One of his early fighter aircraft was the Ca.18 reconnaissance aircraft which was developed to the Ca.20, the latter incorporating a larger engine mounted under a stream-lined cowling, with shorter wings and fitted with a machine-gun for offensive operations. The Ca.20 developed in 1914 was described as an exceptional fighter and ahead of its time. It was a single-seat fighting scout of mid-wing monoplane configuration and had a fixed forward firing machine-gun above the propeller arc. Only one example was produced and for many years it was stored in Italy before being acquired by the Museum of Flight in Seattle in 1999, preserved and placed on display but keeping its original fabric covering.
The thirteenth airplane model designed and built by aviation pioneer Gianni Caproni in Vizzola Ticino. It was a two-seat, rather conventional tractor wing-warper monoplane, generally of Blériot lines, which flew for the first time in June 1912. Two examples were built, powered by 70 hp Anzani radials, which proved problematic. The “Milano I” was the second, donated by Caproni to the Società Italiana Aviazione in July 1912.
The Caproni Ca. 9, from 1911, has a structure entirely in wood, with a latticework fuselage braced with steel cables, wooden wings and tailpieces with canvas covering. The engine is a 35 hp three-cylinder Anzani Y. The landing gear features the typical anti-tip skids, characteristic of many aircraft of the pioneering period.
To commemorate the hundredth anniversary of the birth of the Trentino pioneer in 1986, the prestigious National Air and Space Museum in Washington exhibited Ca. 9 of the Caproni Museum in the “Early Flight” pavilion, models, drawings, relics, medals won by Caproni devices and a series of illustrative panels.
Having returned to Italy in 1988 and temporarily hosted by the AerSud, in 1989 the Ca.9 was exhibited in the Palazzo della Regione on the occasion of the official announcement of the project to build the new Caproni Museum in Trento. It then became a symbol of the initiative, and was again exhibited on the occasion of the laying of the first stone. Subjected to conservative interventions in America and Italy, with the inauguration of the Museum, it found its permanent home in the pioneering aircraft sector of the Gianni Caproni Museum of Aeronautics.
Engine: 35hp Anzani Wingspan 8.88 m Length 7.80 m Height 3.00 m Empty weight 220 kg Maximum speed 90 km / h
The success reported by Louis Blériot with his monoplane at the end of July 1909 in crossing the English Channel impressed a vigorous change in the tendencies of the builders of the time towards the monoplane, justified by the greater structural simplicity and better aerodynamics compared to contemporary biplanes.
Gianni Caproni joined this new trend starting from 1911 and up to the end of 1913, dealing exclusively with the construction of monoplane for school and training, in both single and two-seater versions, making more than seventy.
The first of these, the Ca. 8 single-seater, also known as the “Caproni monoplano 25hp”, flew to Vizzola on June 13, 1911 powered by a 25 hp three-cylinder fan-shaped Anzani engine.
The Ca.6 was a single-engine propeller-driven biplane with a traditional configuration with wings in the bow and tail fletching, but it had no fuselage: it was replaced by a light structure formed by two beams of unshelled wood and some vertical reinforcing uprights that supported the planes of tail. They were composed only of a stabilizer – horizontal balancer; the lack of a vertical drift was compensated by four large interwoven surfaces that, placed between the wings, contributed to the stability of the aircraft around the vertical axis. The wings resumed the double curvature profile that had also characterized Caproni aircraft immediately preceding, but with not very lucky results: the aerodynamic characteristics of this type of profile, which had been suggested to Caproni by his friend and colleague Henri Coandă, proved to be once again unsatisfactory.
The one built first flew in 1911, The Ca.6, the sixth Caproni biplane, sported the characteristic double curvature airfoil and lightened tailboom, constructed from hollowed-out wooden tubes. Still powered by the 50 hp Rebus, it was modified following some flights in spring 1911.
The Caproni Ca.6 was preserved inside the Caproni workshops until 1934, when it was brought to Milan to be shown to the public on the occasion of the Italian Air Force Exhibition; in the meantime, in 1927, the spouses Gianni and Timina Caproni founded the Caproni Museum, in whose headquarters in Taliedo the Ca.6 found a place starting from the forties. After the vicissitudes linked to the Second World War and the reopening of the museum in Vizzola Ticino, the Ca.6 was again displayed to the public. The definitive position in the Museo dell’Aeronautica Gianni Caproni, reopened in Trento, in the nineties.
The aircraft underwent a first renovation-conservation operation before being displayed in Milan, in the early thirties: it was probably on this occasion that the leading edge of the wings was reinforced with a metal strip and the fuselage and the wings themselves they were shortened. At the time of its transfer to Trento, the Ca.6 has undergone a new intervention; however, due to the lack of availability of reliable technical drawings and other necessary historical documentation, a real restoration did not take place, but only a conservation procedure.
