EOLE 2000 was in Paris Rue de Charenton near the Bastille and the boss was Patrick Anet Biscueil. He worked with Eric Bunodière and Gilles Bru in 1979 before they formed Air Creation for Gille Bru and Prodelta for E.Bunodière.
EOLE 2000 was a dealer in 1979 of the Belgian brand: Fulmar
A 1985 hang glider. The Foil 160B tended to be difficult with yaw at stupid airspeeds.
The Enterprise Wings Foil 152C, Upside: A very light handling, predictable, fun and safe glider with a respectable glide angle for its era. Only downside: The keel was long, meaning an overflare could easily end up in a broken keel.
The Foil Combat is a 1991 hang glider for Advanced pilots.
The Foil Combat 2 is stable, predictable and responds quickly. It climbs and glides well. Like most performance gliders of this age it’s heavy, has loose side wires ground handles poorly but flies great.It lands fine but needs a good flare.
The Foil Racer first appeared in 1987. The Foil 150B Kevlar Race was a great glider especially in thermals but you had to look out to not stall a wing under certain circumstances, easy landing, not the best setup and heavy for the size.
Foil 140
Wing area: 13 m²
Aspect ratio: 6.5
Hang glider weight: 27 kg
Foil 150
Wing area: 13.9 m²
Aspect ratio: 6.8
Hang glider weight: 28 kg
Foil 160
Wing area: 14.8 m²
Aspect ratio: 7
Hang glider weight: 30 kg
Foil 170
Wing area: 15.8 m²
Aspect ratio: 7
Hang glider weight: 32 kg
Foil Combat 152
Wing area: 14.1 m²
Wing span: 10.13 m
Aspect ratio: 7.3
Hang glider weight: 34 kg
Minimum pilot weight: 60 kg
Maximum pilot weight: 90 kg
Minimum speed: 29 km/h
Maximum speed: 80 km/h
Max glide ratio (L/H): 10.27
Max glide ratio speed: 40 km/h
Minimum sink rate: 0.98 m/s
Packed length short: 3.85 m
Number of battens: 35
Nose angle: 130°
Foil Combat 2 139
Wing area: 12.9 m²
Wing span: 9.7 m
Hang glider weight: 31 kg
Minimum pilot weight: 50 kg
Maximum pilot weight: 75 kg
Packed length: 5.5 m
Packed length short: 3.8 m
Number of battens: 29
Nose angle: 127°
Foil Combat 2 152
Wing area: 14.1 m²
Wing span: 10.1 m
Hang glider weight: 34 kg
Minimum pilot weight: 60 kg
Maximum pilot weight: 95 kg
Packed length: 5.6 m
Packed length short: 3.8 m
Number of battens: 33
Nose angle: 127°
Foil Racer
Wing area: 13 m²
Wing span: 9.14 m
Aspect ratio: 6.5
Hang glider weight: 27 kg
Nose angle: 130°
Foil Racer
Wing area: 13.9 m²
Wing span: 9.7 m
Aspect ratio: 6.8
Hang glider weight: 28 kg
Nose angle: 130°
Foil Racer
Wing area: 14.8 m²
Wing span: 10.1 m
Hang glider weight: 30 kg
Nose angle: 130°
Foil Racer
Wing area: 15.8 m²
Wing span: 10.5 m
Hang glider weight: 32 kg
Nose angle: 130°
A 1995 hang glider.
First appearing in 1991, the Enterprise Wings Aero is for Advanced pilots.
An easy double surface glider. Just a step up from a single surface glider. Mellow and predictable handling. They have all different features depending on their age.
Aero 145
Wing area: 13.47 m²
Wing span: 8.3 m
Aspect ratio: 5.1
Hang glider weight: 27 kg
Minimum pilot weight: 45 kg
Maximum pilot weight: 75 kg
Packed length: 5.2 m
Packed length short: 3.9 m
Number of battens: 19
Nose angle: 122°
Aero 165
Wing area: 15.3 m²
Wing span: 9 m
Aspect ratio: 5.3
Hang glider weight: 29 kg
Minimum pilot weight: 60 kg
Maximum pilot weight: 90 kg
Packed length: 5.6 m
Packed length short: 4.1 m
Number of battens: 19
Nose angle: 122°
A 1993 double surface glider. An excellent wing, very easy to fly, very good glide and fast. It loses pressure at the moment of the flare and is an excellent wing in any type of conditions.
