19.
Version seating 44 passengers in standard configuration.
Launch customer Northwest Airlines has ordered 75.
CRJ-700
Corporate Jetliner
Company shuttle version with more spacious cabin accommodation for 18 to 30 passengers. One delivered June 1993 to Xerox Corporation. Five ordered by the People’s Republic of China in January 1997. Supplanted from September 2002 by corporate version of Challenger 800.
Challenger 800
Corporate version developed in consultation with launch customer TAG Aeronautics Ltd to meet requirement for non-stop flights, London to Jeddah or equivalent, with three crew and five passengers; or between Middle East city pairs with 15 passengers.
First flown 26 May 1995 and formally announced at Paris Air Show in the following month; initially designated Canadair Special Edition; first delivery to TAG during Dubai International Aerospace Show in November 1995.
Accommodation for up to 19 passengers in customised cabin; additional 1,814kg of fuel carried in two auxiliary tanks behind main cabin, extending range to more than 5,556km and maximum T-O weight 24,040kg
First aircraft powered by standard CF34-3A1 turbofans, but subsequent examples are equipped with CF34-3B1s increasing range to 5,778km. Manufactured to special order only. Customers include Poly Technologies lnc, which ordered two on 16 August 2001 for operation by China Ocean Aviation Group.

Canadair Learstar 600 / CL-600 Challenger

Lear’s brief collab¬oration with Canadair led to the LearStar 600, subsequently re¬named Challenger 600 after Canadair bought the manufacturing rights.
The initial Challenger 600, of which 83 were built, had Avco Lycoming ALF 502s and, on retro-fitted aircraft, winglets, and was flown for the first time on 8 November 1978, near Montreal. During the 50 minute first flight, the air¬plane climbed to 9,500 feet, the gear was cycled and various basic maneuvers were performed. The Challenger began certification flight testing in March 1979 with Lycoming ALF 502s of 7,500 pounds thrust (up from 6,700 pounds) and reduced elevator span to discourage flutter.
Canadair CL-600 Challenger Article
The second and third prototypes flew in March and July 1979.
On 3 April 1980, a test flight with the first prototype above the Mojave Desert ended in a disaster, with the airplane crashing due to a deep stall. In August 1980, certification was granted with temporary restrictions. Deliveries of the CL-600, powered by two Lycoming ALF-502L turbofans started on 30 December 1980, first flown on 21 September 1979.

