A three-engine biplane bomber of wood and fabric construction, the Ca.36 featured a sectioned wing assembly that could be taken apart into five pieces for easier storage. Armament was 2 x Fiat-Revelli machine guns of 6.5mm or 7.7mm caliber. As a heavy bomber, the Ca.36 could carry up to 1,764 pounds of ordnance. The Ca.36S represented an air ambulance conversion model while the Ca.36M (or “mod”) was a model designed to simplify wartime production. Operators included Italy, the United Kingdom, France and the United States of America.
Caproni Ca.36 Engines: 3 x Isotta-Fraschini V.4B, 150 horsepower Length: 36.25ft (11.05m) Width: 74.61ft (22.74m) Height: 12.14ft (3.70m) Maximum Speed: 85mph (137kmh; 74kts) Maximum Range: 372miles (599km) Rate-of-Climb: 413ft/min (126m/min) Service Ceiling: 15,892ft (4,844m; 3.0miles) Armament: 2 x 6.5mm or 7.7mm Fiat-Revelli machine guns, up to 1,764lbs of bombs Accommodation: 4 Hardpoints: 8 Empty Weight: 5,071lbs (2,300kg) Maximum Take-Off Weight: 8,378lbs (3,800kg)
Caproni Ca.22 1913 at the Omaka Heritage Centre, New Zealand in April 2009
Development of the Caproni Ca.20 led to the Ca.22, a two-seat reconnaissance fighter of parasol wing configuration similar in appearance to the earlier type with a larger propeller spinner and a Le Rhone rotary engine, being either the 60 kw (80 hp) or 75 kw (100 hp) variants, but this was later replaced by a 104 kw (140 hp) Hispano Suiza.
The fin and rudder were of triangular type and were first introduced on the type L. One innovative feature of the design was the ability to tilt the wing to increase or decrease the angle of attack, varying the angle at which the wing surface met the oncoming air and thus varying the amount of lift produced. The machine was otherwise conventional for the time.
The CA.22 served as a two-seat observation aircraft with the Italian Army’s No 15 Squadron, which had used Bleriot monoplanes before the introduction of the Ca.22 in April 1915. It is known seven examples were issued to that unit, and it would appear that this was the complete production of the type. This unit operated near Piacenza with No III Group, being commanded by Captain Umberto Rossi and was involved in the reconnaissance role. On 30 June that year the Squadron’s aircraft were dis-assembled and conveyed to Pordenone near the Austrian border from where further reconnaissance flights were made, as well as commencing bombing operations over enemy territory.
The CA.22 became known as the BH when fitted with the Hispano engine. This engine had a water jacket surrounding the crank case. The Caproni BH was replaced in service by the Model P which was supplied to both the Royal Air Force and French Air Force.
Although not built in large numbers, one example has survived and has been imported to New Zealand, joining the collection of World War I aircraft on display at the Aviation Heritage Centre at Omaka. This example was held in storage by the Caproni Museum in Italy, which was set up by Gianni and Timina Caproni, from about 1929 until imported to New Zealand and is believed to be the only survivor. This machine has been described as a virtual ‘time capsule’ as it has changed very little in the 85 years it was held in storage.
Engine: 60 kw (80 hp) Gnome Rhone Wingspan: 14.14 m (46 ft 4 in) Length: 8 m (26 ft 3 in) Height: 3.5 m (11 ft 6 in) Wing area: 13.57 m² (144 sq ft) Max speed: 125 km/h (76 mph) Empty weight: 480 kg (|1,056 lb)
One of his early fighter aircraft was the Ca.18 reconnaissance aircraft which was developed to the Ca.20, the latter incorporating a larger engine mounted under a stream-lined cowling, with shorter wings and fitted with a machine-gun for offensive operations. The Ca.20 developed in 1914 was described as an exceptional fighter and ahead of its time. It was a single-seat fighting scout of mid-wing monoplane configuration and had a fixed forward firing machine-gun above the propeller arc. Only one example was produced and for many years it was stored in Italy before being acquired by the Museum of Flight in Seattle in 1999, preserved and placed on display but keeping its original fabric covering.
The thirteenth airplane model designed and built by aviation pioneer Gianni Caproni in Vizzola Ticino. It was a two-seat, rather conventional tractor wing-warper monoplane, generally of Blériot lines, which flew for the first time in June 1912. Two examples were built, powered by 70 hp Anzani radials, which proved problematic. The “Milano I” was the second, donated by Caproni to the Società Italiana Aviazione in July 1912.
The Caproni Ca. 9, from 1911, has a structure entirely in wood, with a latticework fuselage braced with steel cables, wooden wings and tailpieces with canvas covering. The engine is a 35 hp three-cylinder Anzani Y. The landing gear features the typical anti-tip skids, characteristic of many aircraft of the pioneering period.
To commemorate the hundredth anniversary of the birth of the Trentino pioneer in 1986, the prestigious National Air and Space Museum in Washington exhibited Ca. 9 of the Caproni Museum in the “Early Flight” pavilion, models, drawings, relics, medals won by Caproni devices and a series of illustrative panels.
