The Kinner C-5 was an American five cylinder radial engine for small general and sport aircraft of the 1930s. The C-5 was a development of the earlier R-5 with greater power and dimensions. The main change was the increase in cylinder bore from 128 mm (5.0 in) to 143 mm (5.625 in) and an increase in cylinder stroke from 140 mm (5.5 in) to 145 mm (5.75 in). This led to a corresponding increase in displacement from 8.85 liters (540 cu in) to 11.71 liters (715 cu in).
The U.S. military designation was R-720.
Applications: Consolidated YPT-11B Kellett K-3 Kinner P Stearman YPT-9C Verville YPT-10D Waco OSO Waco OEC Waco ODC Waco OBF
Specifications: Type: 5-cylinder air cooled radial Bore: 5.625 in (143 mm) Stroke: 5.75 in (145 mm) Displacement: 715 cu in (11.71 liters) Length: 34.8in (884 mm) Diameter: 50 in (1,270 mm) Dry weight: (dry) 420 lb (190 kg) Valvetrain: 1 inlet and 1 exhaust valve per cylinder Fuel system: 1 Stromberg carburetor Fuel type: 73 octane Cooling system: Air Power output: maximum 245 hp at 2,200 rpm , cruise 210 hp at 1,900 rpm Compression ratio: 5.25:1 Specific fuel consumption: 0.6 lb (273 gm) /hp/hr Oil consumption: 0.015 lb (7 gm) /hp/hr
The Kinner B-5 was a popular five cylinder American radial engine for light general and sport aircraft of the 1930s.
The B-5 was a development of the earlier K-5 circa 1928, with slightly greater power and dimensions. The main change was the increase in cylinder bore from 108 mm (4.25 in) to 117 mm (4.625 in) and a corresponding increase in displacement from 372 cu in (6.1 liters ) to 441 cu in (7.2 liters ).
One difference the B-5 had from radial engines of other manufacturers was that each individual cylinder had its own camshaft, a system also used by the contemporary Soviet-built Shvetsov M-11 five cylinder radial, while most other radial engine designs used a “cam ring” for the same purpose, connected to every cylinder’s valves.
The B-5 was a rough running but reliable engine and the B-5 and its derivatives were produced in the thousands, powering many World War II trainer aircraft, its military designation was R-440. The B-5 was followed by the R-5 and R-55.
Specifications: Kinner B-5 Type: Five-cylinder, air-cooled, radial Bore: 4 5⁄8in (117mm) Stroke: 5 1⁄4in (133.3mm) Displacement: 441 cu in (7.2 liters) Length: 19 in (482mm) Diameter: 45⅜ in (1152 mm) Height: 4.5 in (1,104.8mm) Dry weight: 295 lb (134 kg) Valvetrain: 1 Inlet and 1 Exhaust valve per cylinder, individual camshafts for each cylinder Fuel system: 1 Stromberg Carburetor Fuel type: 73 Octane Cooling system: Air Power output: 100 hp at 1810 rpm, 125 hp at 1,925 RPM max/89 hp at 1,725 RPM cruise Compression ratio: 5.26:1 Power-to-weight ratio: 0.42 hp/lb at cruise
The Kinner K-5 crankcase is manufactures from heat treated aluminium alloy castings, consisting of three pieces, the main cylinder sections and front and rear covers. The removal of the covers makes immediately accessable the crankshaft, bearings, master and link rods, cam gears, followers and magneto drice gears.
The crankshaft is of a special heat treated chrome nickel steel drop-forging, machined all over, counter balanced and supported on two main bearings of special bronze backed babbit. The thrust bearing is a Hoffman ball bearing. Special force feed lubrication is to the link pins.
A special air heater is provided permitting air to be drawn from top or side of the fuselage. A special annualar intake passage is cast in the main crankcase distributes the combustable mixture.
