Canadian Light Aircraft Sales & Services Inc / CLASS / Club Aeronautique Delisle Incorporated / CADI / Bushcaddy International Inc

The company started as a flight training operation called Club Aeronautique Delisle Incorporated (CADI), based in Lac Saint-Jean, Quebec. It was founded by Jean Eude Potvin who designed the CADI R-80 and put it into production as a kit aircraft in 1994. He went on to design and build the R-120 and L-160.

Club Aeronautique Delisle Incorporated / CADI
1998:
3690, avenue Grande-Decharge
G0W 1LO Delisle
Qebec
Canada

Sean Gilmore and Marlene Gill started a flight training venture at Montréal/Saint-Lazare Aerodrome, operating a CADI R-80 aircraft. Impressed with the design they became distributors for Potvin, handling marketing outside of Quebec. In 1998 Potvin expressed a desire to retire and Gilmour and Gill bought CADI, including the rights to the R-80, R-120 and L-160 aircraft designs. They renamed the company Canadian Light Aircraft Sales and Service, commonly called CLASS. Between 1998 and 2001 Potvin still produced parts, as CLASS assumed production. Potvin retired in 2001.

To preserve the CADI name the aircraft line was called BushCaddy, a play on the abbreviation and the meaning of one who carries. To expand production the company moved to larger accommodation at nearby Les Cedres, Quebec. By 2005 they had five employees with Gilmore doing the design and engineering work and Gill handling the marketing and financial aspects. Gilmore designed the Bushcaddy L-162 Max and L-164.

2009 Company owners Sean Gilmore and Marlene Gill

2009: 177-179 Joseph Carrier, Vaudreuil-Dorion, Qc., J7V 5V5, Canada

In about 2010 Gilmore and Gill retired and sold the company to Tony Watkin, an Australian who relocated it to Lachute, Quebec and renamed it after the aircraft line itself, Bushcaddy International Inc.

In November 2012 the company moved production to the Cornwall Regional Airport at Summerstown, Ontario and also accepted a contract with the airport to operate the UNICOM radio service.

Canadian Home Rotors Baby Belle Safari    

Canadian Home Rotors Inc. (CHR) are the manufacturers of the Safari helicopter. A scaled Bell 47G look alike, that has consist¬ently placed at the top of the custom built helicopter pile. Originally called the Baby Belle, but after objection from Bell Helicopters the name was changed to Safari.
A two seat side by side enclosed helicopter, the 4130 steel tube frame cabin monocoque and boom can be made up in the home workshop while awaiting delivery of the factory built main rotor and tail rotor gearboxes along with the main rotor head and blades. Main rotor is gear driven, tail rotor is shaft driven. Tail boom is steel tube. The main rotor blades are skinned all-aluminium with extruded aluminium leading and trailing edges. Blades are shaped by one solid rib each 6 inches from the root to three feet outboard, then one rib per 12 inches to the tip. Each blade contains 16 ribs. The main rotor flies at 500 rpm, and tail-rotor at a 5.4:1 rpm ratio.
The four foot diameter, 4 inch chord tail rotor blades are stainless steel, with a solid steed spar running out 6 inches from each blade root and wrapped with stainless sheeting to form the airfoil.
The main rotor gearbox includes clutches and engine fan. The cabin bubble is sourced from Nordam Plastics, manufacturers of the original Bell 47 item. The bubble is an actual Bell 47 series enclosure.
A Delta teetering system provides the control. Aluminium castings are used in the swashplate-controlled main rotor system.
The instrument panel carries operational instruments and a main transmission temp indicator and chip detectors for the main and tail rotor gearboxes. Engine, seats and cockpit fittings were generally the items sourced from written off Robinson R22.
Fuel capacity of 28 US gallons is carried in two 14 USG aluminium tanks aft of the cabin.
Skid landing gear is built with 2 inch diameter tubing, the bottom horizontals black anodised.
In 1996 the kit price was US$38,000.