Desire 141
Wing area: 13 m²
Wing span: 9.83 m
Aspect ratio: 7.2
Hang glider weight: 30 kg
Minimum pilot weight: 60 kg
Maximum pilot weight: 95 kg
Packed length: 5.5 m
Packed length short: 3.8 m
Number of battens: 29
Nose angle: 127°
Desire 151
Wing area: 14 sq.m
Wing span: 10.03 m
Aspect ratio: 7.2
Glider weight: 32 kgs
Minimum pilot weight: 70kgs
Maximum pilot weight: 110kgs
Packed length: 5.7m
Short pack length: 3.8m
Number of battens: 29
Nose angle 127 degrees
Circa 1995, the Rage is an intermediate glider with 70 percent double surface and uses 7075 battens. This glider can’t get fast enough to loop it but has respectable performance and is a dream to handle (thanks to the ball and socket wing tips). Handles well, never any bad surprises.
When Enterprise Wings was wound up in 1995 it appears the Enterprise Wings “Rage” plans were sold to Moyes and became the Moyes Max.
Wing area: 14.8 m²
Wing span: 9.9 m
Aspect ratio: 6.6
Hang glider weight: 30 kg
Minimum pilot weight: 70 kg
Maximum pilot weight: 110 kg
Packed length: 5.8 m
Packed length short: 3.9 m
Number of battens: 25
Nose angle: 125°
The 1987 Enterprise was a fourth generation intermediate which was aimed at the post P1 market. The airframe is simple and robust with a simple rigging system. The machine has exposed cross tubes and luff lines to aid dive recovery. The Enterprise was priced at £925.00 inc VAT.
A number of models were developed and produced based on the body style of the 280. After preliminary market and design studies, Enstrom initiated the development of a larger, turbine-powered helicopter in 1988.
Primarily developed from the four-seat Model 280L Hawk, the Eagle prototype, based on a converted 280FX airframe, flew for the first time in December 1988, powered by Allison 250-C20W turbine, followed by a definitive aircraft (N8631E) with a wider cabin on 7 October 1989. The 480 initial version has a five-seat (two plus three) configuration with staggered seating for forward visibility from all seats. Easily reconfigured to three seats for training or executive transport; or pilot’s seat only for transporting light cargo. Instrument panel centrally located above avionics console.
Announced in February 1990, the Eagle is powered by an Allison 250 turboshaft. The second 480/TH-28 (production prototype) flew in December 1991.
Initial FAA certification for the 480 was received on 7 June 1993; in December 1994, the approval was extended to FAR 27 standards.
A three-seat version, designated TH-28, was proposed by Enstrom for the US Army’s New Training Helicopter (NTH) programme. Specially configured as a training light patrol helicopter: unique features include three crashworthy seats, crashworthy fuel system, and a large instrument panel which will accommodate dual instrumentation for either VFR or IFR training. Seating configuration allows training of two students simultaneously.
The TH-28 was flown first in 1990. A production representative helicopter made its maiden flight on 21 December 1991. The TH-28 was granted FAA certification to C.A.R. Part 6 standards in September 1992.
Turbine-powered certification of the TH28 came in September 1992 and the 480, to FAR Pt27 standards, in December 1994.
Development of the more capable 480B variant powered by the Rolls Royce/ Allison 250-C20W turbine powerplant had begun in the spring of 1999, and FAA certification of the new model was obtained on 9 February 2001. In August 2003, the UK CAA also certified the Enstrom 480B turbine helicopter.
The 480B basically equipped (2003) cost US$639,500, and features a high-inertia, three-blade, fully articulated main rotor system with upgraded main rotor gearbox, unboosted flight controls and high skid gear as standard equipment. The rotor speed is 372 rpm nominal; 385 rpm maximum permissible, and an anti-nodal vibrating cantilever beam to damp vibration at low speeds. The 480B cabin layout can be quickly reconfigured to seat one, three or five persons. A baggage compartment is in the tailboom.
Optional equipment includes emergency pop-out floats, air conditioning and cargo hook rated for external loads up to 454kg. The 480B can also be fitted with police patrol equipment including special police radios, searchlight, siren/PA system, FLIR and data recording facility.
The prototype, N480EN was exhibited at NBAA Convention, New Orleans, October 2000.
