Vickers 246 / G.4/31

Air Ministry Specification G.4/31 called for a General Purpose aircraft, capable of level bombing, army co-operation, dive bombing, reconnaissance, casualty evacuation and torpedo bombing. The Vickers Type 253 won against the Fairey G.4/31, Westland PV-7, Handley Page HP.47, Armstrong Whitworth AW.19, Blackburn B-7, Hawker PV-4 and the Parnell G.4/31.

Designed by Rex Pierson, the Type 246 was the first aircraft built which partly used the Barnes Wallis geodetic design in the fuselage. Despite an order for 150, Vickers offered their private venture monoplane design the Type 253. This used the same geodetic design principles for both the fuselage and the wings, and first flew on 19 June 1935. It had superior performance to the 246 but did not attempt to meet the multi-role requirement, being a day and night bomber only. First flown with PV 0-9 markings, the 253 showed a lower tare weight, better performance and larger payload., partly as a result of the 8.85 – 1 high aspect ratio wing. An initial order for 96 Type 246s was substituted for the Type 253 order.

One prototype, first flown on 6 August 1934. No production.

Engine: 1 x 635hp Bristol Pegasus IIM.3
Max take-off weight: 3791 kg / 8358 lb
Empty weight: 1982 kg / 4370 lb
Wingspan: 16.03 m / 52 ft 7 in
Length: 11.28 m / 36 ft 0 in
Height: 3.81 m / 12 ft 6 in
Wing area: 53.79 sq.m / 578.99 sq ft
Max. speed: 259 km/h / 161 mph
Ceiling: 6614 m / 21700 ft
Crew: 2

Vickers G.4/31

Vickers Valentia

The Valentia was a development of the earlier Victoria troop-carrier, differing by having two 484kW Bristol Pegasus II.L3 or II.M3 engines (the latter for use in India) and an improved landing gear. Accommodation was for a crew of two and 22 troops; lockers were used for equipment and rifle-racks and stretcher supports were provided. Bomb racks could also be fitted if required. Twenty-eight were built as new and 54 Victorias were brought up to this standard.

Engines: 2 x Bristol II M3 Pegasus radials, 464kW / 626 hp
Wingspan: 26.62 m / 87 ft 4 in
Length: 18.14 m / 50 ft 6 in
Height: 5.41 m / 17 ft 9 in
Wing area: 2178 sq.ft / 202.34 sq.m
Max take-off weight: 8845 kg / 19500 lb
Empty weight: 4964 kg / 10944 lb
Wing load: 9.02 lb/sq.ft / 44.0 kg/sq.m
Max. speed: 104 kts / 193 km/h / 120 mph
Service ceiling: 4955 m / 16250 ft
Range: 695 nm / 1287 km / 800 miles
Crew: 2
Bombload: 1000kg

Vickers Valentia

Vickers 207 / M.1/30

Designed by R.K Pierson & Barnes Wallis, the Vickers Type 207 was a single-engined two-seat biplane. Often known as the Vickers M.1/30, for it was built to Air Ministry specification for a carrier based torpedo bomber to replace the Blackburn Ripon. The Air Ministry paid Vickers for a single prototype; its competitors were the Blackburn M.1/30 and the Handley Page H.P.46.

Like Blackburn, Vickers chose the 825 hp (615 kW) Rolls Royce H10 engine, later called the Buzzard IIIMS, a liquid cooled V-12 to power their aircraft. The Type 207 was a single bay biplane, without sweep or stagger and with wings of almost equal span. The upper wing carried Handley Page slots and Frise ailerons; the lower wing alone had dihedral. Both wings used the relatively thick and still novel Raf34 aerofoil section; they folded for storage. The rudder was balanced and the braced tailplane carried aerodynamic servo-assisted elevators operated via trailing edge tabs. Barnes Wallis had recently been appointed chief structural engineer for Vickers aircraft and he brought to the Type 207 new methods of duralumin construction in both wings and fuselage from his previous work on airships. Typically, these structures were complicated but light. The aircraft was fabric covered throughout.