Powerplant: 1 × Rebus 50hp 4-cyl, 37 kW (50 hp) Propeller: 2-bladed fixed pitch propeller Wingspan: 12 m (39 ft 4 in) Wing area: 45 m2 (480 sq ft) Length: 9.8 m (32 ft 2 in) Height: 3.27 m (10 ft 9 in) Gross weight: 318 kg (700 lb)
The Ca 5 series of First World War bombers were a progressive development of the earlier Ca 3 series and, like them, were biplanes. They were slightly larger overall, heavier, and somewhat faster, though their bomb load of 540 kg (1190 lb) remained modest. The initial version (Ca 44) was powered by three 200 hp Fiat engines, driving (as in the Ca 3) one pusher and two tractor propellers. Defensive armament was a single machine gun in the nose and a second to the rear. Entering service with the Corpo Aeronautica Militare in early 1918, the initial model was followed by generally similar versions (Ca 45 and Ca 46) having Fiat, Isotta Fraschini or Liberty engines. The Ca 5 continued to serve until the end of the First World War, though in dimin¬ishing numbers and for the most part on night operations, with many of the Gruppi that had operated the earlier Ca 3. A specialized night bomber variant was later given the post-war designation Ca 50.
Italian production of the Ca 5 series reached 255, to which can be added a small number built in France by Esnault Pelterie.
Two (Ca 46) bombers were delivered to the United States, where it was planned to build the type in quantity for the US Army Air Service, but only three had been completed (two by Standard Aircraft Corporation, AS40070 and 40071, and one by Fisher Body Works, AS42119) before the Armistice.
Ca.46
The American Liberty engine, however, found its way into one other variant: a torpedo and bomber seaplane (Ca 47), with twin Zari floats, of which Piaggio in Italy delivered 10 after the Armistice.
Ca 5 Engines: 300 hp Fiat A.12. Span: 23.40 m (76 ft 9.25 in) Length: 12.62 m (41 ft 4.75 in) Gross weight: 5300 kg (11685 lb) Maximum speed: 152 km/h (94.5 mph)
Ca.5 Engines: 3 x 250hp Fiat A.12 Wingspan: 22.76 m / 75 ft 8 in Length: 10.80 m / 35 ft 5 in Height: 3.80 m / 12 ft 6 in Max Take-off weight: 3870 kg / 8532 lb Empty weight: 2450 kg / 5401 lb Max. speed: 146 km/h / 91 mph Cruise speed: 121 km/h / 75 mph Ceiling: 4000 m / 13100 ft Rate of climb: 114 m/min / 350 ft/min Range: 650 km / 404 miles Armament: 4 x 6.5mm mg Bomb load: 800kg Crew: 4
Ca 46 Engines: 300 hp Fiat A.12. Span: 23.40 m (76 ft 9.25 in) Length: 12.62 m (41 ft 4.75 in) Gross weight: 5300 kg (11685 lb) Maximum speed: 152 km/h (94.5 mph)
Standard-Caproni Ca.46 Engines: three 350hp Liberty 12 Wingspan: 76’9″ Length: 41’2″ Useful load: 4650 lb Max speed: 103 mph Cruise: 94 mph Range: c.400 mi Ceiling: 14,760′ Seats: 3
In parallel with the Ca 3 biplane bomber, Caproni also evolved a comparatively small series of bomber triplanes, collectively designated Ca 4. Larger than the Ca 3, the first three Ca 4s (Ca 40) appeared in late 1917 and were powered by three 200 hp Isotta Fraschinis engines. One engine was mounted to drive a pusher propeller at the rear of the central crew nacelle, and the other two were tractor-mounted in front of the middle wing leading edge in the noses of the twin booms. The crew was increased to five, by virtue of having two separate rear gunner positions (one in each fuselage boom) instead of the single, central cage position on the Ca 3. The prototype and the first three production Ca.4s had angular crew nacelles, but all later examples of the Ca.1000HP (its initial designation arising from the total horsepower provided by the prototype’s engines) had carefully contoured rounded nacelles. A third gunner’s cockpit was located at the front of the nacelle forward of the side-by-side cockpits for the pilot and co-pilot. The first Ca 4s were underpowered, and the 12 which followed (Ca 41) were uprated to three 270 hp IF engines, having also an oval section central nacelle with tandem seating for the two pilots.
Ca.41
The principal (Ca 42) versions reverted to side by side pilot seating and were also fitted with uprated 223.6kW Fiat A.12s, 223.6kW Isotta Fraschini V.5s or 298kW Liberty engines. Even with the extra power, they were regarded as too slow for daylight operations, and were employed chiefly as night bombers, carrying up to 1450 kg (3197 lb) in a coffin shaped container between the main units of the landing gear. The Ca. 42 could carry a 1450-kg (3200-lb) bomb load over a long range, but the type was difficult to fly, and being slow, was vulnerable to fighter attack despite an arsenal of defensive weapons, including machine-guns and a cannon on some examples. Twenty-three were built, mostly for the Italian Navy, who used them on night bombing raids and in daylight against the Austrians during the final assault at Vittorio Veneto. Six Liberty-powered Ca.42s were supplied to the British Royal Naval Air Service, though they apparently never left Italy.
Variants of the triplane Ca 4 series included a twin engined, twin float torpedo bomber prototype (Ca 43), and two (Ca 51 and Ca 52) which featured a biplane tail unit, incorporating a rearward firing gun position.