Production began in 1994 with initial deliveries to Europe. By June 2002, 43 480, 10 480B and four TH-28 had been registered. Final TH-28 produced in 1993 and delivered to China in 1993. Nine 480B delivered by mid-2003. Certified and operating in 14 countries: Australia, Belgium, Brazil, Canada, China, France, Germany, Japan, South Africa, Sweden, Switzerland, Thailand, UK and USA. In addition, 480 are also operating in Burkina Faso and Russian Federation. Customers include the Indonesian Police which ordered 18 480B in 2003.
TH-28
Engine: 1 x Allison 250-C20W.
Instant pwr: 313 kW.
Rotor dia: 9.8 m.
MTOW: 1293 kg.
Useful load: 533 kg.
Max speed: 122 kts.
Max cruise: 114 kts.
Max range: 765 km.
HIGE: 14,000 ft.
HOGE: 12,000 ft.
Service ceiling: 13,000 ft.
Crew: 1.
Seats: 3.
480
Engine: 1 x Allison 250-C20W, 212kW.
Instant pwr: 313 kW.
Rotor dia: 9.8 m.
Length: 8.92m
Height: 2.79m
MTOW: 1293 kg.
Useful load: 533 kg.
Max speed: 122 kts.
Max cruise: 114 kts.
Max range: 765 km.
HIGE: 14,000 ft.
HOGE: 12,000 ft.
Service ceiling: 13,000 ft.
Crew: 1.
Pax: 3/4.
Seats: 5.
480B
Engine: 313kW Rolls-Royce 250-C20W turboshaft, derated to 227kW take-off / 207kW continuous
Fuel capacity: 340 litres
The Model 280 Shark is an improved F-28A, with revised nose contours of better aerodynamic shape. A conventional light helicopter with skid landing gear, tubular metal tail rotor protector, and a horizontal stabiliser with fins at tips. High inertia, three-blade fully articulated rotor head with blades attached by retention pin and drag link have control rods passing inside a tubular rotor shaft to a swashplate inside fuselage. No rotor brake is fitted. The non-folding blades have a MAC A 0013.5 section, and a two-blade teetering tail rotor is fitted. A thirty-groove belt drive runs from the horizontally mounted engine to the transmission.
The flying controls are conventional and manual, with a trim system that absorbs feedback from the rotor and repositions stick datum as required by pilot.
With bonded light alloy blades, the fuselage has a glass fibre and light alloy cabin section, steel tube centre-section frame, and stressed skin aluminium tailboom. The skids are carried on Enstrom oleo-pneumatic shock-absorbers. Air Cruiser inflatable floats are available optionally. Fuel is in two tanks, each of 79.5 litres. Total standard fuel capacity is 159 litres, of which 151 litres are usable. Auxiliary tank, capacity 49 litres, can be installed in the baggage compartment. Electrical power is provided by a 24V 70A engine-driven alternator, 12V 70A system optional. No hydraulic system is fitted.
Shoulder harnesses are equipped for three seats and night lighting is standard on the 280FX. Night lighting includes instrument lighting with dimmer control, position light on each horizontal stabiliser tip, anti-collision light and nose-mounted landing light. Optional equipment for both F28F and 280FX includes fixed float kit, wet or dry agricultural spray kit and cargo hook for utility missions. Wide instrument panel available for IFR training. Accomodating a pilot and two passengers, side by side on bench seat, the centre place is removable. Removable door on each side of cabin. Baggage space is aft of engine compartment, with an external door. Cabin heated and ventilated.
Developed in 1973 as a luxury version of the F-28A, FAA certification was achieved in September 1974. A collaboration between a Boston industrial design firm and the Enstrom engineering team yielded the new aerodynamically styled airframe. Immediately put into production, a number of models were developed and produced based on the body style of the 280 Shark (mechanically identical to the F-28C).
F-28C/280C: improved versions, introduced in 1975 replacing the F28A and 280, powered by the 153kW Avco Lycoming HIO-360-E1AD engine with a Rajay 301-E-10-2 turbocharger; the tail rotor was moved to the port side of the fuselage and the direction of rotation reversed. Certified by the FAA in 8 December 1975, production ceased in Novembr 1981.
In 1977 Enstrom Helicopters received FAA certification for an increase from 2,200 to 2,350 pounds gross weight for the turbo¬charged Model 280C. Fixed waste gate turbocharging on the Enstrom’s 205 hp Lycoming HIO 360 engine enables the F 28C and the 280C to lift their 2,350 pound gross weights at den-sity altitudes up to 13,000 feet. In addition to the turbo¬charging, Enstrom shifted the tail rotor from the right to the left side of the tail boom, thus placing the anti torque device where it reacts more favorably with the main rotor’s downwash and, therefore, is more effective. A tail rotor blade with a wider chord has been tested and is being retrofitted to all C models of the F 28 and the Shark 280. The FAA has approved the modification.