The upper wing was well above the fuselage, braced to it by two pairs of V-form struts on either side; two single struts from the same points on the upper fuselage braced each lower wing. The pilot sat below the wing leading edge and the observer, equipped with a Lewis gun, sat well aft. The split axle undercarriage allowed torpedo dropping from under the aircraft and was fitted with wheel brakes as its ship-borne role required, together with an arrester hook and tail wheel. The Buzzard’s underslung radiator was positioned between the forward undercarriage legs.

The Type 207 flew for the first time on 11 January 1933, with Mutt Summers at the controls. The only notable modification was the addition of 2o of dihedral to the previously flat upper wing. The aircraft but neither of its crew was lost in the first fast diving test on 23 November 1933, when structural breakup was initiated by a tailplane failure. In the end there were no orders for any of the M.1/30 entrants.

Only one was built.

Engine: 1 × Rolls Royce Buzzard IIIMS, 825 hp (615 kW)
Wingspan: 50 ft 0 in (15.24 m)
Length: 43 ft 7 in (13.69 m)
Height: 14 ft 5 in (14.42 m)
Wing area: 724 sq.ft (67.3 sq.m)
Empty weight: 5,200 lb (2,359 kg)
Gross weight: 9,600 lb (4,354 kg)
Maximum speed: at 4,000 ft (1,220 m) 159 mph (256 km/h)
Rate of climb: to 4,000 ft (1,220 m) 800 ft/min (4.1 m/s)
Armament:
1× 0.303 in (7.7 mm) Lewis gun
1×torpedo of a 2000 lb (907 kg) or 1000 lb (453 kg) bomb under fuselage; or 4×500 lb ((227 kg)bombs under inner wings
Crew: 2

Vickers 207 (M.1/30)

Vickers Vincent

The Vincent was a three-seat general-purpose version of the Vildebeest, designed essentially for tropical service in the Middle East and therefore carrying comprehensive equipment. Fitted with a 484kW Bristol Pegasus IIM3 engine, it (like the Vildebeest) had sufficient fuel as standard for a 1000km flight while cruising at 195km/h; this range could be increased to 2000km by the use of an auxiliary fuel tank attached in the position normally occupied by the torpedo. A number of Vildebeests were converted into Vincents and, with new production aircraft, the RAF operated just under 200 from 1934. The last were withdrawn in 1941.

Engine: 1 x 635hp Bristol Pegasus IIM.3
Wingspan: 14.94 m / 49 ft 0 in
Length: 11.18 m / 36 ft 8 in
Height: 5.41 m / 17 ft 9 in
Wing area: 67.63 sq.m / 727.96 sq ft
Max take-off weight: 3677 kg / 8106 lb
Empty weight: 1920 kg / 4233 lb
Wing loading: 11.07 lb/sq.ft / 54.0 kg/sq.m
Max. speed: 124 kts / 229 km/h / 142 mph
Ceiling: 5791 m / 19000 ft
Maximum range: 1086 nm / 2012 km
Range: 543 nm / 1006 km / 625 miles
Crew: 3
Armament: 2 x 7.7mm machine-guns, 8 x 50kg + 8 x 9kg bombs

Vickers Vincent

Vickers 163

The Vickers Type 163 prototype biplane bomber design of the 1930s. It was based on the Vickers 150 Vanox scaled up to take four Rolls-Royce FXIVS 480 hp engines in paired mountings. The engines are mounted in tandem pairs on Y struts between the wings, two engines driving tractor props and two driving pusher props.

It was submitted both as a bomber and as a troop carrier to Air Ministry specifications B.19/27 and C.16/28 respectively first flying on 12 January 1931. As a bomber, the load weighed up to 1361 kilograms, housed in the inner compartment (a maximum of 8 bombs weighing 114 kg) and external hardpoints (up to 4 bombs weighing 114 kg or two 226 kg). Defensive armament consisted of two 7.7-mm machine guns Lewis, mounted on a mobile turret Scraff fore and aft fuselage. The 163 is all metal. Wheel brakes are fitted, and under the tail is a castoring tail wheel.

The aircraft was rejected by the military. In order to fully exploit the potential of the aircraft, it was decided to convert the Type 163 military transport aircraft that meets the specifications C.16 / 28. In this configuration, the aircraft could carry up to 21 soldiers. The machine can be operated as a bomber with a crew of 5, or as a troop carrier, with a crew of 4.

Vickers Type 163 (C.16 / 28)

Only one was produced.

