Kalinin, Konstantin Alexievich

Konstantin Alexeyevich Kalinin (Russian: Константин Алексеевич Калинин) was born on December 29, 1899 in Warsaw. His father, a retired military man, died when he was only three years old. He completed his first studies at a local seminary.

During the 1905 disturbances in Russia, the young Kalinin was accused of distributing revolutionary bulletins, for which he was detained for four months. After being released he continued his teacher studies.

Between 1909 and 1912 Kalinin studied at the Odessa Higher Military Artillery School and after graduation was assigned to Vladivostok. A year later he would get married and have his first contact with aviation. Near the barracks where he was, was one of the first aviation units of the Russian Empire and these planes greatly impressed the young man, who requested to be transferred to a flight school, but was not allowed.

At the beginning of World War I Kalinin served as an artillery officer, but by February 1916 his dream of aviation came true when he was allowed to enter the Gatchina Military Flight School, graduating in December. The recently graduated pilot was assigned to the 26th Aviation Corps stationed on the Romanian front, where he flew reconnaissance missions in Farman and Voisin biplanes, receiving the Imperial Orders of Saint Stanislav, Saint Anne and Saint Vladimir.

After the October Revolution Kalinin joined the Red Army, serving as a pilot during the civil war and joining the ranks of the Communist Party in 1920. On June 1 of 1920, Kalinin entered the Moscow Aviation Technical School, created by Professor N. Ye. Zhukovski in 1919 and for the month of October, due to his excellent results, he validated the first year. By March 1921, Kalinin became head of the scientific-technical section of the school.

In 1922, his membership within the Communist Party was suspended on charges of sympathizing with the counterrevolutionary bands of the Ukrainian nationalist Petlyura and of party inactivity, but he was reinstated in June at the request of a member of the VS school party committee, Ilyushin, but in November he left the institution.

Kalinin moved to Kiev, where he started working at ” Remvozdux-6 ” aircraft repair factory as head of production. This factory, created in 1920, was dedicated to the repair of Red Army aircraft, mostly licensed model aircraft used during the First World War. Since his arrival, Kalinin grouped under his direction a design group made up of a technician (DL Tomashevich), two designers and two students linked to practical work: AT Rudenko and AN Gratsianski.

Determined to continue his studies at the end of 1922 Kalinin entered the Kiev Polytechnic Institute, where a year later he would be elected secretary of the Aviation Scientific Society. By 1923 he patented an elliptical wing of his own design, which would later be used on his civilian models. His graduation project in 1925 was the K-1 (RBZ-6) transport aircraft. Kalinin personally participated in the first flight of the K-1 and ended up graduating as a mechanical engineer. From that moment on he became one of the most renowned Soviet aircraft builders of the interwar period.

In 1926 Kalinin was transferred to Kharkov , where he was selected as chief designer of the UkrVozduxPut company, which was in charge of managing flights on local lines. Under his direction there were two designers, three specialists in wing configuration, fuselages and propellers, and two technicians.

The basis for his new KB was established in the aircraft repair shops of the UkrVozduxPut, which at that time was engaged in the repair of German Dornier aircraft used by Soviet-German airlines. This workshop had 25 workers and two German specialists on its payroll.

On September 17, 1926, these workshops, together with Kalinin’s team, would become the Kharkov Aviation Factory and would lay the foundations of the Kharkov Aviation Institute (JAI) , by creating classrooms for the preparation of workers. The Kharkiv Institute of Technology also created an aviation department for the preparation of engineers, which some time later would be transferred to the JHA.

Later, an aerodynamic laboratory was built where a 2-meter wind tunnel was installed in which Kalinin’s second model, the K-2, would be tested.

KA Kalinin in the second half of the 30s.

The work of the Soviet specialists in the UkrVozduxPut soon created problems with the Germans, which came to a head when the German model Dornier Mercur found a competitor in the domestic model K-2.

The leadership of the UkrVozduxPut was divided, with the supporters of the foreign model winning. As a result, Kalinin’s group was decremented, new specialists from Kiev were brought back, and development of the K-2 was halted.