The design was developed further and on 10 April 1982 the Challenger 601, a refined version with the more powerful General Electric CF-34 engines and winglets, made its maiden flight. In 1983, the CL-601 replaced the CL-600 in production.
Sales to 1990 exceeded 140.
The first 601-1A delivered on 6 May 1983.
The first 601-3A flew on 6 May 1987 and the first 601-3A/ER on 19 May 1989.
The Canadair CL-601 Challenger 3A completed Canadian certifica¬tion on 21 April 1987, less than 10 months after its roll-out on 18 July 1986. FAA cer¬tification was confirmed on 30 April and the first delivery was made on 6 May, to TAG Aeronautics. The first production aircraft made its public debut at the Paris Air Show in June.
Based on the CL-601 — the version of the Challenger that introduced General Electric CF34 turbofans in the original CF-600 air¬frame — the Challenger 601-3A incorporates four significant developments. These are the improved CF34-3A engines to provide better climb and hot day take-off performance; a fully integrated digital avionics suite with higher reliability and improved diagnostics; a power-assisted passenger door and two land¬ing lights mounted in the nose. A “glass’ cockpit features dual Sperry flight guidance systems, a five-tube, four-colour Sperry FF15 with multi-functional display and four-colour digital weather radar; dual Sperry flight management systems; dual Honeywell laser IRS and a comprehensive Collins Pro Line II communications/navigation package.
In 1986, Bombardier Aerospace bought Canadair. The Bombardier Challenger became a family of business jets. A number of models entered production including in 1989 the CL-601-3R, an extended range version with an extra fuel tank added to the aircraft’s tail, a 2 crew and up to 19 passengers.
The number of models in 1989 included the CL-600-2B16 or Challenger 604 powered by CF-34-3B engines. First flight with these engines was on 17 March 1995, with Transport Canada certification granted that September. First delivery was in January 1996.
The first 601-3R flew on 14 July 1993, and the first 604 on 25 January 1996.
The Royal Australian Air Force Challenger CL-604 special purpose VIP transports are operated by the Royal Australian Air Force’s No 34 Squadron, based at Defence Establishment Fairbairn in Canberra. The Challenger has a crew of three (pilot, co-pilot and attendant) and carries up to nine passengers.
The Challenger CL-604 is fitted with a high-tech wing, high bypass CF34-3B engines, and a Collins ProLine 4 glass cockpit. The Challengers joined the RAAF VIP fleet in July 2002.
Challenger certified for operation in 40 countries by 1998. 500th Challenger rolled out 25 May 2000 and handed over 1 September 2000; 600th was undergoing interior outfitting in March 2003.
CL-600 Challenger
First built: 1978.
Engines: 2 x Lycoming ALF-502L, 7500 lbs thrust.
Seats: 11/28.
Length: 68.4 ft.
Height: 20.7 ft.
Wingspan: 61.8 ft.
Wing area: 450 sq.ft.
Wing aspect ratio: 8.5.
Maximum ramp weight: 40,550 lb
Maximum takeoff weight: 40,400 lb
Standard empty weight: 18,600 lb
Maximum useful load: 21,950 lb
Zero-fuel weight: 27,500 lb
Maximum landing weight: 36,000 lb
Wing loading: 89.7 lbs/sq.ft.
Power loading: 2.69 lbs/lb.
Maximum usable fuel: 16,725 lbs.
Best rate of climb: 3600fpm.
Certificated ceiling: 45,000 ft.
Max pressurisation differential: 9.3 psi. 8000 ft cabin alt @: 45,000 ft.
Maximum single-engine rate of climb: 1045 fpm @ 170 kts.
Single-engine climb gradient: 368 ft/nm.
Single-engine ceiling: 29,000 ft.
Maximum speed: 480 kts.
Normal cruise @ 43,000ft: 425 kts.
Fuel flow @ normal cruise: 2105 pph.
Stalling speed clean: 137 kts.
Stalling speed gear/flaps down: 113 kts.
Turbulent-air penetration speed: 280 kts.
Range : 4017 nm / 7440 km
Canadair CL-601 Challenger
light airliner, corporate jet, transport, Canada, 1986
Engine: 2 x CF 34 A1, 39829 N / 4060 kp
Length: 68.57 ft / 20.9 m
Height: 20.669 ft / 6.3 m
Wingspan: 64.304 ft / 19.6 m
Wing area: 519.901 sqft / 48.3 sq.m
Max take off weight: 43107.8 lb / 19550.0 kg
Weight empty: 19955.3 lb / 9050.0 kg
Payload: 23152.5 lb / 10500.0 kg
Max. speed: 460 kts / 851 km/h
Cruising speed: 442 kts / 819 km/h
Initial climb rate: 4527.56 ft/min / 23.00 m/s
Service ceiling: 41011 ft / 12500 m
Wing load: 83.03 lbs/sq.ft / 405.00 kg/sq.m
Range: 3440 nm / 6370 km
Crew: 2
Payload: 19 Pax
Challenger CL-601-3A
Power Plant: Two x General Electric CF34-3A turbofans each flat-rated at 9,140 lb St (4 146 kgp) including automatic power reserve (five-minute limit), up to 70 deg F at sea level.
Cascade-type fan air thrust reversers.
Fuel capacity, 2,451 US gal (9 278 1).
High speed cruise, 459 kts (850 km/h) or Mach = 080
Normal cruise, 442 kts (819 km/h) or M =077
Long-range cruise, 424 kts (786 km/h) or M = 074
Time to climb to initial cruise altitude, 23 mm
Max operating altitude, 41,000 ft (12 497 m)
Single-engine ceiling, 24,000 ft (7 315 m)
Take-off balanced field length, 5,400 ft (1 646 m)
Landing dis¬tance, 3,300 ft (1 006 m)
Max range, (NBAA IFR reserves, long-range cruise), 3,430 naut mls (6 352 kin) with five passengers.
Typical operating weight empty, 24,685 lb (11197 kg)
Max fuel load, 16,665 lb (7 559 kg)
Payload with max fuel, 1,900 lb (862 kg)
Max payload, 4,815 lb (2 184 kg)
Max take-off weight, 43,100 lb (19 550 kg)
Max zero fuel weight, 29,500 lb (13 381 kg)
Max landing weight, 36,000 lb (16 329 kg).
Wing span, 64 ft 4 in (19,61 m)
Overall length, 68 ft 5 in (20,85 m)
Overall height, 20 ft 8 in (6,30 m)
Wing area, 450 sq ft (41,81 sq.m)
Wing sweepback at quarter chord line, 25 deg
Undercarriage track, 10 ft 5 in (3,18 m)
Wheel¬base, 26 ft 2½ in (7,99 m).
Flight crew: two
Accommodation: 12 – 15.
Cabin length, 28 ft 3 in (8,61 m)
Max height, 6 ft 1 in (1,85 m)
Max width, 8 ft 2 in (2,49 m)
Cabin volume: 1,150 cu ft (32,56 cu.m)
Bombardier Challenger CL-604
Engines: Two General Electric CF34-3B turbofans (9,220 lbs thrust each)
Length: 20.86m
Height: 6.3m
Wingspan: 19.61m (including winglets)
Max takeoff: 21,863kg
Max landing: 17,236kg
Normal ops Speed: 870km/h
Range: 5,600km (with max fuel and reserves)
Ceiling: 41,000 feet
Crew: Two pilots and one crew attendant
Accommodation: 9 passengers