Gallery

Engines: 4 × Rolls Royce FXIVS, 480 hp / 358 kW
Length: 66 ft 9 in / 20.34 m
Wingspan: 90 ft 0 in / 27.4 m
Height: 22 ft 4 in / 6.80 m
Wing area: 1,948 m² / 178 sq.m
Gross vehicle weight: 25,700 lb / 11,700 kg
Maximum speed: 139 kn / 258 kph / 160 mph at 6,500 ft / 1,980 m
Cruising speed: 220 kph
Range: 1,000 NMI / 1850 km / 1,150 mi
Service ceiling: 25,200 ft / 7680 m
Time to 10,000 ft (3,050 m): 18 min 15 sec
Armament: 2 × 0.303 in Lewis Guns
Capacity: up to 12 x 250 lb / 1361 kg bombs / 10 troops
Crew: 4 / 5

Vickers 163

Vickers 161

In the mid ‘twenties, the British Air Ministry found attractive the possibility of the 37mm COW (Coventry Ordnance Works) gun for use against bombers. Accordingly, Specification F.29/27 was issued calling for a single-seat dedicated bomber-interceptor armed with this large and heavy weapon. The specification called for the gun to be mounted in a fixed position to fire forward and upward at an oblique angle of at least 45°. Provision was to be made for oversize and automatically-fed ammunition clips totalling 50 shells, the entire COW gun mechanism had to be easily accessible to the pilot and steadiness as a gun platform was a prime requisite. Vickers submission to this Specification, the Type 161, was extraordinary in that it reverted to the long-abandoned pusher biplane formula with tail surfaces carried by booms. Despite its archaic configuration, however, the Type 161 embodied some advanced features and became the subject of a single-aircraft Air Ministry contract. An unequal-span two-bay biplane with comparatively high aspect ratio wings with duralumin plate and tube structure, it had a metal mono-coque nacelle, accommodating the pilot to port and the COW gun to starboard, which was faired into the upper wing and raised above the lower wing by splayed N-type struts. The 530hp Bristol Jupiter VIIF nine-cylinder radial carried at the rear of the nacelle drove a four-bladed propeller, aft of which was a curious, long tapered cone which, intended to promote directional stability, was supported by struts from the tubular tail-booms and the tailplane. The Type 161 was flown for the first time on 21 January 1931, and after provision of a broader-chord rudder, it flew extremely well, arriving at Martlesham Heath in September 1931 for official evaluation. Development was discontinued when official interest in promoting the quick-firing COW gun lapsed.

Max take-off weight: 1520 kg / 3351 lb
Empty weight: 1080 kg / 2381 lb
Wingspan: 9.75 m / 32 ft 0 in
Length: 7.16 m / 24 ft 6 in
Height: 3.76 m / 12 ft 4 in
Wing area: 25.08 sq.m / 269.96 sq ft
Max. speed: 298 km/h / 185 mph

Vickers 161

Vickers 151 Jockey

During the mid ‘twenties, the Air Ministry accepted the philosophy that the primary concern of the RAF’s fighter element should be interception of intruding enemy bombers. Accordingly, a specification was drawn up for a single-seat day interceptor capable of overtaking an enemy aircraft flying at 241km/h at 6100m. This specification, F.20/27, resulted in contending monoplanes being ordered from de Havilland, Vickers and Westland.

Vickers 151 Jockey Article

The Vickers design, the Type 151, was constructed on Wibault principles, but the rear portion of the fuselage was fabric covered. Power was provided by a nine-cylinder Bristol Mercury IIA radial engine rated at 480hp at 3960m, provision was made for an armament of twin 7.7mm Vickers guns, and the manufacturer assigned the appellation of Jockey to the fighter. Among features embodied by the Type 151 was a sideways-hinging engine mounting to ease accessibility for maintenance, all controls, wiring and piping, and even the Constantinesco gun synchronisation equipment hinging without disconnection.

