Columbia Aircraft Corp / Columbia Airliners Inc

USA
During 1928-1929 produced the Triad high-wing wheel/float amphibian at Valley Stream, Long Island, NY, at which time the company was known as Columbia Airliners Inc. Name changed to Columbia Aircraft Corp and later built 330 Grumman J2F-6 Ducks for the USN. Two Grumman designed XJL-1 (Duck replacement) prototypes were built. The company was taken over in early 1946 as part of the Commonwealth Aircraft Corporation; it went into liquidation in 1948.

Colt Balloons Ltd / Eire Colting Balloons Ltd

Hokan (or Hakan) Colting began building balloons in Ireland with fellow Swede Per Lindstrand in 1976, drawn, like many others, by that country’s abundance of available skilled labor (much of the company’s output went to Sweden). Production of Colt balloons by Eire Colting Balloons Ltd. continued until the company moved to London in 1978, and changed its name to Colt Balloons Ltd. The company had half the staff of a giant like Cameron, but innovated by building many challenging special shapes, and fabricating most of the components itself, Colt made a name as a scrappy player in the industry, not to be underestimated. Resembling Thunder in the ’70s, the two companies merged in 1980. ThunderColt continued production of Colt balloons, bringing the marque’s ultimate output to 99 before production ceased.

Colonial C-1 Skimmer / Colonial C-2 Skimmer IV / Lake Skimmer

C-1 Skimmer prototype

Following World War II, aircraft designer David Thurston, then of Grumman, formed the Colonial Aircraft Corporation as a side job, beginning work on a two/three-seat amphibian, the “Skimmer”. Using some ideas from his previous association with the Gooyear GA-1 Duck and Grumman G-65 Tadpole, Thurston built an all-new amphibian design with a shallower hull and raised turtledeck. Construction on the prototype, called the C-1 Skimmer, began during 1957, powered by a 115 hp Lycoming O-235-C1 with an Aeromatic propeller. 

The all metal hull was semi-monocoque and the fully cantilevered wings joined the fuselage in the high mid-position.

Directly from the G-65 was a tricycle undercarriage retracting system in which the main wheels folded into the wings and one-piece, streamlined stabilising floats. The nose wheel, when retracted, left half of the tire exposed to act as a bumper. Flight control configuration was conventional, with flight surfaces manually actuated, except it appears for hydraulically-actuated flaps; there was a fold-down sea rudder at the base of the air rudder. Access was through a hinge-up front windscreen panel on each side, with side-by-side seating up front and a baggage area behind, which could alternatively handle a second passenger sitting sideways.

C-1 Skimmer

The Skimmer C-1 was a small flying boat of all-metal construction, with mid-mounted wings featuring a noticeable dihedral and fixed fin-style floats. It had a tail with a mid-mounted tailplane, and tricycle landing gear – all gear assemblies with single wheels, the main gear pivoting from the wings in towards the fuselage the nose gear semi-retracting upward into the nose. Ground steering was by differential braking, the nosewheel being free-castoring.

The C-1 prototype, registered N6595K, made its first flight on 17 July 1948 and was further developed over the next six years. The Type Certificate was achieved in September 1955. By that time Thurston had quit Grumman and was working at Colonial full-time. Changes included the installation of a 95 kW / 125 hp Lycoming O-295-D engine.

Production totals of the C-1 Skimmer are given as 22 up to late 1957. It led to the improved “C-2 Skimmer IV” during 1957, which was externally all but identical to the C-1 Skimmer, the primary change being an uprated O-320-A1A engine providing 135 kW (180 HP), permitting a higher maximum takeoff weight, enlarged horizontal tail surfaces, modified wing floats, plus structural strengthening of the wings and pylon for the increased gross weight. It was said to have seats for four, with a cabin redesign. The Type Certificate came in December 1957 and twenty C-2s had been completed at the time Colonial sold its assets, after a series of difficulties and shufflings, to Lake Aircraft Corp in late 1959.

Lake Aircraft Corp marketed the aircraft initially as the Lake Skimmer, and developed the aircraft into the LA4. The initial Lake prototype, the “LA-4P”, very similar to the C-2 Skimmer, performed its initial flight in November 1959; it was followed by two “LA-4A” prototypes in 1960, which featured a 1.22 meter (4 foot) wingspan stretch and structural reinforcement.

A total of 43 (all versions) were built.

C-1 Skimmer
Engine: 125 hp Lycoming O-290-D
Seats: 2-3
Max speed: 125 mph
Cruise: 155 mph
ROC: 700 fpm
Range: 700 mi
Empty weight: 1300 lb
Loaded weight: 1950 lb
Wingspan: 34 ft
Length: 23 ft 6 in
Height: 8 ft 10 in
Wing area: 150.6 sq.ft

C-1 Skimmer
Engine: Lycoming 0-320, 110 kW (150 HP)
Prop: two-bladed Hartzell constant-speed
Wingspan: 10.4 meters (34 ft)
Length: 7.16 m (23 ft 6 in)
Empty weight: 655 kg (1,450 lb)

Type: 2 place civil amphibian
Engine: 1 x 180 hp Lycoming O-360-A5A
Prop: 2 blade Constant speed, metal
Max speed: 135 mph
Cruise speed: 130 mph
Range: 625 miles
Empty weight: 1525 lb
MTOW: 2350 lb
Wingspan: 34 ft 0 in
Length: 23 ft 6 in
Wing area: 170 sq.ft

Colonial Aircraft Corp

Founded as a side venture in 1945 by David B. Thurston, an aeronautical engineer at Grumman, and Herbert P. Lindbad (working at Republic). Colonial built its first aircraft at Long Island, New York, during 1947 and 1948, and after receiving the aircraft’s Type Certificate in 1955, the company moved to a new manufacturing facility in Sanford, Maine.

After Colonial was acquired by Lake Aircraft Corp in 1959, with John F. Strayer as the new President, Thurston left the company while Lindbad stayed on.

Colombes, Ateliers Aeronautiques / AAC

France
Amiot (SECM) company after nationalization; AAC came under control of Junkers during the occupation of France in Second World War and began producing Junkers Ju 52/3m transports for the Luftwaffe. After the war continued building these aircraft under French government contract, designated AAC-1 Toucan. More than 400 produced; when order was completed, factory taken over by Aerocentre-SNCA du Centre.

Colomban MC100 Ban-Bi

Designed by Michel Colomban, the MC 100 Banbi’s plans are available for homebuilders. 2009 Price: 55000 EURO. Construction: Aluminium.

Engine: Rotax 912.
Stall: 46 kt / 53 mph / 86 kmh
Cruise: 140 kt / 162 mph / 260 kmh
VNE: 173 kt / 199 mph / 320 kmh
Empty Weight: 100 kg / 220 lbs
MTOW Weight: 204 kg / 450 lbs
Climb Ratio: 1500 ft/min / 8 m/s
Take-off distance (50ft obstacle): 1310 ft / 400 m
Landing distance (50ft obstacle): 1150 ft / 350 m
Seats: 2.

Engine: Rotax 912 / JPX 4TX75, 80 hp
Wing span: 6.63 m
Wing area: 5.2 sq.m
MAUW: 450 kg
Empty weight: 200 kg
Fuel capacity: 54 lt
Max speed: 305 kph
Cruise speed: 291 kph
Minimum speed: 83 kph
Climb rate: 10.1 m/s
Seats: 2
Fuel consumption: 10 lt/hr