Canadair CL-215 / CL-415

Designed principally for firefighting duties, the CL-215 twin-engined general-purpose amphibian also has military applications, including search and rescue and coastal patrol, Spain and Thailand use their CL-215s in both of these roles. The first prototype flew on October 23, 1967.
The CL-215’s two fuselage tanks hold 1412 USG / 5345 lt of water which can be scooped up in 10 seconds from a lake or sea surface, and can be dumped in one second.

Canadair offers a number of special military configurations, including flight inspection, maritime surveillance using an ALL AN/APS-128 search radar, electronic warfare support and training, cargo transport, and airborne early warning (AEW).
Production of the basic CL-215 was completed with delivery in 1990 of the 126th airframe, having been exported to France, Greece, Spain, Italy, Yugoslavia, Thailand and Venezuela.

In September 1986 Canadair announced the CL-215T turboprop development. Designed as a retrofit package for existing operators of the piston-engined aircraft and – if sufficient new orders were received – for full production, the CL-215T has two 2,380 shp (1 175 kW) PW123AF engines driving four-bladed propellers. As a water-bomber (its primary mission) the CL-215T will carry 6,132 litres (1,620 US gal).
The first CL-215T flew on 8 June 1989 powered by two 2380 shp / 1775 kW Pratt & Whitney Canada PW123AF turboprops, and could carry 1620 USG / 6132 lt of water.
Canadair CL-415 Operation 1996
CL-215
Engines: 2 x Pratt & Whitney R-2800-CA3, 1566kW, 2100hp
Wingspan: 28.6 m / 93 ft 10 in
Wing area: 100.33 sq.m / 1079.94 sq ft
Length: 19.82 m / 65 ft 0 in
Height: 8.92 m / 29 ft 3 in
Max Take-off weight: 17100-19731 kg / 37699 – 43500 lb
Empty weight: 12161 kg / 26811 lb
Max level speed: 172 mph (293 kph) at 10,000ft/3050m
Cruise speed: 291 km/h / 181 mph
Initial ROC: 1000 fpm / 305 mpm
Range: 2095 km / 1302 miles
Payload: 5453kg 12,000 lb of water, 3864 kg / 8518 lb freight, or 26 passengers

