Dayton-Wright Airplane Co           

USA.
Formed during First World War at Dayton, Ohio, for quantity aircraft production, with Orville Wright as consulting engineer. Built Liberty-engined DH-4 (the “Liberty plane”) and Standard J-1. In 1919 built a limousine version of DH- 4, single-seat Messenger, and also a three-seater. In 1920 Milton C. Baumann designed the revolutionary RB Racer, with solid all-wood wing, totally enclosed cockpit and retractable landing gear linked to rod-operated leading and trailing-edge camber-changing flaps. Built the USB-1, an Engineering Division redesign of the Bristol Fighter; 1921 twin-engined seaplane; side-by-side two-seat TR- 3 (last rotary-engined design for U.S. Army) and singlewheel landing-gear TR-5. In 1922 built Douglas DF-2. In 1923 the parent company, General Motors, abandoned aviation and dissolved Dayton-Wright; aeronautical work of the company taken over by Consolidated Aeronautics Inc.

The Dayton-Wright Company approached the USAAS to replace their World War 1-era Curtiss JN-4 “Jenny” series of trainers and was in turn asked to deliver three TA-3 models for evaluation. Though the design itself proved promising enough, the TA-3 (designated with an “A” for its air-cooled engine operation) was delivered by request with an uprated Le Rhone engine of 110 horsepower. Still further evaluation models were ordered, this time with the requested Wright-Hispano I V-8, 150 horsepower engine of increased power (designated TW-3 with the “W” standing for its water-cooled engine process) finally culminating in an official order by the USAAS.
Production rights for the trainer were secured by the newly-created Consolidated Aircraft Company (established by Reuben Fleet of the Gallaudet firm) as General Motors was reviewing their commitment to aircraft production in a post-war world and would eventually shut down operations at Dayton-Wright altogether. The TW-3 was delivered by 1923 and became the first notable variant of the “Trusty” production line.

Day, Charles Healy

Born at Salamanca NY, December 29, 1884. Died at Pacific Palisades CA, May 26, 1955.

Charles Healy Day built his first aircraft in 1909, working with Glenn L Martin. Day is credited with developing the technique of using laminated wood to make propellers, thus increasing their strength. In 1910 he built and flew the nation’s first tractor biplane, an aircraft of his own design. He worked off and on with Martin until 1915, when he was made vice-president and chief design engineer of the Sloane Airplane Company, soon to become the Standard Aircraft Corporation. There he designed and built several aircraft leading to the famous Standard J-1 used extensively for pilot training in World War I, flying the mail, and for barnstorming in the 1920s. The J-1’s large forward cockpit held two passengers to double the pilot’s revenue per flight. It was also the aircraft used by Otto Timm in 1922 to give a young Charles Lindbergh his first taste of flying.

In the early 1920s, Day worked as an aviation consultant, and for a short time with Elektron Metals Corporation of America, developing and promoting the use of magnesium alloys in the US aircraft industry. For two years he was a consultant on light metals to the German Chemical Trust, then in 1926 he teamed up with Ivan Gates, of the Famous Gates Flying Circus, to form the Gates-Day Aircraft Company in Paterson NJ, reorganized in 1928 as the New Standard Aircraft Corporation. During that time, Day designed his most famous and enduring aircraft, the GD-24, which evolved into the D-25 and many variants, all of which had a huge front cockpit capable of carrying up to five passengers or a big load of bootleg whiskey. Needless to say, it became a mainstay of barnstormers and smugglers. The last variant of the design was built in 1942 by White Aircraft Corporation for the Department of Agriculture, and a few are still flying today.

In 1931 Day resigned his position as president of Standard Aircraft, built a small open-cockpit trainer he called the Day Model A and with his wife, Gladys, flew it around the world—excepting oceans, where it went more logically by boat. Then in 1934, after a couple of years of consulting, he accepted an offer from Chiang Kai-Shek, head of the Canton Government in China, to organize and operate an aircraft factory at Shiuchow. He got the factory up and operating in minimum time, but by 1937 it was being targeted by Japanese bombers. To defend against the bombings, Day moved his manufacturing equipment into bamboo sheds, scattered several miles into the forest. Operating under those primitive conditions, he was able to continue production of the Fushin trainer, Curtiss Hawks under license, and Russian I-15 pursuits. Practically all of the 400 employees of that factory had no previous experience with aircraft and had to be trained by Day and his staff.

In 1940, after many harrowing experiences, the factory was cut off from supplies needed to continue operation, and the Days left China. Back in New York, he was a recognized aircraft production expert. That, coupled with his recent experiences in China, put him in great demand for the lecture circuit. He wrote articles and made several speeches on the Japanese Air capabilities. Late in 1940, he became Supervisor of Aircraft Production, Department of Munitions and Supply, Ottawa, Canada.

After Pearl Harbor he was commissioned a major in the Army Air Corps and was stationed at Wellston Air Depot, now Robins AFB, GA. He resigned his commission in November 1942 to head the Glenn L Martin Modification Center at Omaha, where he remained until 1945. By that time he was having some health problems, but continued working as an aviation consultant until his death at his home.

Davis, Leon

Between 1958 and 1961 Leon D.Davis began development of the five-seater DA-1 light aircraft. Designed subsequently a number of light aircraft for construction by amateur enthusiasts. Davis was a very active designer with some 11 subsequent designs in his name (only the DA-10 was not built and the DA-4 was completed as DA-2C).
1980: Leeon D. Davis, Box 207, North St. Paul, Stanton, TX 79782, USA.

Davis Aircraft Corp

Founded at Richmond, Indiana, by Walter C. Davis to take over Vulcan Aircraft Company. Production of American Moth continued as Davis V-3, and the D-1 series of fast parasol-wing two-seaters began in 1929.
Davis Aircraft manufactured seven different Davis models in its life, and a total of approximately 60 aircraft. These aircraft included the Davis D-1 (23 aircraft), the D-1-66 (4 aircraft), the D-1-K (11 aircraft), the D-1-L (aka D-1-85 – 1 aircraft), the D-1-W (8 aircraft converted from D-1-K’s), the 1929 racer (1 aircraft) and the V-3 (22 aircraft).

Dassy, Georges

Georges Dassy was an important mechanic whose the workshops were in Schaerbeek (Brussels). He obtained a contract of the Military Aeronautics in 1927 for the overhaul and repair of engines plane, activity he continued until the explosion of the war.

Pilot and avid aviation, Georges Dassy built in 1929, a monoplane aircraft.

Dassault-Breguet / Dornier

Following agreement between the French and German governments in 1969 to procure a new subsonic basic and advanced training aircraft, suitable for deployment also in a close-support or battlefield reconnaissance role, Dassault-Breguet and Dornier developed Alpha Jet, with involvement also by SABCA in Belgium and other French and German companies. Powered by twin turbofan engines, Alpha Jet first flown in October 1973; production eventually totaled 504, the majority going to Armee de I’Air and Luftwaffe, but others to Belgium, Cameroon, Egypt (assembled by AOI), Ivory Coast, Morocco, Nigeria, Qatar, and Togo. The final versions available were the Alpha Jet basic trainer, Alpha Jet 2 strike aircraft, and Alpha Jet ATS advanced trainer with an advanced “glass”cockpit, laser designation, ECM, and more.