The British Government requested the Italian authorities a few copies of the Ca 42 in order to evaluate it. Caproni built 6 airplane designated Ca.52, differing from the Italian model by Lewis guns paired in the front seat of the fuselage and space for British bomb sizes. They received the RNAS serials N526 to N531 and were used briefly by No. 6 Squadron in Otranto (Italy) and then returned to Italy.
Total production of all versions of the Ca.4 was 42. One Ca.4 was converted to a seaplane by the substitution of huge twin floats for the land undercarriage. Post-war, the Ca.48 23-passenger conversion made a notable flight from Milan to London in 1919. Another civil conversion for 30 passengers was tested the following year under the designation Ca.58.
Ca.4 Engines: 3 x Isotta-Fraschini, 190kW Max. speed: 126 km/h / 78 mph Ceiling: 3000 m / 9850 ft Crew: 4 Armament: 4 x 6.5mm machine-guns, 1450kg of bombs
Ca.40 Engines: 3 x Fiat or Isotta-Fraschini, 200 hp. Gross weight: 6440-kg (14,200-lb). Maximum speed: 125 kph (78 mph).
Ca.41 Wing span: 130 ft.
Ca.42 Engines: 3 x Liberty, Fiat, or Isotta-Fraschini, 270-hp Span: 29.90 m (98 ft 1.25 in) Length: 15.10 m (49 ft 6.5 in) Gross weight: 7500 kg (16535 1b) Maxi¬mum speed: 140 km/h (87 mph) Ceiling: 9840 ft Range: 7 he Crew: 5 Armament: 4 x mg Bombload: 3910 lb
Ca.3 (or Ca.33) of 1917 was the alternative designation of the Ca.450HP, 299 of which were built between 1917 and 1919. Powered by three 112kW Isotta Fraschini V.4B engines, the normal bomb load was 200kg and defensive 7.7mm machine-guns were mounted over the nose cockpit and in a tubular metal structure just behind and slightly higher than the trailing edge of the upper wing centre section.
Three main versions were built, consisting 166 Ca.31’s with 80-100 hp Gnome engines, eight Ca.32’s with 100 hp Fiat engines, and the Ca.33.
A three-bay biplane of conventional wooden construction, wooden fuselage, the entire airframe was fabric covered. The tail has a fixed central tail-fin and twin outboard rudders. Ailerons are on all four wings. Each main undercarriage unit has two pairs of wheels. In addition, a pair of nose-wheels are fitted.
The Ca 3 (Ca 33) became the major production version, 270 being built. It was characterized by three bay equal span wings, and three rudders mounted above the tailplane.
In Italian service the Ca 3 was operated by the IV, IX, Xl, XIV and XVIII Gruppi Bombardamenti, and one Italian navy squadron in Albania.
The wounded gunner is lifted from the nacelle of his aircraft.
Licence production of a further 86 was undertaken in France by the Esnault Pelterie and SAIB factories, these serving with the escadrilles of the French Aviation Militaire. In addition, wartime and postwar Italian production figures reached 153 examples of the Ca 3 Mod (Ca 36), of which the CAM received 144. These had detachable outer wing panels, and some were converted as ambulance transports (Ca 36 S), carrying four stretchers and up four sitting casualties.
In 1925 eight machines were sent to Libya in support of the reconquest of that territory. By the end of 1926, however, the last examples had been withdrawn from first-line service.
Ca.33
The mainstream Ca 3 bombers carried a crew of four (two pilots, an observer/front gunner and a rear gunner), with a ring-mounted Revelli machine gun in the front and rear positions. The rear gunner was installed in an exposed, cage like structure below and aft of the upper wing trailing edge, directly ahead of the rear propeller. Most Ca 3s were used for conventional bombing attacks, but some were also employed briefly as torpedo bombers. Experimental variants included models with modified landing gear (Ca 34), tandem pilot seats (Ca 35), shorter span wings (Ca 37) and a proposed single float seaplane version (Ca 39). A number of Ca 3 Mods were adapted as mail or six passenger civil transports (Ca 56a) after the war.
Ca.3 Engines: 3 x Isotta-Fraschini V.4B, 112kW Max Take-off weight: 3312 kg / 7302 lb Empty weight: 2300 kg / 5071 lb Wingspan: 22.2 m / 72 ft 10 in Length: 10.9 m / 35 ft 9 in Height: 3.7 m / 12 ft 2 in Max. speed: 140 km/h / 87 mph Ceiling: 4100 m / 13450 ft Range: 450 km / 280 miles Crew: 4 Armament: 2-4 x 7.7mm machine-guns, 450kg of bombs
Ca,33 Engine: 3 x Isotta-Fraschini V4B, 150 hp Propellor: 2 x 2-blade tractor, 1 x 2-blade pusher Wingspan: 72 ft 10 in Length: 35 ft 9 in Height: 12 ft 2 in Empty weight: 5080 lb MTOW: 8400 lb Max speed: 85 mph at SL Service ceiling: 13,400 ft Endurance: 3 gr 30 min Armament: 2-4 machine gun Bombload: 1000 lb