Canadair CL-84

With a research and development period from 1958 to 1963 before the first prototype was constructed, the design incorporated a number of innovations including a large chord wing which was to be covered by the propeller slipstream, all engines, rotors, and the tail rotor which were connected together by intricate shafts and gear boxes, and a stability augmentation system for reduction of pilot workload in low-speed flight conditions. There was considerable scale model testing in Canadian wind tunnels to ensure the design.
The CL-84 had a maximum height of 14 feet, seven inches, and a rotor tip-to-tip length of over 4.2m. The wings had a total area of 21.6sq.m with the trailing and leading edge flaps having of 4.7sq.m. The empty weight of the plane was 3380kg. In a maximum payload configuration, the plane could be loaded to 675kg for a pure VTOL mission, with 1620kg of payload available in a STOL or conventional mission.
The prototypes weighed about 3600kg, and the wings were 10m in length Mounted on the underside were a pair of Lycoming T53-LTCIK-4A turboprop engines with 4.3m-diameter propellers.
The horizontal tail was relatively low so that it was below the wing wake during cruising flight and always within the slipstream of the wing-tilt angle. The placement within the slipstream was to prevent abrupt changes in pitching moment as a function of wing-tilt angle.
Pitch control was provided by a pair of horizontally-mounted two-bladed propellers mounted on the rear of the aircraft. When in conventional flight, the props were stopped to minimize drag.
Roll control was maintained by differential thrust from the main engines while ailerons accomplished yaw control. A so-called mixing box brought all the control forces together to act as one as it linked the elevators, rudder, ailerons, and propeller blade angles together.
The first of four prototypes was built in two years, with the first vertical flight achieved in May 1965, followed by its first conventional flight seven months later.
The first total transition flight was accomplished on January 17, 1966, at the company’s Montreal facility. Transition was made from hover to forward flight and back. Flights were made in light snow with wind gusting to 25 miles per hour. The flight, with company pilot W.S.Longhurst at the controls, came seven months ahead of schedule.
The CL-84 was able to lift 2930kg of fuel and payload in a STOL take-off, or 1850kg of fuel and payload in a VTOL mode. It was found a 65km/h wind could double the VTOL payload capability.
An advantage of the CL-84 came from the pilot’s seat where it was piloted pretty much like a conventional aircraft. The pilot sat in the left seat, but dual controls were fitted. Even with its complex control mechanisms, the control stick and rudder pedals produced the desired control functions. A new flying technique wasn’t necessary. The pilot could fly the plane without knowing the wing angle.
Significant flying maneuvers were accomplished during the test program, including forward flight from hover (wing tilt 88 degrees) to 60km/h (wing tilt 48 degrees) and return to hover mode, demonstration of adequate control in winds gusting to 45km/h, rearward, sideward, and turning flight in and out of ground effect, and sustained flight with hands free of the controls.
By April 1966, the CL-84 began investigation into the high-speed regime followed undercarriage retraction tests, with speeds up to 370km/h in 60-degree banked turns being achieved. Other significant test accomplishments occurred during low-speed maneuvers. For example, the CL-84 easily completed 2G turns at only 165km/h, followed by 60m radius turns at 90km/h.
The plane also demonstrated exceptionally stable hovering flights, including hands free flight, and the CL-84 was hovered and landed vertically with the stability augmentation system not operating.
The first prototype was flown for two years by 16 pilots for a total of 145 flying hours. A number of military applications were tested, including dropping of external stores, mini-gun firing, simulated rescues from hover, use of a cargo sling, joint operations with a helicopter at seas, and hover downwash tests. A number of United States teams also evaluated the plane.
The first prototype was lost in a reliability test accident in September 1967, both pilots ejecting safely from the plane. The aircraft was flying at 980m at 280km/h in a forward velocity mode when the plane yawed to the left and quickly pitched downward. The investigation that followed identified the probable cause as a propeller failure. The plane was on its 306th test flight when the incident occurred.
The program continued with the construction of the three additional versions which incorporated a number of design changes from the original. Only two of them would actually fly. Two of the planes would be involved in non-fatal accidents due to mechanical problems.
The additional prototypes were built between February 1968 and February 1970. The testing of them would continue until 1974, over 20 years since the design work had started.
The CL-84 was demonstrated to the US Navy and the USS Guam also hosted a number of both STOL and VTOL flights from its deck. A flying demonstration took place off a hundred-square-foot pad at the Pentagon.
Neither the United States or the Canadian government showed enough interest to bring the program into production.
The second of the three prototypes produced is on permanent display at the National Aviation Museum of Canada in Ottawa. This particular plane made 196 flights with almost 170 flight hours. The plane was donated to the museum by Canadair in 1984.
Canadair CL-84
Engine: 2 x Lycoming LTC1K-4C turboshaft, 1119kW
Wingspan: 10.16m
Length: 14.41m
Height with wing in horizontal position: 4.34m
Height with a wing in 90deg position: 5.22m
Take-off weight vertical start: 5715kg
Take-off weight with a shortened run: 6577kg
Empty weight: 3827kg
Max speed: 517km/h
Cruising speed: 497km/h
Range: 547km

