Slepcev Storch

The Slepcev Storch is a kit plane designed by Nestor Slepcev and is produced at the factory in Beechwood, Port MacQuarie, Australia. The Slepcev Storch is a dual control 75% scale replica of the Feisler Fi-156 Storch modified for simplicity. Initially designed in 1992 as a single seater, the Slepcev Storch is produced as a two seat tandem Ultralight STOL aircraft.

The Slepcev Storch is JAR-VLA certified, Type Certificate No.VA505 issued by the Australian CASA on 14 October 1991. It also meets Australian Noise Certification to standard 66.8dBA.

The plane was designed around a light fuselage rated at +6/-3G. Reportedly it will fly as slow as 20 mph with full flaps and 30% power. The construction is 4130 chromemoly steel tubing for the fuselage, rudder and elevator. The wings are all-aluminium and the main landing gear is made of 4130 tubing with 10 inches of travel. Standard wheels are 8.00 x 6 mains, and a Maule tailwheel. Brakes are hydraulic disc, and the fuel is contained in the wings.

The kit consists of JAR-VLA certified components and is fully welded with the fuselage and empennage primed for protection against corrosion. Also supplied are upholstered seats, the main landing gear, wheels, hydraulic disc brakes and the Maule tailwheel. The aluminium wingspars and ribs are pre-drilled and the lightening holes are flanged. All the hardware is included, as are the wingskins. Much of the control system is installed, including the stick and all of the fuselage pushrods. The Lexan windows are supplied, and all hardware. No special tools are required.

Slepcev Storch Mk.4

The interior measures 2.6 ft wide, 3.3 ft high, and 4.9 ft long. The fuel tank holds three hours and an optional 26.4 gallon belly tank can add another four hours.

The controls are aluminium pushrods, through the rudder and the elevator trim trim are controlled by cables. The brakes are toe-operated.

Avaliable ready to fly or as an advanced kit 2009 Price: A$44,000.

Slepcev Microlight Storch
Stall: 22 kt / 25 mph / 41 kmh
Cruise: 72 kt / 83 mph / 133 kmh
VNE: 80 kt / 92 mph / 148 kmh
Empty Weight: 289 kg / 637 lbs
MTOW Weight: 450 kg / 992 lbs
Climb Ratio: 800 ft/min / 4 m/s
Take-off distance (50ft obstacle): 30 ft / 9 m
Landing distance (50ft obstacle): 30 ft / 9 m

Engine: Rotax 618, 75 hp
HP range: 65-100
Height: 7.5 ft
Length: 21.33 ft
Wing span: 33.5 ft
Wing area: 160 sq.ft
Weight empty: 618 lb
Gross: 1056 lb
Fuel cap: 14 USG
Speed max: 78 mph
Cruise: 65 mph
Range: 300 sm
Stall: 16 mph
ROC: 1200 fpm
Take-off dist: 30 ft
Landing dist: 50 ft
Service ceiling: 16,500 ft
Seats: 2
Landing gear: tail wheel

Engine: Rotax 912, 80 hp
HP range: 80-120
Height: 7.5 ft
Length: 24 ft
Wing span: 33.7 ft
Wing area: 180 sq.ft
Empty weight: 650 lb
Gross weight: 1200 lb
Fuel capacity: 18 USG
Top speed: 95 mph
Cruise: 75 mph
Stall: 16 mph
Range: 250 sm
Rate of climb: 1200 fpm
Takeoff dist: 30 ft
Landing dist: 50 ft
Service ceiling: 15,000 ft
Seats: 2 tandem
Landing gear: tailwheel

Engine: Rotax 912S, 100 hp
Length: 22.3 ft
Wing span: 32.8 ft
Wing area: 172.2 sq.ft
Empty weight: 771.6 lb
Gross weight: 1212.5 lb
Fuel capacity: 19.8 Gal
Top speed: 78 kt
Cruise: 70 kt
Stall: 25 kt
Rate of climb: 700 fpm
Takeoff dist: 50-100 ft
Landing dist: 50-100 ft
Service ceiling: 15,000 ft
Seats: 2
2009 price (JAR-VLA) fly away: A$63,000
2009 price (JAR-VLA) Advanced kit: A$44,000
2009 price (JAR-VLA) kit: A$35,000

Slepcev Storch Mk.4
Engine: Rotax 912, 80 hp
Wing span: 10 m
Wing area: 16 sq.m
MAUW: 450 kg
Empty weight: 289 kg
Fuel capacity: 75 lt
Max speed: 150 kph
Cruise speed: 125 kph
Minimum speed: 27 kph
Climb rate: 6 m/s
Seats: 2
Fuel consumption: 11 lt/hr
Price (1998): 77,000 DM
Kit price (1998): 29,650 DM

Sky-Walker Sky-Walker

The two-seat Sky-Walker Sky-Walker 1+1 was popular as an ultralight training aircraft. The airframe exists out of an aluminium-tube construction. The plane is constructed out of alu-tube covered with sailcloth. As powersource the Sky-Walker 1+1 had a four cylinder, horizontal opposed air-cooled Limbach L 1700 EA engine. The L 1700 EA was a perfect engine for the ultralight Skywalker with a continous 56 hp (maximum 60 hp) and a weight of only 73 kg.

The dated Limbach engine of the PH-1U9 was replaced by a Rotax 462 UL CB.

Sky-Walker II
Engine: Rotax 582 UL DCDI
Stall: 32 kt / 37 mph / 60 kmh
Cruise: 43 kt / 50 mph / 80 kmh
VNE: 54 kt / 62 mph / 100 kmh
Empty Weight: 68 kg / 150 lbs
MTOW Weight: 159 kg / 350 lbs
Climb Ratio: 1000 ft/min / 5 m/s
Take-off distance (50ft obstacle): 330 ft / 100 m
Landing distance (50ft obstacle): 490 ft / 150 m

SkyStar Aircraft Corp

Marketed kits for developed versions of the original Denny Kitfox (first flown 1984), as the Kitfox Classic IV side-byside two-seat high-wing cabin lightplane, Kitfox Series 5, long-wing Kitfox Speedster, and Kitfox Vixen with nosewheel undercarriage.

In 1996 SkyStar Aircraft acquired the right to produce and sell Aero Designs Inc Pulsar line, which they produce at SkyStar’s Nampa, Idaho facility.

Also offers kits for Pulsar II composites- built low-wing monoplane (as two-seat development of original Star-Lite), and Pulsar XP with more engine power.

1997: 100K N. Kings Road, Nampa, ID 83687, USA.

1998:
3901 Aviation Way
ID 83605 Caldwell
USA

Sky Sports Humbug

While the Humbug is foot-launchable and foot-recoverable, “auxiliary” wheels are available as well as floats, skis, ice skates or dune buggy wheels. The convenient mixer stick operates three-axis controls, and foot pedals operate the rudder. Construction, for the most part, consists of aluminum tubes and channel fittings, plastic end caps, nylon cable eyes, stainless cables and 3.8-ounce Dacron envelopes for the tail and wings. Power for the Humbug can come from several options; the most popular to this point is a twin-engine Gemini power system that uses a Partner (Swedish chain saw) engine which can be modified to develop from five to nine hp. Chrysler engines which are rated at 10 hp each are also available. Setting up the Humbug for flight requires only 20 minutes. It was available as a finished, test-flown airplane or as a kit.