Chrislea CH.3 Ace / Skyjeep

Super Ace

At Exeter Airport, during 1948-1950, a series of four-seat lightplanes were constructed: Series 1 CH.3 Ace, Series 2 CH.3 Super Ace, and Series 4 CH.3 Skyjeep. The first of these high-wing cabin monoplanes was flown in August 1946, but high operating costs and unacceptable control system affected sales of the Ace and Super Ace.

The prototype CH.3 Series 1, was fitted with a 125 hp Lycoming engine, a single fin and rudder, and a wooden wing.

Production versions, the CH.3 Series II, was all-metal and fitted with a 145 hp DH Gipsy Major 10 engine. It also has the twin fin and rudder assembly later fitted to the prototype.

The CH.3 Series III had a tailwheel landing gear.

The Series IV version of the Series III had a hinged rear fuselage deck.

By August 1959 the tail wheel undercarriage CH.3 Srs. 4 Skyjeep VH-RCD four-seater had a deepened rear fuselage.

Skyjeep VH-RCD
Chrislea Super Ace

Gallery

Engine: 1 x Gypsy Major Mk.10, 145 hp
Wingspan: 36 ft
Length: 21 ft 6 in
Empty weight: 1344 lb
Loaded weight: 2350 lb
Max speed: 126 mph
Cruise: 110 mph
Stall: 38 mph
Range: 400 mi
Seats: 4

Chrislea

Chrislea was based originally at Heston, Middlesex, in 1936, building joint designs of R. C Christophorides and B. V. Leak. In 1938 one L.C.1 Airguard was built, a two-seat, low-wing cabin monoplane for Civil Air Guard. Company transferred to Kentish Town shortly before Second World War, undertaking subcontract work for aircraft industry. Moved again in 1947 to Exeter Airport, where during 1948-1950 a series of four-seat lightplanes were constructed: Series 1 CH.3 Ace, Series 2 CH.3 Super Ace, and Series 4 CH.3 Skyjeep. The first of these high-wing cabin monoplanes was flown in August 1946, but high operating costs and unacceptable control system affected sales of the Ace and Super Ace; more conventional system used on 1949 Skyjeep. Total production (all three types) about 26 aircraft. In 1952 assets acquired by C. E. Harper Aircraft Ltd and all surviving models were scrapped.

Chincul SACAIFI

In response to the considerable aging and reduction of the inventory of the country’s air fleet, the FAA encouraged a plan for the progressive replacement of the fleet through manufacturers of national origin.

It was decided for Chincul SACAIFI to manufacture aircraft under license from Piper Aircraft Corporation. The company was a wholly owned subsidiary of “La Macarena S.A.”, Piper’s Argentine distributor. Thanks to Piper’s licensed production plan to produce aircraft. abroad, it envisaged assembly in emerging third world countries, with the main benefit of commercial penetration and the reduction of labor costs that this implied.

With industrial promotions, which gave reductions and tax deferrals to certain areas of the country, they took the owners of Chincul to settle in the town of Pocito in the province of San Juan.

There were built two hangars: Endings, and production: 70 m front by 110 m long. Together with other sectors and annexed workshops, the total covered area reached 14,000 sq.m covered.

The inauguration of the plant occurred on December 12, 1972. The plant maintained a simultaneous process with 10 assembly lines, with about 450 employees (between technicians and aeronautical mechanics), working 24 hours a day, 365 days a year “24×7”. In total they produced some 960 aircraft. In 1978 there were 500 employees.

By the middle of the 1980s, the Sanjuanina plant started a slow downward slope due to the inflationary process that was experienced at that time, in addition to the bankruptcy of its Piper Aircraft mother house.

The Cuyano settlement of the Beraza tried to keep the head for a while longer, but 10 years of setbacks prevented it.

Signed agreement with Bell Helicopter Textron 1990 for helicopter co-production.

Finally, between 1991 and 1994, a final series of the PA-18 Super Club model was produced, definitively ceasing the activity on January 31, 1995, the date on which its huge gates were closed at the Pocito plant.

Today the facilities offer the image of a sad abandonment.

Chilton Cavalier

The Chilton Aircraft Ltd Cavalier was a 15m sailplane designed by Chilton in 1944, intended for production at the end of the war.

No flaps, but airbrakes were included. The undercarriage was retractable main wheel, and a tail bumper.

A project only, the glider was not built.

Wingspan: 14.94 m / 49 ft 0 in
Length: 6.86 m / 22 ft 6 in

Chilton DW.1     

DW.1/1A

A single-seat light aircraft designed by Hon Andrew W. H. Dalrymple and A. R. Ward. A low wing open-cockpit wooden monoplane with fixed “trousered” landing gear and Carden-Ford engine, first flown April 1937.

Chilton DW.1 Article

Three D.W.1 s built, followed by one faster D.W.1 A with a 44 hp Train 4.T engine, first flown July 1939.

D.W.1

Gallery

D.W.1
Engine: Carden-Ford, 32 hp
Wing span: 24 ft
Length: 17 ft 6 in
Height: 4 ft 10 in
Empty weight: 398 lb
Loaded weight: 640 lb
MTOW: 700 lb
Max speed: 112 mph
Cruise: 103 mph
ROC: 650 fpm
Range: 500 mi

D.W.1A
Engine: Train 4T, 44 hp.
Max speed: 144 mph.

Chilton Aircraft Co Ltd    

Founded at Chilton, near Hungerford, Berkshire, in 1937 to build D.W.1 single-seat light aircraft designed by Hon Andrew W. H. Dalrymple and A. R. Ward, both former de Havilland students.

A low wing open-cockpit wooden monoplane with fixed “trousered” landing gear and Carden-Ford engine, first flown April 1937. Three D.W.1 s built, followed by one faster D.W.1 A, first flown July 1939. Design of D.W.2 only half finished when Second World War began and it was never completed.

During the war company did subcontract work for MAP and aircraft industry generally. Dalrymple died in a flying accident in December 1945, and company reregistered on June 5,1946 as Chilton Aircraft Company Ltd.

The death of Dalrymple in a flying accident on Christmas Day 1945 brought an end to the aeronautical activities.

Prototype Olympia single-seat sailplane built 1947; rights in this sold to Elliotts of Newbury Ltd. in 1952. Company began work in electrical industry.