Dewoitine D.8    

In the autumn of 1922, Dewoitine submitted to the CEDANA (Commission d’Examen des Appareils Nouveaux pour l’Aeronautique) a high-altitude version of the D 1 (which had then still to fly) designated D 8. One category of fighter in the 1921 C1 programme called for a speed of 240km/h at 7000m and a practical ceiling of at least 8500m. After discarding the proposal to equip the D 8 with a Rateau turbo-compressor, Dewoitine adopted the higher compression Hispano-Suiza 8Fe engine of 360hp. A larger wing of wood rather than metal construction was introduced and the prototype was rolled out in the late summer of 1923.
At Francazal, the D 8 attained an altitude of 2000m in 4.25 min, 3000m in 6.83 min, 4000m in 10.5 min and 5000m in 15.1 min. For publicity purposes this performance was attributed to the D 1 fighter. The C1 requirement for a high-altitude fighter having been abandoned, and, in June 1924, the D 8 was modified for an attempt on the world air speed record, fitted with a lightened version of the D 1 wing. On 23 December 1924, the D 8 established 100-, 200- and 500-km closed-circuit records while being flown by Marcel Doret, and, on 12 December, set a 1000km closed-circuit record of 221,775km/h.

Max take-off weight: 1100 kg / 2425 lb
Empty weight: 780 kg / 1720 lb
Wingspan: 12.80 m / 41 ft 12 in
Length: 7.50 m / 24 ft 7 in
Height: 2.75 m / 9 ft 0 in
Wing area: 25.00 sq.m / 269.10 sq ft
Max. speed: 245 km/h / 152 mph

Dewoitine D 1 / Ansaldo AC 2

C.1bis

Designed by Emile Dewoitine to compete in the French C1 single ¬seat fighter competition of 1921, the prototype D 1 flew for the first time on November 18 1922.
A high-wing monoplane with fabric-covered metal wings and an oval-section metal fuselage covered by duralumin sheet. Armament was two 7.7mm synchronised Vickers guns and power was provided by a 300hp Hispano-Suiza 8Fb (HS 42) eight-cylinder water-cooled engine.
The principal criticism being the poor forward visibility. A 120mm pylon was therefore inserted between wing and fuselage, the fighter, now referred to as the D.1bis, becoming a parasol monoplane. This modification was completed in August 1923, by which time the first three (of 10) pre-series aircraft had been supplied for official evaluation in the initial configuration. Two of these were lost in accidents and the third was modified to D.1bis parasol form.
After prolonged evaluation of all the 1921 contenders, the Dewoitine D 1 and Spad 80 each received a contract in 1924 for 80 aircraft, the two types being intended to replace Spad XIIIs and XXs in Aviation Militaire squadrons. A further 29 D 1 s were ordered subsequently f or the Aeronavale.
Dewoitine’s chief test pilot, Marcel Doret, set speed records (with and without payload) of 233.10 km/h (144.84 mph) on December 23, 1924, and the D 1 could climb to 5000 m (16404 ft) in 15.1 minutes.

Union des Pilotes Civils festival, Orly, Paris 18 May 1930
Dewoitine D1ter No.3 F-AHAZ of Marcel Doret

The next five pre-series. aircraft (the fourth, fifth and sixth having been ordered by Czechoslovakia, Japan and Italy respectively, and the seventh and eighth by Switzerland) were all completed to D 1bis standard, but continuing criticism of forward view led to replacement of the shallow pylon between wing and fuselage by a cabane of inverted-vee struts on the prototype which thus became the D 1ter. The two pre-series aircraft for Switzerland were modified to this standard prior to delivery, the two lost during official trials) were completed as D 1ter fighters, the cabane struts being standardised for production D 1s. A contract had been placed in November 1923 on behalf of the Aeronautique Navale for 44 D 1s, with the government providing guarantees for 150 aircraft.
The production contract was placed with the SECM (Societe d’Emboutissage et de Constructions Mecaniques) which flew its first series D 1 on 18 January 1925. The production aircraft required several successive structural reinforcements, and did not gain acceptance by the Aviation Militaire until 1929. The D 1 was of mixed construction, with an open cockpit and two 7.5 mm (0.295 in) machine guns in the engine upper decking. The final version, the D 1 ter, had a more conventional strut type centre section cabane.

Dewoitine D1C1 300hp Hispano

Most Aviation Militaire D ls were soon transferred to the Aeronavale units, including 3C2, 4C1, 7C1 and 7C3; by mid 1931 these units had re equipped with the Nieuport-¬Delage 62. The Aeronautique Navale took delivery of its D 1s from early 1925, and in the previous year an order for 20 had been placed on behalf of the Forces Aeriennes Terrestres, although these were never to equip a service unit.
Dewoitine D ls were exported to Japan (one), Switzerland (two) and Yugo¬slavia (79), and a further 126 were built (with modifications) by Ansaldo at Turin for the Regia Aeronautica, with the designation AC 2.