Having returned to Italy in 1988 and temporarily hosted by the AerSud, in 1989 the Ca.9 was exhibited in the Palazzo della Regione on the occasion of the official announcement of the project to build the new Caproni Museum in Trento. It then became a symbol of the initiative, and was again exhibited on the occasion of the laying of the first stone. Subjected to conservative interventions in America and Italy, with the inauguration of the Museum, it found its permanent home in the pioneering aircraft sector of the Gianni Caproni Museum of Aeronautics.
Engine: 35hp Anzani Wingspan 8.88 m Length 7.80 m Height 3.00 m Empty weight 220 kg Maximum speed 90 km / h
The success reported by Louis Blériot with his monoplane at the end of July 1909 in crossing the English Channel impressed a vigorous change in the tendencies of the builders of the time towards the monoplane, justified by the greater structural simplicity and better aerodynamics compared to contemporary biplanes.
Gianni Caproni joined this new trend starting from 1911 and up to the end of 1913, dealing exclusively with the construction of monoplane for school and training, in both single and two-seater versions, making more than seventy.
The first of these, the Ca. 8 single-seater, also known as the “Caproni monoplano 25hp”, flew to Vizzola on June 13, 1911 powered by a 25 hp three-cylinder fan-shaped Anzani engine.
The Ca.6 was a single-engine propeller-driven biplane with a traditional configuration with wings in the bow and tail fletching, but it had no fuselage: it was replaced by a light structure formed by two beams of unshelled wood and some vertical reinforcing uprights that supported the planes of tail. They were composed only of a stabilizer – horizontal balancer; the lack of a vertical drift was compensated by four large interwoven surfaces that, placed between the wings, contributed to the stability of the aircraft around the vertical axis. The wings resumed the double curvature profile that had also characterized Caproni aircraft immediately preceding, but with not very lucky results: the aerodynamic characteristics of this type of profile, which had been suggested to Caproni by his friend and colleague Henri Coandă, proved to be once again unsatisfactory.
The one built first flew in 1911, The Ca.6, the sixth Caproni biplane, sported the characteristic double curvature airfoil and lightened tailboom, constructed from hollowed-out wooden tubes. Still powered by the 50 hp Rebus, it was modified following some flights in spring 1911.
The Caproni Ca.6 was preserved inside the Caproni workshops until 1934, when it was brought to Milan to be shown to the public on the occasion of the Italian Air Force Exhibition; in the meantime, in 1927, the spouses Gianni and Timina Caproni founded the Caproni Museum, in whose headquarters in Taliedo the Ca.6 found a place starting from the forties. After the vicissitudes linked to the Second World War and the reopening of the museum in Vizzola Ticino, the Ca.6 was again displayed to the public. The definitive position in the Museo dell’Aeronautica Gianni Caproni, reopened in Trento, in the nineties.
The aircraft underwent a first renovation-conservation operation before being displayed in Milan, in the early thirties: it was probably on this occasion that the leading edge of the wings was reinforced with a metal strip and the fuselage and the wings themselves they were shortened. At the time of its transfer to Trento, the Ca.6 has undergone a new intervention; however, due to the lack of availability of reliable technical drawings and other necessary historical documentation, a real restoration did not take place, but only a conservation procedure.
Powerplant: 1 × Rebus 50hp 4-cyl, 37 kW (50 hp) Propeller: 2-bladed fixed pitch propeller Wingspan: 12 m (39 ft 4 in) Wing area: 45 m2 (480 sq ft) Length: 9.8 m (32 ft 2 in) Height: 3.27 m (10 ft 9 in) Gross weight: 318 kg (700 lb)
The Ca 5 series of First World War bombers were a progressive development of the earlier Ca 3 series and, like them, were biplanes. They were slightly larger overall, heavier, and somewhat faster, though their bomb load of 540 kg (1190 lb) remained modest. The initial version (Ca 44) was powered by three 200 hp Fiat engines, driving (as in the Ca 3) one pusher and two tractor propellers. Defensive armament was a single machine gun in the nose and a second to the rear. Entering service with the Corpo Aeronautica Militare in early 1918, the initial model was followed by generally similar versions (Ca 45 and Ca 46) having Fiat, Isotta Fraschini or Liberty engines. The Ca 5 continued to serve until the end of the First World War, though in dimin¬ishing numbers and for the most part on night operations, with many of the Gruppi that had operated the earlier Ca 3. A specialized night bomber variant was later given the post-war designation Ca 50.
Italian production of the Ca 5 series reached 255, to which can be added a small number built in France by Esnault Pelterie.
Two (Ca 46) bombers were delivered to the United States, where it was planned to build the type in quantity for the US Army Air Service, but only three had been completed (two by Standard Aircraft Corporation, AS40070 and 40071, and one by Fisher Body Works, AS42119) before the Armistice.
Ca.46
The American Liberty engine, however, found its way into one other variant: a torpedo and bomber seaplane (Ca 47), with twin Zari floats, of which Piaggio in Italy delivered 10 after the Armistice.