Valve rocker arms are enclosed in a streamlined cover. Inlet and exhaust valves are both necked type of special heat resisting steel alloy. There are individual camshafts for each cylinder.
Accessories available at extra cost were Heywood self starter, Eclipse hand turning gear, and propeller hub.
The Kinner K-5 was a popular engine for light general and sport aircraft developed by Winfield B. ‘Bert’ Kinner. With the boom in civilian aviation after Charles Lindberg’s transatlantic flight the K-5 sold well. The K-5 was a rough running but reliable engine and the K-5 and its derivatives were produced in the thousands, powering many World War II trainer aircraft. The K-5 was followed by the B-5, R-5 and R-55. Circa 1928, the K-5 produced 100 hp at 1810 rpm, with 73 Octane fuel.
Kinner K-5 in a Fleet Model 2
Applications: Adcox Special Davis D-1-K Fleet 2 Kreutzer Air Coach Waco KSO
Kinner K-5 Type: Five-cylinder, air-cooled, radial Approval Type Certificate No.3 Dept of Commerce Rating: 90 hp at 1810 rpm Commercial Rating: 110 hp at 1880 rpm Power cruise: 70hp at 1,650 rpm Displacement: 327 cu.in / 6.1 liters Compression ratio: 5.0-1 Bore: 4 1/4 in / 108mm Stroke: 5 1/4 in / 133.3mm Length: 32 1/4 in Height: 43.5in (1,104mm) Diameter: 43 in Weight: 278 lb Fuel consumption: not more than .60 lb/hp/hr Oil consumption: not more than .025 lb/hp/hr Lubrication: Circulating oil system, pressure feed to front & rear main bearings, and to plain link pins, through grooved master rod bearings. Ignition: Dual Scintilla Carburation: 1 Stromberg NAR-5-A or Holley Spark plugs: 2 per cylinder B.. No.4 Hornet Valvetrain: 1 inlet and 1 exhaust valve per cylinder Fuel type: 73 Octane Price: $1800 f.o.b. Glendale
During 1937 company still offered six types of engine and was working on twin-engined Invader, but in 1938 was in receiver’s hands, though continuing operations under control of a trustee.
Kinner Airplane and Motor Corp. introduced an airplane of its own design in 1932. The side-by-side two-seat Sportster series of low wing taildraggers was powered by 100-hp Kinner five-cylinder radial engines. Some have been repowered with the 125-hp Kinner. The aircraft employed a mixed construction with the conventional fabric-covered wooden wings and fabric-covered steel-tube fuselage combination.
The Sportwing was a refined version with eight built circa 1935.
Kinner Sportwing
Engine 100-hp Kinner Seats 2. Gross wt. 1,875 lb. Empty wt. 1,218lb Top speed 104 mph Cruise 90 mph. Initial climb rate 800 fpm. Ceiling 14,000 ft. Range 340 miles
Another version of the Sporster, named the Playboy, was a cabin model powered by a 160-hp Kinner. It featured wire-braced rather than strut-braced wings; otherwise, construction was essentially the same. A total of eight were manufactured in 1935 by Kinner.
Engine: Kinner 5 cyl, 150 hp. Max speed SL: 138 mph. Cruise: 125 mph. Wing span: 32 ft 9 in. Empty wt: 1461 lb. MAUW: 2270 lb.
Formed in 1919. Known chiefly for its air-cooled radial engines. Aircraft designed by the company round its own engines included Courier two-seat parasol monoplane of late 1920s. In 1930s was producing Sportster strut-braced low-wing monoplane with open side-by-side seats. Sportwing was refined version, Playboy was wire-braced and enclosed and Envoy was scaled-up Playboy seating four. Three Envoys acquired by U.S. Navy as XRK-1 were not experimental, but staff transports. During 1937 company still offered six types of engine and was working on twin-engined Invader, but in 1938 was in receiver’s hands, though continuing operations under control of a trustee.
1920s-1935: 635 West Colorado Boulevard Glendale California USA