CHR are constantly improving the Safari with experience, including increased service intervals on the main rotor gearbox. Build weight is always slightly different between machines but generally just under 1,000 lbs., which allows a useful load of better than 500 lb. The 12 foot span blades feature an eight inch chord and weigh 40 lb. each.
The Safari is powered by a Lycoming 160 hp aircraft engine, maintaining the highly trustworthy flying abilities of this classic design. Cruising speed is 80 mph with climb rate of 1,000 fpm & an operating ceiling of 10,000ft. Max. speed is 100mph.
A US corporation, CHR International Inc acquired Safari Helicopter. The owners of CHR International Inc., Bobby and Delane Baker, have been involved with Safari for several years. Murray Sweet, one of the original developers of the Safari, was to remain involved with the new company as a technical consultant, as will other long time members of the Safari team.
Much of the production was to remain in Canada, with assembly and flight training continuing in Marianna, Florida. They reduced the dealership requirements in most parts of the world, with positive results.

Gallery

Engine: Lycoming O-320, 150 hp.
HP range: 150-180.
Disk span: 25 ft 11 in
Rotor Blades chord: 8 in
Disk area: 490.6 sq.ft.
Width 6 ft
Height 8 ft
Length 29 ft 8 in
Weight empty: 920-945 lbs.
Gross: 1450 lbs.
Speed max: 100 mph.
Cruise: 80 mph.
Range: 200 sm.
ROC: 1000 fpm at 45 mph.
Service ceiling: 10,000 ft.
HIGE: 7000 ft
HOGE: 2000 ft
Fuel cap: 28 USG.
Seats: 2.
Landing gear: skids.

Engine: Lycoming O-320, 150 hp
Rotor span: 7.30 m
MAUW: 750 kg
Empty weight: 372 kg
Fuel capacity: 108 lt
Max speed: 160 kph
Cruise speed: 145 kph
Minimum speed: 0 kph
Climb rate: 5 m/s
Seats: 2
Price (1998): $88,500
Plan price (1998): $150
Kit price (1998): $38,430

Canadian Car & Foundry FDB-1 Gregor Fighter        

Can Car’s final attempt to produce its own design was the FDB 1, the so called ‘Gregor Fighter’, named after Michael Gregor, the chief aeronautical engineer who preceded Miss MacGill. The FDB 1 was designed as a highly manoeuvrable, biplane fighter/dive bomber with retractable undercarriage and powered by a Pratt & Whitney R 1535 SI34 G Twin Wasp Junior. The fuselage was of stressed skin construction while the wings were fabric covered metal structures with trailing edge flaps on upper and lower planes and automatic leading edge slots on the former. Port and starboard sections of the upper wing were separate, joining the fuselage in a modified gull wing form, which helped to improve forward visibility.
Despite the excellent manoeuvrability of the prototype, which first flew on 17 December 1938 at Fort William, Ontario, its speed was considerably less than had been predicted and there were problems with controls and flaps. Aircraft of this type were rapidly becoming outdated and, since by this time CCF had become involved in what was to be its most successful contract, the Gregor Fighter was placed in storage at Cartierville, Quebec, where it was burned in 1945.

Canadian Car & Foundry Maple Leaf II

The Maple Leaf I was followed by the Maple Leaf II, which, despite the name, had little more than the empennage in common with its predecessor. The design and engineering team, led by Miss E G MacGill, at that time the only female chief aeronautical engineer in Canada, had the prototype ready for its first flight in the fall of 1939. Although it gave creditable performances in tests by the Department of Transport and the RCAF, the Maple Leaf II never reached the production line, mainly because at that time the company had already committed its Fort William plant to the production of the much needed Hurricane. The prototype, along with various components and parts of at least two partly finished aircraft, was eventually exported to Mexico.