Engine: 300hp Hispano-Suiza 8Fb (HS 42)
Max take-off weight: 1240 kg / 2734 lb
Empty weight: 820 kg / 1808 lb
Wingspan: 11.50 m / 37 ft 8.75 in
Length: 7.50 m / 24 ft 7 in
Height: 2.75 m / 9 ft 0 in
Wing area: 20.00 sq.m / 215.28 sq ft
Max. speed: 247 km/h / 153 mph
Range: 400 km / 249 miles
Armament: two 7.7 mm (0.30 in) Vickers machine gun

Dewoitine

Societe Aeronautique Dewoitine

Founded at Toulouse in 1922 by Emile Dewoitine to build all-metal aircraft. His first fighter, the D.1, appeared that year and his ultralight D.7 of 1923 was demonstrated in the USA. Designed and built a number of fighters, of which the D.21 of 1927 was built in Switzerland and France, and in 1929 in the Argentine. As no French orders were forthcoming, Dewoitine went to Switzerland in 1927 and formed the Societe Aeronautique Dewoitine. Returned to France 1930, establishing a manufacturing agreement with Liore et Olivier, which was entrusted with the redesign of his D.531 to become the D.37 for the Armee de I’Air. He produced two long-range aircraft, both lost on record attempts, and airliners for Air France, but in the main developed a successful family of fighters, the last of which, the D.520 of 1938-1940, was known as the “French Spitfire.”

Dewoitine fighters were eventually responsibility of SNCAM. Meanwhile, D.37 series of parasol-wing monoplane fighters was developed by Liore et Olivier, though name Dewoitine was sustained in fighter field primarily by the low-wing D.500 series, many of which were built by Liore et Olivier. Societe Aeronautique Frangaise gained greatest publicity with record-breaking D.332 Emeraude, first flown 1933, and with D.338 as used extensively by Air France in late 1930s. This latter aircraft was, perhaps, the finest 3-engined airliner in service before Second World War, and continued in use after fall of France.

In France, the Socialist Government of the so called Popular Front brought all the companies building military aircraft, aero engines and armament under its control in 1936. The im¬mediate result was the socialized oblivion of such established companies as Marcel Bloch, Bleriot, Nieuport, Potez, Dewoitine, Hanriot and Farman within half a dozen nationalized groups or Societies Nationales, named according to their geographical location (Nord, Ouest, Centre, Midi and so on).
During the war the Group formed the Societe Industrielle pour I’Aviation with the organization that represented General Motors in France, building the Arado Ar 196 and Ar 199 and developing the Ar 296.

DFW Stahltaub

The D.F.W. Stahltaube was a licence built version of the Jeannin Stahltaube reconnaissance and training aircraft of 1913.

The Deutsche Flugzeug-Werke G.m.b.H. firm at Lindenthal, Leipzig received an order for 18 of these copies but delivered only two.

Engine: Mercedes G 4 F, 94 hp
Length: 37.73 ft / 11.5 m
Wingspan: 45.932 ft / 14.0 m
Wing area: 322.92 sq.ft / 30.0 sq.m
Max take off weight: 1896.3 lb / 860.0 kg
Weight empty: 1323.0 lb / 600.0 kg
Max weight carried: 573.3 lb / 260.0 kg
Max speed: 59 kt / 109 km/h
Cruising speed: 51 kt / 95 km/h
Wing load: 5.95 lb/sq.ft / 29.0 kg/sq.m
Range: 205 nm / 380 km
Crew: 2

DFW Mars Eindecker

Reconnaissance aircraft, Germany, 1912

Engine : NAG 100 PS, 99 hp
Length : 31.824 ft / 9.7 m
Wingspan : 55.118 ft / 16.8 m
Wing area : 376.74 sq.ft / 35.0 sq.m
Max take off weight : 1808.1 lb / 820.0 kg
Weight empty : 1234.8 lb / 560.0 kg
Max. weight carried : 573.3 lb / 260.0 kg
Max. speed : 65 kts / 120 km/h
Cruising speed : 57 kts / 105 km/h
Wing load : 4.72 lb/sq.ft / 23.0 kg/sq.m
Range : 243 nm / 450 km
Crew : 2

DFW C.V

With the power of a 200hp Benz Bz IV, the top level speed was 155km/h at 1000m, while the C.V’s operational ceiling was 5000m. Built not just by DFW, but by four other sub-contractors. Just under 1,000 were in operation on every front at the end of September 1917. Armament comprised the standard 7.92mm guns, one fixed forward-firing and one mounted in the rear cockpit, plus light bombs.

Max. speed: 155 km/h / 96 mph
Ceiling: 5000 m / 16400 ft

Deutsche Flugzeubu-Werke GmbH / DFW / Allegemeine Transportanlagen Gesellschaft Maschinenbau (ATG)

Deutsche Flugzeubu-Werke GmbH / DFW was formed by Bernard Meyer at Lindenthal, Leipzig, in 1910, it built Maurice Farman biplanes under license and produced its own Mars biplane and a copy of the Jeannin Taube and Etrich Stahl-taube in 1914. During the war the DFW B series (unarmed) and C (armed) two-seaters were well known, the C V in particular being license-built also by Aviatik and Halberstadt. In 1916 DFW produced the R.I. and R.ll giant bombers, very clean designs with engines in the fuselage. Planned civil development of these after the war had to be abandoned and they were scrapped, but civil conversions of C types were built. The company built no aircraft after 1920, amalgamating with Allegemeine Transportanlagen Gesellschaft Maschinenbau (ATG).
ATG joined Siebel in 1945 to become Siebel ATG (SIAT).