F-28F Falcon/280F: FAA certificated in January 1981, the F-28F and 280F were powered by the turbocharged 168kW Avco Lycoming. HIO-360-F1AD engine
280FX: updated version of the Model 280F fitted with faired landing gear, new seats, redesigned vertical and horizontal tail surfaces, covered tail rotor shaft and tail rotor guard powered by one 225 hp (168 kW) Lycoming HIO-360-F1AD. First flown in December 1983 and certificated in January 1985. Export customers include the Chilean army which bought 15
280L Hawk: work on a four-seat version of the 280C began in January 1978 and a prototype was first flown on 27 December 1978. The main rotor diameter was increased by 0.61m and the fuselage lengthened by 0.91m. Powerplant of the F-28F/280F was retained and fuel capacity increased to 170 litres. However, full development was postponed indefinitely in 1983 following a change in company ownership
Spitfire Mk 1: developed by the Spitfire Helicopter Company of Lynnfield, Massachusetts, from the basic Enstrom F-28A design, the Spitfire Mk 1 appeared in 1976, powered by a 313kW Allison 250-C20B turboshaft
The turbine-powered 280FX, a modified piston-powered model in which an Allison 250-C20 turbine engine with the Enstrom drive train and rotor system was integrated, flew first in December 1988. Turbine-powered certification of the TH28 came in September 1992 and the 480, to FAR Pt27 standards, in December 1994.
The Model 480 Eagle is a development of the 280L Hawk, with seating for five and power provided by the Allison 250-C20B turboshaft.
Although the Enstrom helicopters are intended mainly for light passenger operations, the F-28C and Model 280C can be used in the agricultural role with two side-mounted chemical hoppers and their associated spraybooms. Liquid chemical capacity is 340 litres, and powder chemical capacity 0.5cu.m.
A total of 735 of the earlier versions produced (14 F28, 315 F28A, 121 F28C, 56 F28C-2, 21 280, 206 280C and two 280L).
A total of 98 280FX built up to mid-2003, a further two 280 registered in early 2003. The Chilean Army operates 15 280FX for primary and instrument training. The Venezuelan National Guard took delivery of four 280FX for training in January 2002.
Basic 2004 price was US$320,000 for the F28F Falcon and 280FX Shark.
280 Shark
Engines: Lycoming HIO-360-C1A, 205 hp.
Seats: 3.
Disc loading: 2.67 lb/sq.ft.
Pwr loading: 10.48 lb/hp.
Max TO wt: 2150 lb.
Empty wt: 1450 lb.
Equipped useful load: 642 lb.
Payload max fuel: 402 lb.
Range max fuel/ cruise: 224 nm/2.1 hr.
Range max fuel / range: 245 nm/ 3.0 hr.
Service ceiling: 13,000 ft.
Max cruise: 102 kt.
Max range cruise: 83 kt.
ROC: 1000 fpm.
HIGE: 5600 ft.
HOGE: 3700 ft.
Max sling load: 500 lb.
Fuel cap: 240 lb.
F-280C Turbocharged
Engines: Lycoming HIO-360-E1AD, 205 hp.
Seats: 3.
Disc loading: 2.73 lb/sq.ft.
Pwr loading: 10.73 lb/hp.
Max TO wt: 2200 lb.
Empty wt: 1495 lb.
Equipped useful load: 647 lb.
Payload max fuel: 407 lb.
Range max fuel/ cruise: 193 nm/1.9 hr.
Range max fuel / range: 201 nm/ 2.7 hr.
Service ceiling: 18,000 ft.
Max cruise: 96 kt.
Max range cruise: 76 kt.
ROC: 1300 fpm.
HIGE: 13,800 ft.
HOGE: 8300 ft.
Max sling load: 500 lb.
Fuel cap: 240 lb.
280C Shark
Engine: Lycoming HIO-360-E1AD, 205 hp.
TBO: 1000 hrs.
Main rotor: 32 ft.
Seats: 3.
Length: 28.7 ft.
Height: 9.2 ft.
Max ramp weight: 2350 lbs.
Max takeoff weight: 2350 lbs.