Canadian Car & Foundry / Cancargo Aircraft Manufacturing Co Ltd

The Canadian Car and Foundry Company Ltd, called CCF and later Can-Car, was established in 1909 as a manufacturer of railway rolling stock, with its head office in Montreal and production facilities in several other locations.
In 1937 acquired license to build Grumman GE-23 (FF-1) two-seat biplane fighters, in factory at Fort William, Ontario. Built prototype of FDB-1 fighter biplane in 1938. Orders for large numbers of Avro Ansons, Hawker Hurricanes, Avro Lancasters, and Curtiss Helldivers were received. Seven new factories opened by mid-Second World War.
Early post-war obtained Canadian license for Burnelli “lifting fuselage” designs; flew prototype CBY-3 (twin Wasp engines) August 1945. Accommodation was three crew plus 38 passengers or 22 passengers and freight. Development of CBY-3 by subsidiary Cancargo. In 1947 acquired assets of Noorduyn Aviation Ltd.; continued manufacture of Mk V Norseman and variants until early 1950s; resold it to its designer in 1953. In early 1950s designated products “Can-Car,” beginning with North American Harvard Mk 4s built under license at Fort William for RCAF and NATO air forces. Gained contract to build 100 BeechcraftT-34A Mentor piston-engined trainers in 1952-1953 for USAF and also for RCAF. Retitled Canadian Car Company Ltd in mid/late 1950s.

Canadian Airmotive CAM 100 / Firewall Forward CAM 100

The Firewall Forward CAM 100 is a 100 hp (75 kW) four-cylinder, four-stroke liquid-cooled piston aircraft engine built by Firewall Forward Aero Engines. Originally designed and built by Canadian Airmotive as the CAM 100 and later marketed by The Cam-Fire Engine Group, it is based on a Honda Civic automotive piston engine. Unit cost was US$8,450 in 2005.

Applications:
Blue Yonder Merlin
Denney Kitfox V
Murphy Rebel
Zenith Zodiac CH 601

CAM 100
Type: Four-cylinder, four-stroke piston engine
Bore: 74 mm (3.07 in)
Stroke: 86.5 mm (3.41 in)
Displacement: 1488 cm3 (90.7 cu in)
Length: 32 inches (810 mm)
Width: 19.5 inches (500 mm)
Height: 25 inches (640 mm)
Dry weight: 226.2 pounds (102.6 kg)
Valvetrain: overhead camshaft
Fuel type: 90 Octane petrol or 100LL aviation petrol
Cooling system: Uses a water-glycol mixture with a camshaft belt driven water pump.
Reduction gear: 2.4:1 reduction ratio (6,000 rpm engine, 2,500 rpm propeller).
Starting system Electric gear reduction starter.
Power output: 100hp (74.6 kW) at propeller flange.
Specific power: 130 kW/L (1.10 hp/cu in)
Compression ratio: 9.6:1
Specific fuel consumption: 0.43 lb/bhp/hr at 80% power

Firewall Forward CAM 100
Cycle: 4 stroke
No cylinders: 4 inline
Bore: 74 mm
Stroke: 86.5 mm
Compression: 9.6
Displacement: 1488 cc
Cooling: liquid
Ignition: Electronic
Reduction: Crantee Belt 2.4/1
Dimension: 570 x 641 x 813 mm
Weight: 101.9 kg
Max pwr: 105 hp
Price 1998: $7950

Canadian Aerodrome Company Hubbard Monoplane “Mike” 

The Canadian Aerodrome Company Hubbard Monoplane “Mike” (Hubbard II) designed and built in Canada in 1910.

J. A. D. McCurdy set up the Canadian Aerodrome Company after the AEA was dissolved. Gardiner Hubbard was a cousin of Bell’s wife, Mabel Gardiner Hubbard.

The Hubbard Monoplane, also nicknamed “Mike”, was designed by John McCurdy and built by the Canadian Aerodrome Company. It was commissioned by Gardiner Greene Hubbard II of Boston. The monoplane was constructed at the Beinn Bhreagh estate of Alexander Graham Bell in Baddeck, Nova Scotia, by John McCurdy and F. W. “Casey” Baldwin. The aircraft was the third to be built by the Canadian Aerodrome Company, and the first to represent an indigenous design, although loosely based on the Blériot XI. The aircraft made two brief flights on 3 March 1910, flown by McCurdy.

After it was shipped to Montreal for the 1910 Montreal Air Meet, Hubbard was unsuccessful in flying the aircraft, it possibly being too low-powered to do more than taxiing. Shortly after, Hubbard had the aircraft dismantled and shipped to Boston, making it the first Canadian aircraft sold and built for export. The intent was to enter the aircraft at the Harvard-Boston Aero Meet in Boston. The aircraft was displayed at the aero meet, and was included in the photographs of the flight line, but it did not leave the ground.

Baddeck No. 2
Engine: 1 × Kirkham air-cooled piston engine, 40 hp (30 kW)