In these circumstances, the Ukrainian government took action on the side of Kalinin. Soon the pro-German leadership of the UkrVozduxPut was removed from their posts, the Dornier Mercur was not bought and the K-2 was built and tested. Despite the fact that the K-2 did not show superiority in relation to the K-1 and was not produced, it served to prepare the mechanisms of the industry and was soon followed by more successful models such as the K-4 of 1928 (39 built) and the 1929 K-5(260 built), which managed to lay the foundations for national civil aviation, which meant the end of German dependence.

After some civilian models, Kalinin began the development of military models with the gigantic K-7 bomber, which would be destroyed during tests in 1933. Two improved models, one as a bomber and one as an airliner, began construction in Voronezh, but were abandoned in 1935. Later military aviation development was continued with the K-12 (VS-12) tailless bomber.

Kalinin ‘s KB was transferred to the Voronezh Aviation Factory (Factory No.18) where development of the K-12 continued. The new model had been ordered for production but the evaluation in the tests led to its configuration being considered as lacking in perspective and the development was abandoned (dragging with it other aircraft with a similar configuration such as the Moscaliov SAM-7).

In April 1938 he would be arrested on the charge of “enemy of the people” and shot in the Voronezh prison on October 22. His construction bureau was liquidated.

KA Kalinin’s career in aviation lasted only 13 years, in which he designed 16 models. Most of Kalinin’s designs were high-wing, elliptical-shaped, braced monoplanes with a tubular steel structure and wood and fabric covering, characteristic of his time.

Kalbermatten Delka

The 1994 Delka glider apparently flew well enough on early test flights with weight shift for pitch control, and tip rudders for roll however weight shift for pitch must have been compromised with the pilot moved inside the wing (no pendular agumentation). The pitch control was some how assisted by control surfaces.

Apparently the test pilot Didier Favre was killed on testing due to structural failure. Laurent Kalbermatten dropped the concept however has proceeded with the Woopy Fly paraglider hang glider hybrid.

Wing area: 13.7 m²
Wing span: 10.5 m
Hang glider weight: 25 kg

Kalbermatten Woopy

The Kalbermatten Woopy is a Swiss high-wing, single-place, hang glider that was designed by Laurent de Kalbermatten of Villars-sur-Glâne, Switzerland. The price was about 15’000CHF and ready to fly about 10 minute.

The Woopy fuselage is made from aluminum tubing, with a conventional tail, a seated pilot position and weight shift controls. The wing is inflatable and based on the same concept as an air mattress, kept inflated by two small battery-powered fans. Launch and landing is carried out on foot.

Much of the development was undertaken using scale flying models to speed construction and reduce pilot risk.
Two models were developed, the Woopy Fly and the Woopy Jump, plus a powered version of the Woopy Fly.
The Woopy Fly aircraft was developed in Siberia and can be assembled in 15 minutes, the wing is inflated by two small electric fans underneath the wing, and it is powered by small 20 hp engine.

Variants:

Woopy Fly
Initial model
Wingspan: 9.7 m (31.8 ft)
Aspect ratio: 4.58:1
Wing area: 20.5 sq.m (221 sq ft)
Empty weight: 17 kg (37 lb)
Glide ratio: 9:1

Powered Woopy Fly
Engine: HE R120 120 cc two-stroke, 20 hp
Propeller: 70 cm (28 in)
Empty weight: 123 lbs (56 kg)
MTOW: 240 lbs (109 kg)
Cruise speed: 32 kts / 37 mph / 59 kph
Stall speed: 23 kts / 26 mph / 43 kph
VNE: 40 kts / 46 mph / 74 kph
Take-off distance: 197 ft (60 m)
Landing distance: 164 ft (50 m)
Fuel consumption: 1 GPH (3.8 LPH)

Woopy Jump
More portable development model
Empty weight: 7 kg (15 lb)
Folded length: 160 cm (63 in)

Kaiser-Hughes

Henry J. Kaiser was a world leader in shipbuilding, associated primarily with the prefabricated Liberty Ship of Second World War. In 1942 Kaiser proposed construction of 5,000 transport flying-boats for troop carrying. Lacking aviation experience, he formed a joint company with Hughes Aircraft, Hughes to undertake design and Kaiser construction of the Hughes-Kaiser HK-1, the world’s largest aircraft. In November 1942 a contract was signed for three aircraft, one for static test and two for flight. By 1944 construction of the first was still at the preliminary stage, and the U.S. Army and Navy withdrew technical assistance. The contract was reduced to one aircraft; Kaiser withdrew, and thereafter the design was called the Hughes H-4 Hercules.