Canadair CL-44 / CC-106 Yukon

The RCAF was looking for replacements for it’s C-54GM North Star to provide personnel and logistics support for Canadian Forces in Europe. Canadair had already acquired a licence for the Bristol Britannia and announced in January 1957 plans for a fleet of long range transports based on the Britannia. Canadair received a contract for 8 aircraft, later increased to 12, designated CL-44-6 and CC-106 by the RCAF. The design used the modified Argus wings and controls. The fuselage was almost identical to the Britannia 300 with two cargo doors on the left-hand side. The cabin was pressurised to maintain a cabin altitude of 2.400m at 9.000m (30,000 ft). The Yukon could accommodate 134 passengers and a crew of nine and in the casualty evacuation role it could take 80 patients and a crew of 11. The RCAF had specified the CL-44 to be equipped with Bristol Orion engines but when the British Ministry of Supply dropped the Bristol Orion, the RCAF decided to use the Rolls Royce Tyne 11.
The roll out of the Yukon was a disaster all over. When the prototype was supposed to be pushed out of the hangar the tail was too high. The first plane took off 15 November 1959.

During test flights all kind of problems where encountered from complete electrical failure to engines shaking loose and almost falling off. Rolls Royce had problems delivering engines resulting in “Yukon gliders” being parked outside Canadair as late as 1961.
Once in Service the Yukon proved very well and on December 1961 a Yukon set a world record for its class when it flew 10.860 Km (6.750mi) from Tokyo to Trenton, Ontario, in 17 hours three minutes at an average speed of 640 Km/h (400 mph). Later a Yukon even set a new record staying airborne for 23 hours and 51 minutes. These records stayed untouched until broken by the new 747SP in 1975. Eleven Yukons flew for 437 Transport Squadron. Two flew as VIP transports for 412 Squadron.
The RCAF needed an aircraft, which could operate as an in-flight refuelling tanker, and there was a chronic shortage of spares as the CL-44 had never gone into large-scale production. Consequently spare parts tended to be in short supply and relatively expensive. All Yukons were sold to South American and African operators since it could not be registered in Northern America or Europe since the Britannia windshields did not meet new security standards. The Yukons retired in March 1971 and were replaced by Boeing 707.

At a similar time as the Yukon contract came in Canadair announced its intentions to re-enter the civilian market with a slightly modified Yukon. The plane generated little interest with the passenger airlines, but cargo airlines found the cost projections made by Canadair compared with the high operating cost of Super constellations and DC-6B interesting.
The Flying Tiger Line and Seaboard World Airlines pushed Canadair to develop a system to load and unload the 29.5 tons of cargo in 45 minutes enabling turn-around in less then 60 minutes. This became the “Swingtail”. After the initial eight Yukons, Canadair built the first civilian CL-44 with a swingtail, designated CL-44D4. The APU that the Yukon carried in the nose was removed to increase payload and Canadair built the plane without a launch customer. This Aircraft, serial #9, used as a demonstrator for many years, was built in 1960 but not sold to Loftleidir until 1965.
While the prototype was being built a problem arose as the FAA refused to certify the Britannia type windshields for its vision standards. The Convair CV880/990 windshields were compatible enough to be adopted into the flight deck structure. A requirement was set for structural fatigue testing. The CL-44 had to simulate 80,000 flight hours in a watertank to be certified for 40,000 hours.
The Flying Tiger Line ordered 12 aircraft and Seaboard World Airlines ordered 7 aircraft. Pakistan ordered five aircraft, but the Canadian government refused to issue an export permit for Pakistan for fear of offending India. Saudi Arabia withdrew their two aircraft after the Pakistan cancallation. Japan Cargo Airlines ordered three Aircraft but cancelled after Japan airlines opposed the purchase. BOAC appeared to be a certain client until their management changed and stopped the discussion. (BOAC Cargo later leased a D4 from Seaboard while waiting for their new Boeing 707).

In 1960 the USAF Military Air Transport Service (MATS) was thinking of buying up to 232 D4’s. The United States wanted Canada to bolster its northern fighter defences and proposed a deal whereby the Canadian would buy 100 F-101 Voodoo fighters plus a possible participation in the maintenance of the Pinetree early warning radar line. The quantity of D4’s had dwindled to 37 when Ontario conservatives objected on the grounds that it would be politically unacceptable to award a major aircraft contract to Quebec after having cancelled the Ontario-built Avro Arrow. MATS quickly changed their minds and bought Boeing C-135.Canadair built a Total of 39 CL-44 aircraft. 12 CC-106 Yukon and 27 CL-44D4. Seaboard World Airlines bought seven aircraft and The Flying Tiger Line bought twelve. Later Slick Airways ordered four more. This left Canadair with the unsold prototype and three CL-44D4s already finished but not sold. Canadair knew that the Icelandic low fare carrier Loftleidir was searching for alternatives to replace their ageing fleet of DC6B. Loftleidir bought those with the condition that they would all be stretched to accommodate more passengers. An engineering office in the United States on behalf of Loftleidir carried out a study to stretch the CL-44. Canadair carried out the work and the first stretched D4 flew on November 8, 1965. Loftleidir had already taken the other three D4s into service but returned them one after another in order to be converted.