Standard empty weight: 1592 lbs.
Max useful load: 758 lbs.
Max landing weight: 2350 lbs.
Max sling load: 1000 lbs.
Disc loading: 2.9 lbs/sq.ft.
Power loading: 11.5 lbs/hp.
Max usable fuel: 240 lbs.
Max rate of climb: 1200 fpm.
Service ceiling: 12,000 ft.
Hover in ground effect: 8800 ft.
Hover out of ground effect: 4100 ft.
Max speed: 102 kts.
Normal cruise @ 3000 ft: 92 kts.
Fuel flow @ normal cruise: 85 pph.
Endurance @ normal cruise: 2.7 hr.
280FX Shark
Engine: 1 x Textron Lycoming HIO-360-F1AD.
Instant pwr: 170 kW.
Rotor dia: 9.8 m.
MTOW: 1180 kg.
Useful load: 460 kg.
Max speed: 102 kts.
Max cruise: 102 kts.
Max range: 483 km.
HIGE: 13,200 ft.
HOGE: 8700 ft.
Service ceiling: 12,000 ft.
Crew: 1/2.
Pax: 1/2.
Seats: 3.
A conventional light helicopter with skid landing gear and tubular metal tail rotor protector; horizontal stabiliser with fins at tips. High inertia, three-blade fully articulated rotor head with blades attached by retention pin and drag link; control rods pass inside tubular rotor shaft to swashplate inside fuselage; no rotor brake: blade section MAC A 0013.5; blades do not fold; two-blade teetering tail rotor. Thirty-groove belt drive from horizontally mounted engine to transmission. Flying controls are conventional and manual. Trim system absorbs feedback from rotor and repositions stick datum as required by pilot.
The F-28A forward fuselage, consisting of the extensively glazed compartment for the pilot and two passengers seated side-by-side on a bench seat, is made of light alloy and glassfibre. The centre section of the fuselage, accommodating the engine, transmission and fuel tanks, as well as providing anchorage points for the steel-tube undercarriage skids, is more substantially built of steel tube. The rear fuselage, carrying small vertical tail surfaces and the two-blade teetering tail rotor of bonded light alloy construction, is a semi-monocoque structure basically conical in shape and built of aluminium.
Bonded light alloy blades. Fuselage has glass fibre and light alloy cabin section, steel tube centre-section frame, and stressed skin aluminium tailboom.
Skids carried on Enstrom oleo-pneumatic shock-absorbers. Air Cruiser inflatable floats available optionally.
One 168kW Textron Lycoming HTO-360-F1AD flat-four engine with Rotomaster 3BT5EE10J2 turbocharger. Two fuel tanks, each of 79.5 litres. Total standard fuel capacity 159 litres, of which 151 litres are usable. Auxiliary tank, capacity 49 litres, can be installed in the baggage compartment. Oil capacity 9.5 litres.
Pilot and two passengers, side by side on bench seat; centre place removable. Removable door on each side of cabin. Baggage space aft of engine compartment, with external door. Cabin heated and ventilated.
Electrical power provided by 24V 70A engine-driven alternator; 12V 70A system optional. No hydraulic system.
Shoulder harnesses for three seats. Night lighting is optional for F28F. Night lighting includes instrument lighting with dimmer control, position light on each horizontal stabiliser tip, anti-collision light and nose-mounted landing light. Optional equipment for both F28F and 280FX includes fixed float kit, wet or dry agricultural spray kit and cargo hook for utility missions. Wide instrument panel available for IFR training.
The two-seat prototype of the F-28 was flown first on 12 November 1960 with a two-bladed main rotor and an un-skinned tubular rear fuselage, followed by the first of two three-seat production prototypes on 26 May 1962. Initial FAA certification was achieved for the F-28 model in April 1965 and deliveries began in 1965. The production version appeared in the autumn of 1963. Powered by a 134kW Avco Lycoming O-360-A1A engine, it had a three-bladed main rotor and a light alloy and glassfibre cabin section with an all-metal semi-monocoque tail boom. Enstrom sold only nine F-28s before being purchased by the Purex Corporation in early 1968. An improved version of the F 28, powered by a 205 hp Lycoming H10 360 C1B and called the F 28A, was certificated in May 1968. Production of the three seat F-28A started in 1967 but only 35 were sold before Purex suspended all operations in February 1970.