Kaiser DEKO-9 Magic / Dakomat Deko 9 Magic / Deko 9 Magic

A single-seat aerobatic sports and recreation biplane, the prototype aircraft developed on order from the German Kaiser-Flugzeugbau GmbH. The construction of the prototype, strength tests and flight tests carried out in Military Aviation Plant No. 3 Deblin (later called the Military Aviation Plant No. 1 SA branch) in Dęblinie, Poland. The design work, construction of prototypes and the necessary infrastructure took from 1996 to 1998.

The team headed by Lt.-Col. MSc. Wieslaw Pochylskiego, established a composites laboratory and strength tests, and a thermal tent enabling the study of metal-composite structures at elevated temperatures. Other members included Dr. Eng. Marek Debski and M. Sc. Christopher Kotliński. Builders and MSc. Marian Jakoniuk, MSc. Witold Wiraszka, Eng. Bruno Biernacki and Dr. Eng. Daniel Debski.

Calculations and strength tests were conducted by M.Sc. Vladimir Urbaniak – load, dr. Andrew Szot, MSc. George Mularczyk – static strength tests, Dr. Eng. Wojciech Hajec, MSc. James Kulecki – model airplane spin research, Warsaw University of Technology.

A biplane, the crew seats in tandem with a one-piece canop, and with a fixed main landing gear and tail wheel. The supporting structure of the fuselage is duralumin tube in composite nodes. The wings are double-girder construction with beams made of duralumin tubes and fixed to them duralowej pressed sheet metal ribs. The tail is welded construction made of thin-walled steel pipes. Polish made aircraft are overed with a heat-shrinkable polyester fabric, Dekonit 140 g / m².

First flight of the aircraft on 30 September 2000 and flight tests were performed by test pilot, MSc. , Maciej Aksler. The aircraft was presented at exhibitions air: ILA Berlin 1998 and 2000 and Fredrichshafen AERO 1999 and 2001.

ILA Berlin 2000

The engine of six produced by PZL Rzeszow was the 200 hp PZL Franklin 6A-350C1R , suitable for inverted flight and driving a three-bladed MT-Propeller MTV-9-DC / C188-18a propeller with hydraulically controlled pitch.

Also developed of four-cylinder Franklin 4A-235B4 92 kW (125 hp) powered version with open cockpit.

Engine: PZL Franklin 6A-350C1R, 205 hp (150 kW)
Span: 6.8 m
Length: 6.5 m
Height: 2.2 m
Wing area: 15.4 m²
Empty weight: 500 kg
Useful load: 250 kg
MAUW: 750 kg
Fuel capacity: 100 lt
Max speed: 220 km / h (119 kts IAS)
Cruising speed: 190 km / h (103 kts IAS)
Minimum speed: 90 km / h (49 kts IAS)
Vne: 350 km / h (189 kts IAS)
Rate of climb: 12 m / s (2362 ft / min)
Ceiling: 4000 m (13123 ft)
Range: 700 km (378 nm)
Take-off dist: 120 m (393 ft)
Landing dist: 120 m (393 ft)
Load factor design: + 6 / -3 g
Seats: 2

Deko-9 Magic

Kahnt Falke / Falcon

Thirteen meter span monoplane – with which two passengers could be carried beneath the pilot – built by Oswald Kahnt in Leipzig-Lindenthal. Kahnt was taught to fly by Hans Grade and opened the “1. Sächsische Fliegerschule” in Leipzig. Apart from some Grade machines, he built this monoplane during 1911. The power-plant used was initially a 45 hp Oerlikon; later a 70 hp Schröter inline engine was installed. With his “Falke”, Kahnt flew over the “Völkerschlachtdenkmal.” As head pilot at the Gothaer Waggonfabrik during the war, he was killed in a crash.