Designed by Rex Pierson and J Bewsher, the Type 151 was flown in April 1930, but oscillation and inadequate torsional rigidity in the rear fuselage were encountered. Various palliatives were applied, such as wing root leading-edge slots to rectify the buffeting that was believed to create the problems, but these proved ineffectual, and in January 1932, when the Mercury IIA gave place to a 530hp Jupiter VIIF, structural redesign of the rear fuselage was undertaken. It was intended to re-engine the Type 151 once more, this time with a Mercury IVS2 supercharged power plant, but, in June 1932, before this change could be made, the fighter failed to recover from a flat spin while undergoing trials at Martlesham Heath. Progressive redesign of the Type 151 was subsequently undertaken as the Jockey II, which, in its definitive form, was submitted to meet Specification F.5/34 as the Venom.

Max take-off weight: 1434 kg / 3161 lb
Empty weight: 1025 kg / 2260 lb
Wingspan: 9.90 m / 33 ft 6 in
Length: 7.01 m / 23 ft 0 in
Height: 2.51 m / 8 ft 3 in
Wing area: 13.93 sq.m / 149.94 sq ft
Max. speed: 351 km/h / 218 mph

Vickers 151 Jockey

Vickers 150 / 195 / 225 Vanox

Initially a private venture, the submission of Vickers design to the Air Ministry coincided with the issuing of Air Ministry specification B.19/27 for a Virginia replacement. Conceived as a biplane powered by the Bristol Jupiter radial engine it was to have much better performance than the Virginia with similar engines.

The B.19/27 specification meant that the Vickers submission would be tested competitively in trials against other manufacturer’s designs. In the redesign to meet the specification, the B.19/27 project took the Virginia Mark X all moving rudder together with an all-moving tailplane. Three designs were submitted in total; two biplanes with Jupiter and geared Bristol Mercury engines respectively and a monoplane version. The Mercury engined design, the Vickers Type 150 was selected by the Ministry for consideration and building, now to be funded by the Ministry, started. Part way through it was agreed that an alternative engine was allowable, the Rolls-Royce F.XIV.

The aircraft was a two-bay biplane of all metal construction, with a biplane tailplane and with the two engines mounted between the wings.

The aircraft flew for the first time on 30 November 1929. Initial testing and evaluation showed that the aircraft had poor handling, being unstable laterally, prone to Dutch roll and to severe flexing of the rear fuselage. It was handed to the RAF in 1932. Following a forced landing it was rebuilt incorporating recommendations made in reports from Ministry test pilots to try to resolve these problems, and was powered by Kestrel III engines. It was then given the name Vickers Vanox by Vickers.

These changes did not solve the aircraft’s handling problems, and the sweepback of the wings was reduced, which resolved the handling problems. The Kestrel engines proved unreliable, and were replaced by more powerful Bristol Pegasus radial engines. In this form, the aircraft was designated the Vickers Type 195 Vanox, and was demonstrated to meet the requirements of specification.

Following further modifications in February 1933 to improve performance, with extended, three bay wings being fitted, it was now designated the Type 255. However, by this time, the competing Handley Page Heyford and Fairey Hendon bombers had already been ordered into production.

The sole Type 255 spent most of its time in Malta (Raf Luqa) and Gozo on bombing trials and W/Ops training. The aircraft did not perform well and was removed from service after 1 year having been superceded by the Handley Page Heyford.

The Vanox did fly again very fleetingly in 1938 taking part in Air Refuelling trials by the Royal Aircraft Establishment in the Mediterranean, being flown for the last time on 7 January 1938.

Specifications:

Type 150
Engines: 2 × Rolls Royce F.XIV, 480 hp (358 kW) each
Length: 60 ft 6 in (18.45 m)
Wingspan: 76 ft 6 in (23.32 m)
Height: 19 ft 3 in (5.87 m)
Wing area: 1,367 ft² (127 m²)
Airfoil: RAF 34
Empty weight: 10,435 lb (4,743 kg)
Loaded weight: 15,400 lb (7,000 kg)
Max. takeoff weight: 16,170 lb (7,350 kg)
Maximum speed: 125 mph (109 kn, 201 km/h)
Range: 920 mi (800 nmi, 1,481 km)
Service ceiling: 23,000 ft (7,000 m)
Wing loading: 11.3 lb/ft² (55.1 kg/m²)
Power/mass: 0.062 hp/lb (0.10 kW/kg)
Climb to 6,500 ft (1,980 m): 19 min 45 sec
Guns: 2 × .303 in (7.7 mm) Lewis Guns
Bombs: Up to 2,200 lb (1,000 kg) of bombs
Crew: 4