The F 28A uses a normally aspirated 205 hp engine. The main rotor blades are of bonded construction and have no time limit, mainly be¬cause the F 28 rotor system originally was designed to be rigid in plane, so the blades are heavier and experience lower working stress levels than if the F 28 had been de¬signed initially to employ its present fully articulated three blade system.
The F 28A offers a cruise speed of 87 knots. Enstrom offers an option, called a throttle correlator, that is designed to facilitate throttle/collective coordination. It employs a cam like arrangement that partially couples the collective and throttle, but even the folks at Enstrom did not recommend it with much enthusiasm.
The rugged rotor system of the Enstrom gives the F 28A a heavier cyclic, or attitude, control feel than is found on other light helicopters, such as the Hughes 300. By fixed wing standards, however, the control pressures are low. The somewhat heavier cyclic control force characteristics combine with a fairly large, six inch offset in the flapping hinge to give the F 28A a nice harmony between stability and control over an allowable CG range of six inches. When the helicopter is disturbed either by a gust or a sudden cyclic control input, the F 28A experiences an initial divergence in roll or pitch but not the wild type of response that is frequently imagined to exist with helicopters. An electric pitch and roll trim, which is operated by a thumb switch on the cyclic stick, allows a pilot to remove residual control forces and establish a hands ¬off trim condition in cruising flight.
Because of its heavier rotor blades (at 51 pounds each, they are nearly twice the weight of those on the Hughes 300C), the F 28A does not gain lost rotor rpm as quickly as does a helicopter with a lighter rotor system. The higher inertia of the Enstrom rotors, however, does enable the F 28A to hold its rpm longer, at times when the pilot may need to use the rotational energy stored in the whirling rotor system.
In 1976 the improved F-28C was produced. The basic F28A and 280 were replaced by turbocharged F28C and 280C, certified by FAA 8 December 1975.A turbocharged conversion by Enstrom maintains full rated power up to 12,000 ft. Fixed waste gate Rajay 301-E-10-2 turbocharging on the Enstrom’s 153kW / 205 hp Lycoming HIO 360-E1AD engine enables the F 28C and the 280C to lift their 2,400 pound gross weights at density altitudes up to 13,000 feet. In addition to the turbocharging, Enstrom shifted the tail rotor from the right to the left side of the tail boom, thus placing the anti torque device where it reacts more favorably with the main rotor’s downwash and, therefore, is more effective. A tail rotor blade with a wider chord has been tested and is being retrofitted to all C models of the F 28 and the Shark 280. The FAA has approved the modification.
The F-28C-2 introduced a one-piece windscreen and a pedestal central instrument console for improved forward and downward vision. The 500th helicopter was delivered during June 1977. Production ceased in Novembr 1981, succeeded by the F28F.
Although the Enstrom helicopters are intended mainly for light passenger operations, the F-28C and Model 280C can be used in the agricultural role with two side-mounted chemical hoppers and their associated spraybooms. Liquid chemical capacity is 340 litres, and powder chemical capacity 0.5cu.m.
F-28F Falcon/280F was FAA certificated in January 1981, powered by the turbocharged 168kW Avco Lycoming HIO-360-F1AD engine. The basic F28F Falcon model was certified to FAR Pt 6 on 31 December 1980. The two major changes were incorporated into the F28F and 280F/280FX over the earlier F28C/280C series were an increase in power from 153kW to 168kW / 225shp and the addition of a throttle correlator to reduce pilot workload. Changes to the F28F and 280FX are the redesigned main gearbox with a heavy wall main rotor shaft (standard equipment on all new aircraft and retrofittable to all existing F models); optional lightweight exhaust silencer, which reduces noise in the hover by 40% and gives a 30% reduction when flying at 152m (can also be retrofitted to F28F, 280F and 280FX); and a lightweight starter motor.
A dedicated police version of Model 280F, the F-28F-P Sentinel, was developed for the Pasadena Police Department, and fitted with special equipment including a searchlight. First delivery was in October 1986.
The development of a turbine-powered model was initiated in 1988, culminating in certification of the TH28 in September 1992.
The T-28 experimental version featured a 240 shp AiResearch TSE 36-1 turboshaft engine, increased fuel, larger diameter tail rotor, and a new transmission system.