Another D4 was converted by Jack Conroy Aviation of California into a CL-44-0 “Guppy”. This aircraft had its upper fuselage removed and replaced by an enlarged section, which raised the cabin height by 1.5m.The forty-four proved to be a nightmare for mechanics. But it was an extremely profitable aircraft to run. At the time the fuel burn of a CL-44 was half compared to a Boeing 707.
After 40 years, out of the 39 built, 17 either crashed or were destroyed in operation. 19 aircraft have been cut up.
No CL-44 has been preserved.

Canadair CL-41 Tutor / CT-114

Canadair started design of a jet trainer in 1958 as a private venture. Controls and systems of the Tutor are relatively simple with hydraulic power to the landing gear, flaps and nosewheel steering, and manual flying controls. The cabin is pressurized and zero-level ejection seats are fitted. It is fully equipped for navigation, instrument and night flying training. The Tutor has side-by-side seating and a single turbojet engine built by Orenda Engines in Canada.

First flown on January 13, 1960, the 190 CL 41A aircraft were built for the Canadian air force as the CT 114 Tutor, ordered into production in 1961. It was used from 1963 until 2000 when it was replaced with the CT-156 Harvard II and the CT-155 Hawk as primary jet trainers.
The Tutor is best known in North America for the formation aerobatics of the Snowbird team who have performed from the Northwest Territories to Mexico. Officially known as 431 Air Demonstration Squadron, the team had fifteen Tutors, eleven of which travel with the team during the airshow season.

In 1965 Canadair was testing a prototype of a counter-insurgency version of the CL-41. The CL-41G was being tested by the USAF Air Commando Wing at Elgin AFB, Florida. Powered by a single Canadian built General Electric Orenda J85 turbojet rated at 3000 lb thrust, the -41G test version featured two 500 lb and two 250 lb bombs under wings, with pair of GE minigun pods under the fuselage.
Following the Canadian aircraft were 20 CL 41G Tebuan light attack derivative for Malaysia, production ending in 1967.
The CL-41R features an extended, pointed nose, as an NASARR (North American Search and Range Radar) electronics training version.
CL-41
Engine: Pratt & Whitney JT-12
CL-41A / CT-114 Tutor
Engine: 2,650 lbs.t. (1202 kgp) Orenda built J85 Can 40 turbojet.
Max speed, 486 mph (782 kph) at 27,500ft (8382m)
Cruise, 356 mph (560 kph)
Initial climb, 4,420 fpm (22.45 m/sec)
Service ceiling, 44,500ft (13564 m)
Range, 944 mls (1519 km)
Empty weight, 4,840 lb (2195 kg)
Loaded weight, 7348 lb (3333 kg)
Max TO weight: 11,288 lb (5131 kg)
Span, 36 ft 4in. (11 m)
Length, 32 ft (9.75 m)
Wing area, 220 sq.ft (20.44 sq.m)
Height: 9 ft 3.75 in (2.84 m).
CL-41G Tebuan
Engine: 1 x General Electric J85-J4 turbojet, 13.1kN
Max Take-off weight: 5120 kg / 11288 lb
Empty weight: 2402 kg / 5296 lb
Wingspan: 11.13 m / 37 ft 6 in
Length: 9.75 m / 32 ft 0 in
Height: 2.76 m / 9 ft 1 in
Wing area: 20.44 sq.m / 220.01 sq ft
Max. speed: 772 km/h / 480 mph
Ceiling: 12860 m / 42200 ft
Range: 2157 km / 1340 miles
Crew: 2
Hardpoints: 6
Armament: 1814kg load
CL-41R

