Bygate Tiger Hawk           

Of all-wood construction and covered with ceconite, the Tiger Hawk is finished with an Imron 700 paint system. All the de­sign, fabricate and construction was carried out by Tim Bygate. This is no mean feat when you have to design each component before con­structing it. The airframe contains a number of different timbers. Spruce was used for the spars, wing ribs, etc along with some Douglas Fir. The plywood covering found on the wings, turtle deck and seat was Birch and Hoop Pine. Tim found one of the trickier pieces to build was the Perspex canopy.

The Tiger Hawk was powered by an EA81 Subaru with a 2: 1 belt drive reduc­tion system made by Cannings Engineering in Christchurch, New Zealand. The engine was stripped by Tim and measured for wear and tear and when reassembled it produced approx. 80 hp at 5400 rpm.

All construction was carried out in a small shed at the Hanmer Springs Forestry Camp in New Zealand by Tim Bygate, the designer. This shed kept expanding as the aircraft grew until finally on the completion the whole front of the shed had to be removed to en­able the plane to be removed for its first flight on September 7, 2001.

BX Aviation Cherry BX-2

Designed by Max Braendli, the BX-2 Cherry two-seat monoplane (first flown 1982) has detachable wings and elevator.

Modified BX-2 TD

Thirty examples had been finished by 1998. The foldable wings allow it to be derigged for towing in 10 minutes.

Engine: Continental, Rotax
Wing span: 7 m
Wing area: 8.5 sq.m
MAUW: 550 kg
Empty weight: 325 kg
Fuel capacity: 78 lt
Max speed: 265 kph
Cruise speed: 200 kph
Minimum speed: 80 kph
Climb rate: 3 m/s
Seats: 2
Fuel consumption: 14 lt/hr
Plan price (1998): 880 FrS

Engine: Continental A-65, 65 hp.
HP range: 65-90.
Propeller: Brändli 1.60 m diameter
Wing span: 23 ft / 7 m
Wing area: 90 sq.ft. / 8.50 sq.m
Airfoil: NACA 747 A 415
C.G. range: 19% – 32% (MAC=1240mm)
Height: 6.6 ft / 2.02m
Length: 17.5 ft / 5.23m
Weight empty: 700 lb / 320 kg
Gross: 1222 lb / 550 kg
Fuel cap: 23 USG / 80 lt
G load limit: +3.8 / -1.9
Range: 600 sm.
Vno (max. struct. cruise): 219 km/h
Vfe (max. flaps): 142 km/h
Vne (never exceed): 275 km/h
Va (max. maneuvering): 170 km/h
Vh (horizontal): 200 km/h
Vs (stall, clean): 96 km/h
Vs0 (stall, flaps): 85 km/h
Vy (best rate of climb): 145 km/h
ROC: 680 fpm / 3m/s
Enduranace: 5:00 hr
Take-off dist: 1000 ft / 300 m
T/O 15m: 560 m
Landing dist: 500 ft.
Service ceiling: 14,000 ft.
Seats: 2.
Landing gear: retractable nose wheel.
Flaps: yes
Silencer: Brändli
Noise Chapt. 6: 62.3 dB

Buxton Transporter

In 1935 Jay Buxton of Hawthorne, California, completed his Transporter powered glider. The engine is a 2 stroke inline, inverted type of unique design. It is a three cylinder, three port engine that weighs 115 lb and develops 35 hp at 2100 rpm.

The motor cabane is completely removed and replaced by a plain cabane when used for gliding.

Wingspan: 52.3 ft
Wing area: 240/255 sq.ft
Aspect ratio: 11.4
Length: 26.6 ft
Empty weight: 435 lb
Gross weight: 725/965 lb
Fuel capacity: 12 USG
Min sink: 2.5 f/sec
Glide ratio: 20-1
Seats: 2

Büttner Crazy Plane

Paramotor circa 1998. Available with electric start.

Crazy Plane 4
Engine: Solo, 20 hp
Reduction ratio: 3.25-1
Prop diameter: 125 cm
Fuel capacity: 5 / 10 lt
Empty weight: 26.5 kg
Certification: vz
Price (1998): DM 9400

Crazy Plane 4
Engine: Solo, 20 hp
Reduction ratio: 3.25-1
Prop diameter: 125 cm
Fuel capacity: 5 / 10 lt
Empty weight: 27.5 kg
Certification: vz
Price (1998): DM 9800

Crazy Plane 5
Engine: F33, 25 hp
Reduction ratio: 2.6-1
Prop diameter: 125 cm
Fuel capacity: 5 / 10 lt
Empty weight: 29.5 kg
Certification: wz
Price (1998): DM 11,250

Crazy Plane Duo
Engine: F33, 30 hp
Reduction ratio: 2.85-1
Prop diameter: 126 cm
Fuel capacity: 10 lt
Empty weight: 29.8 kg
Certification: wz
Price (1998): DM 11,650

Butterworth Westland Whirlwind  

The Butterworth Westland Whirlwind was a 2/3 scale flying replica of the British Westland Whirlwind fighter aircraft of World War II that was built in the United States in the 1970s.

The aircraft was based on the wings and horizontal tail of a Grumman American AA-1A modified and mated to an all-new fuselage. Power was provided by two Volkswagen air-cooled horizontally opposed four-cylinder engines with the result bearing only a passing resemblance to the real Whirlwind.

First flying in July 1977, Butterworth marketed plans in the late 1970s and early ’80s, with at least 15 sets selling and at least three aircraft reportedly under construction by 1985.

Butterworth Westland Whirlwind
Engines: 2 × Volkswagen, 65 hp (49 kW) each
Wingspan: 28 ft 0 in (8.53 m)
Length: 19 ft 6 in (5.94 m)
Height: 7 ft 1 in (2.16 m)
Empty weight: 1,042 lb (472 kg)
Gross weight: 1,400 lb (635 kg)
Maximum speed: 145 mph (233 km/h, 126 kn)
Range: 700 mi (1,126 km, 610 nmi)
Service ceiling: 8,000 ft (2,440 m)
Crew: One pilot