Customers total 735 of earlier versions (14 F28, 315 F28A, 121 F28C, 56 F28C-2, 21 280, 206 280C and two 280L). Last of 135 F28F delivered 1999 to Fresno Police Department, California, but further nine produced in 2002 and 2003. Total of 98 280FX built up to mid-2003, increasing Enstrom piston-engined helicopter production to 966; further two 280 registered in early 2003, Peruvian Army has 10 F28F for flight training; Colombian Air Force operates 12 F28F for primary and instrument training, Numerous US police departments operate F28F-P for patrol and surveillance missions.
The basic 2004 price was US$320,000 for F28F Falcon and 280FX Shark.
F-28
F-28A
Engine: Lycoming HIO-360-C1A, 205 hp.
Main rotor dia: 32 ft / 9.75 m
Disc loading: 2.67 lb/sq.ft.
Pwr loading: 10.48 lb/hp.
Length: 29 ft 6 in / 8.99 m
Cabin max width: 5 ft 1 in / 1.55 m
Empty wt: 1450 lb / 657 kg
Max wt: 2150 lb / 975 kg
Equipped useful load: 642 lb.
Payload max fuel: 402 lb.
Max sling load: 500 lb.
Range max fuel/ cruise: 204 nm/2.1 hr.
Range max fuel / range: 240 nm/ 237 mi / 381 km / 3.3 hr.
Luggage cap: 7 cu.ft or 60 lbs.
Vne: 98 kts.
Cruise: 87 kt / 100 mph / 161 kph
Max cruise: 93 kt.
Max range cruise: 74 kt.
Service ceiling: 12,000 ft / 3660 m
Hover IGE: 5600 ft.
ROC: 950 fpm / 290 m/min
Best climb/glide speed: 58 kts.
Fuel cap: 240 lb / 30 USG.
Endurance: 2.5 hr.
Baggage hold: 8 cu ft / 0.33 cu m
Seats: 3.
F-28B
Engine: Lycoming TIO-360, 275 hp
Enstrom F-28C
Engine: 1 x Avco Lycoming HIO-360-E1BD, 153kW
Main rotor diameter: 9.75m
Length: 8.94m
Height: 2.79m
Max take-off weight: 1066kg
Empty weight: 680kg
Max speed: 180km/h
Cruising speed: 172km/h
Ceiling: 3660m
Range: 435km
Crew: 1
Passengers: 1
F-28C-2 Falcon
Engine: Lycoming HIO-360-E1AD, 205 hp.
TBO: 1000 hrs.
Main rotor: 32 ft.
Seats: 3.
Length: 28.2 ft.
Height: 9.2 ft.
Max ramp weight: 2350 lbs.
Max takeoff weight: 2350 lbs.
Max wt (100mph restriction): 2500 lbs.
Max wt (90mph restriction): 2600 lbs.
Standard empty weight: 1562 lbs.
Max useful load: 788 lbs.
Max landing weight: 2350 lbs.
Max sling load: 800 lbs.
Disc loading: 2.9 lbs/sq.ft.
Power loading: 11.5 lbs/hp.
Max usable fuel: 240 lbs.
Max rate of climb: 1200 fpm.
Service ceiling: 12,000 ft.
Hover in ground effect: 9700 ft.
Hover out of ground effect: 6000 ft.
Max speed: 97 kts.
Normal cruise @ 3000 ft: 90 kts.
Fuel flow @ normal cruise: 78 pph.
Endurance @ normal cruise: 2.9 hr.
Max range cruise: 74 kt
Range max fuel / range: 196 nm/ 2.7 hr
Range max fuel/ cruise: 178 nm/1.9 hr
F-28F
Engine: Lycoming HIO-360-F1AD, 225 hp.
TBO: 1000 hrs.
Main rotor: 32 ft.
Seats: 3.
Length: 28.2 ft.
Height: 9.2 ft.
Max ramp weight: 2600 lbs.
Max takeoff weight: 2600 lbs.
Standard empty weight: 1562 lbs.
Max useful load: 1038 lbs.
Max landing weight: 2600 lbs.
Max sling load: 1000 lbs.
Disc loading: 3.2 lbs/sq.ft.
Power loading: 11.6 lbs/hp.
Max usable fuel: 240 lbs.
Max rate of climb: 1450 fpm.
Service ceiling: 18,000 ft.
Hover in ground effect: 12,400 ft.
Hover out of ground effect: 7500 ft.
Max speed: 97 kts.
Normal cruise @ 3000 ft: 94 kts.
Fuel flow @ normal cruise: 96 pph.
Endurance @ normal cruise: 2.4 hr.
T-28
Engine: AiResearch TSE 36-1 turboshaft, 240 shp