Canadair CL-28 Argus / CP-107

In 1949 had Canadair offered the RCAF a new maritime Patrol Aircraft based on the North Star version of the DC-4, to replace the Lancaster fleet
When the RCAF issued their specifications in 1952 Lockheed submitted a version of the Super Constellation as and Bristol submitted a version of the Britannia 100 Turboprop Airliner. In 1953 the RCAF decided on the Britannia. On February 23, 1954, Ottawa announced that Canadair would build the plane and on March 13 the licence agreement was signed. On May 27 the government awarded Canadair a contract to produce 13 maritime patrol/ASW aircraft based on the Bristol Britannia. It was designated Canadair CL-28 ARGUS.The Argus retained the Britannia’s wings, tail and the tab based flight control system. The fuselage was redesigned to accommodate two weapon bays, a forward crew compartment and a transparent nose. The turboprop engines where not considered ideal for low altitude operations, so the designers replaced the Britannia’s Proteus turboprops with 3700 bhp Wright R-3350 turbo-compound piston engines to provide the combination of high power and low fuel consumption. The Argus was equipped with latest in avionics and ASW. They ran of a fully paralleled AC electrical system. The aircraft was the first in history to synchrophase four 400-cycle systems in an aircraft.

The first Argus (VN710) made its first flight on 28 March 1957. The Argus completed RCAF acceptance trials in early 1958.

The first 13 built were Mk.1, with the American APS-20 search radar. All others Argus (22) were Mk.2 with British ASV-21 search radar with the smaller radome.

The Argus flew with 404 and 405 Sqd at Greenwood, Nova Scotia; 415 Sqd at Summerside, Prince Edward Island; and 407 Sqd at Comox, British Colombia, as Canadair CP-107 Argus.
The Wright engines were fitted for low specific fuel consumption and, on the 31 may 1974, 711, a 407 Squadron Argus Mk.1 from Comox, flew 31.1 hours straight with no external or added fuel tanks.
The Argus served for 24 years and during this time only 2 of the 33 Arguses built were lost. 20727 of 404 Squadron crashed near Puerto Rico during night exercise on March 25 1965. 10737 crashed on landing at Summerside on March 31, 1977 when it collided with a Lockeed Electra, which Canadair had modified for Ice reconnaissance work.The last operation work took place on November 10 1980, replaced by the P-3 Orion. In 1982 Bristol Metal Industries of Toronto bought 24 Arguses and melted them down on the spot. It was argued that the Canadian government did not want them to fall into the wrong hands. The remaining Arguses have found a new role as display models at Air Bases and Canadian museums.

CL-28 Argus
Engines: 4 x Wright R-3350-EA1 Cyclone, 2535kW, 3649 shp
Wingspan: 43.37 m / 142 ft 3 in
Length: 39.26 m / 129 ft 10 in
Height: 11.79 m / 39 ft 8 in
Wing area: 192.77 sq.m / 2074.96 sq ft
Max Take-off weight: 71214 kg / 157001 lb
Empty weight: 36741 kg / 81000 lb
Fuel capacity: 7188 Gal
Max speed: 507 km/h / 315 mph
Ceiling: 7620 m / 25000 ft
Service ceiling: 20,000 ft
Range: 9495 km / 5900 miles at 175-200 mph
Crew: 15
Armament: 3629kg internal weapons / 1724kg on external hardpoints

Canadair C-4 / C-5 / C-54G-M / North Star / Argonaut

The Canadair Four is a progressive development of the DC-4M-2 which embodies features if both Douglas DC-4 and DC-6, and was adapted to take four 1730 hp Merlin 620 engines.
Canadair C-4 / C-5 / C-54G-M / North Star / Argonaut Article
The DC-4M-2 is externally similar to the Canadair Four and was employed by the RCAF and Trans-Canada Air Lines. The Canadair Four has been delivered to Canadian Pacific Airlines and British Overseas Airways Corporation, the latter designating the type Argonaut.

The R.C.A.F. uses a Canadian-built version of the Douglas C-54 known as the C-54G-M North Star, with Rolls-Royce Merlin 620 engines.
A total of seventy-four DC-4Ms and Canadair Fours were built by Canadair Ltd.
The single Canadair C-5 used by the R.C.A.F. is basically a North Star with 2,100 h.p. R2800 radials.
Canadair Four
Engine: Rolls-Royce Merlin 626, 1760 hp
Wing span: 117 ft 6 in
Length: 93 ft 7.5 in
Height: 27 ft 6.5 in
Empty weight: 46,832 lb
Loaded weight: 82,300 lb
Max cruise: 325 mph at 25,200 ft
Max cruise: 280 mph 12,800 ft
Service ceiling: 29,500 ft
Passenger capacity: 40

Penhoet Flying Boat