Ca 5 Engines: 300 hp Fiat A.12. Span: 23.40 m (76 ft 9.25 in) Length: 12.62 m (41 ft 4.75 in) Gross weight: 5300 kg (11685 lb) Maximum speed: 152 km/h (94.5 mph)
Ca.5 Engines: 3 x 250hp Fiat A.12 Wingspan: 22.76 m / 75 ft 8 in Length: 10.80 m / 35 ft 5 in Height: 3.80 m / 12 ft 6 in Max Take-off weight: 3870 kg / 8532 lb Empty weight: 2450 kg / 5401 lb Max. speed: 146 km/h / 91 mph Cruise speed: 121 km/h / 75 mph Ceiling: 4000 m / 13100 ft Rate of climb: 114 m/min / 350 ft/min Range: 650 km / 404 miles Armament: 4 x 6.5mm mg Bomb load: 800kg Crew: 4
Ca 46 Engines: 300 hp Fiat A.12. Span: 23.40 m (76 ft 9.25 in) Length: 12.62 m (41 ft 4.75 in) Gross weight: 5300 kg (11685 lb) Maximum speed: 152 km/h (94.5 mph)
Standard-Caproni Ca.46 Engines: three 350hp Liberty 12 Wingspan: 76’9″ Length: 41’2″ Useful load: 4650 lb Max speed: 103 mph Cruise: 94 mph Range: c.400 mi Ceiling: 14,760′ Seats: 3
In parallel with the Ca 3 biplane bomber, Caproni also evolved a comparatively small series of bomber triplanes, collectively designated Ca 4. Larger than the Ca 3, the first three Ca 4s (Ca 40) appeared in late 1917 and were powered by three 200 hp Isotta Fraschinis engines. One engine was mounted to drive a pusher propeller at the rear of the central crew nacelle, and the other two were tractor-mounted in front of the middle wing leading edge in the noses of the twin booms. The crew was increased to five, by virtue of having two separate rear gunner positions (one in each fuselage boom) instead of the single, central cage position on the Ca 3. The prototype and the first three production Ca.4s had angular crew nacelles, but all later examples of the Ca.1000HP (its initial designation arising from the total horsepower provided by the prototype’s engines) had carefully contoured rounded nacelles. A third gunner’s cockpit was located at the front of the nacelle forward of the side-by-side cockpits for the pilot and co-pilot. The first Ca 4s were underpowered, and the 12 which followed (Ca 41) were uprated to three 270 hp IF engines, having also an oval section central nacelle with tandem seating for the two pilots.
Ca.41
The principal (Ca 42) versions reverted to side by side pilot seating and were also fitted with uprated 223.6kW Fiat A.12s, 223.6kW Isotta Fraschini V.5s or 298kW Liberty engines. Even with the extra power, they were regarded as too slow for daylight operations, and were employed chiefly as night bombers, carrying up to 1450 kg (3197 lb) in a coffin shaped container between the main units of the landing gear. The Ca. 42 could carry a 1450-kg (3200-lb) bomb load over a long range, but the type was difficult to fly, and being slow, was vulnerable to fighter attack despite an arsenal of defensive weapons, including machine-guns and a cannon on some examples. Twenty-three were built, mostly for the Italian Navy, who used them on night bombing raids and in daylight against the Austrians during the final assault at Vittorio Veneto. Six Liberty-powered Ca.42s were supplied to the British Royal Naval Air Service, though they apparently never left Italy.
Variants of the triplane Ca 4 series included a twin engined, twin float torpedo bomber prototype (Ca 43), and two (Ca 51 and Ca 52) which featured a biplane tail unit, incorporating a rearward firing gun position.
The British Government requested the Italian authorities a few copies of the Ca 42 in order to evaluate it. Caproni built 6 airplane designated Ca.52, differing from the Italian model by Lewis guns paired in the front seat of the fuselage and space for British bomb sizes. They received the RNAS serials N526 to N531 and were used briefly by No. 6 Squadron in Otranto (Italy) and then returned to Italy.
Total production of all versions of the Ca.4 was 42. One Ca.4 was converted to a seaplane by the substitution of huge twin floats for the land undercarriage. Post-war, the Ca.48 23-passenger conversion made a notable flight from Milan to London in 1919. Another civil conversion for 30 passengers was tested the following year under the designation Ca.58.
Ca.4 Engines: 3 x Isotta-Fraschini, 190kW Max. speed: 126 km/h / 78 mph Ceiling: 3000 m / 9850 ft Crew: 4 Armament: 4 x 6.5mm machine-guns, 1450kg of bombs
Ca.40 Engines: 3 x Fiat or Isotta-Fraschini, 200 hp. Gross weight: 6440-kg (14,200-lb). Maximum speed: 125 kph (78 mph).
Ca.41 Wing span: 130 ft.
Ca.42 Engines: 3 x Liberty, Fiat, or Isotta-Fraschini, 270-hp Span: 29.90 m (98 ft 1.25 in) Length: 15.10 m (49 ft 6.5 in) Gross weight: 7500 kg (16535 1b) Maxi¬mum speed: 140 km/h (87 mph) Ceiling: 9840 ft Range: 7 he Crew: 5 Armament: 4 x mg Bombload: 3910 lb