Bristol Coanda School / Coanda WO / Coanda Monoplane / Military Monoplane

The Romanian aircraft designer Henri Coandă joined Bristol in January 1912 and his first design for Bristol was a two-seat monoplane trainer, a development of the Bristol Prier Monoplane, controlled by wing warping. The first prototype flew in March 1912.

Several versions of the plane were built from 1912 onwards with both tandem and side-by-side cockpits. Several were purchased by the War Office for use as trainers by the Royal Flying Corps. International purchases were by Italy and Romania.

Henri Coandas’ second monoplane, No. 80, was similar but had side-by-side seats with dual controls. It was built in May 1912 and remained in continuous use as a school machine at Brooklands and Larkhill until crashed by Merriam and Gipps on 26 January 1914.

A series of similar aircraft followed with both tandem and side-by-side cockpits, known as the School Monoplane and the Side by Side Monoplane. The first School and Side by Side monoplanes entered service with flying schools operated by Bristol at Larkhill and Brooklands.

The two Competition Monoplanes were bought by the War Office after the Military Aircraft Competition, being used as trainers for the RFC. However, on 10 September 1912, one of the Competition Monoplanes crashed, killing Lieutenants Edward Hotchkiss and Claude Bettington. While this was traced to one of the bracing wires becoming detached, it resulted in a five-month ban of flying of all monoplanes by the military wing of the RFC.

Despite this ban, Military Monoplanes were purchased by Romania and Italy, with a production license being granted to Caproni (although this license was later cancelled, only two being built by Caproni). One tandem and two side-by-side machines were sold to Italy, with four tandem and three side-by-side aircraft being sold to Romania.

A more powerful derivative was built for a competition to provide aircraft for the British War Office. Two aircraft, known as Competition Monoplanes were built and entered into the competition, together with two Bristol Gordon England biplanes. The aircraft were flown by Harry Busteed, Bristol’s test pilot and James Valentine.

These did well in the competition, rated equal fifth and were described at the time as “well-designed and well-constructed” though criticised as “heavy for the wing area” and lacking in power. This resulted in their being purchased by the War Office for use as trainers by the Royal Flying Corps. These two aircraft formed the basis for a revised military trainer, the Military Monoplane, which had increased wingspan.

One example of the 37 built survives in the Gianni Caproni Museum of Aeronautics, Trento, Italy, being the oldest surviving Bristol aircraft still in existence. This aircraft was a pattern aircraft sent to Caproni as a basis for their licensed production, never being flown, but was restored to a complete example for display at the museum. The Military Monoplane later formed the basis for the Bristol TB.8, several being rebuilt into TB8s.

There is a monument in Wolvercote, Oxfordshire to Lieutenants Edward Hotchkiss and Claude Bettington, killed in a Bristol Coanda crash in 1912. The crash of a Coanda Military Monoplane on 10th September, 1912, at Wolvercote, Oxford, in which Lts. C. A. Bettington and E. Hotchkiss were killed, was responsible for the decision of the War Office to ban the use of all monoplanes in the Military Wing of the R.F.C. after several fatal accidents had occurred also with other types of monoplane.

A couple of dozens were built and exported to Bulgaria, Germany, Italy and Roumania. No. 150, one of the three sent to the Deutsche Bristol Werke, at Halberstadt in April 1913.

Variants:

School Monoplane
Trainer aircraft with tandem cockpits. Powered by 50 hp (40 kW) Gnome engine. Six built.

Side by Side Monoplane
Trainer aircraft with side-by-side cockpit. Powered by 50 hp (40 kW) Gnome engine. Six built.

Competition Monoplane
Two aircraft built for War Office Military Aeroplane Competition. Powered by 80 hp (60 kW) Gnome engine.

Daimler Monoplane
Single aircraft powered by 70 hp (50 kW) Daimler engine. Overweight and unsuccessful.

Coanda School
Engine: 1 x 50hp Gnome
Take-off weight: 499 kg / 1100 lb
Empty weight: 350 kg / 772 lb
Wingspan: 12.19 m / 39 ft 12 in
Length: 8.23 m / 27 ft 0 in
Height: 2.13 m / 6 ft 12 in
Wing area: 25.55 sq.m / 275.02 sq ft
Max. speed: 105 km/h / 65 mph

Military Monoplane
Improved development of Competition Monoplane with increased wingspan.
Powered by 80 hp (60 kW) Gnome engine.
21 built.

Military Monoplane
Engine: 1 × Gnome Rotary, 80 hp
Wingspan: 37 ft 8 in (11.48 m)
Length: 29 ft 3 in (8.92 m)
Wing area: 450 ft² (41.8 m²)
Empty weight: 970lb (441 kg)
Max. takeoff weight: 1,665 lb (757 kg)
Maximum speed: 56–61 knots (65–70 mph, 105–113 km/h)
Endurance: 5 hours
Climb to 3000 ft (915 m): 11 min
Armament: Some with a 7.92mm machine gun
Bombload: 12 x 10 lb (4.5 kg) light bombs
Crew: two

Military Monoplane
Engine: Gnôme 80ps, 79 hp
Length: 27.067 ft / 8.25 m
Height: 9.022 ft / 2.75 m
Wingspan: 41.995 ft / 12.8 m
Wing area: 279.864 sq.ft / 26.0 sq.m
Max take off weight: 1323.0 lb / 600.0 kg
Weight empty: 771.8 lb / 350.0 kg
Max. weight carried: 551.3 lb / 250.0 kg
Max. speed: 62 kts / 114 km/h
Cruising speed: 54 kts / 100 km/h
Wing load: 4.72 lb/sq.ft / 23.0 kg/sq.m
Range: 130 nm / 240 km
Crew: 2

Bristol Prier P.1

The 1911 P1 monoplane, designed by Prier, Dickson and Coanda, was built as single- or two- seaters, and with various dimensions; Span: 30’2″, 32’9″, 34′, 35’6″ Length: 24’6″, 27′.

A reconnaissance version was exhibited at the Salon de l’Aeronautique at Paris in December 1911, where it was the only British product on show. The type was also used for early wireless experiments.

Australian Mr Busteed flying the Bristol Monoplane in 1911

Gallery

Prier P-1
Engine: 1 x 50hp Gnome
Take-off weight: 372 kg / 820 lb
Empty weight: 291 kg / 642 lb
Wingspan: 9.19 m / 30 ft 2 in
Length: 7.47 m / 24 ft 6 in
Height: 2.97 m / 9 ft 9 in
Wing area: 15.42 sq.m / 165.98 sq ft
Max. Speed: 109 km/h / 68 mph
Crew: 1

Bristol Boxkite

After first buying a Zodiac biplane from France, which Bristol proposed to manufacture, they settled on a copy of the Farman III which was a better design and unlike the Zodiac could be made to fly successfully.

George Challenger, the company’s chief engineer at Filton, sfter seeing detailed drawings of the Farman III in Flight magazine, was pretty sure he could build a copy of the plane. A few weeks later, the first copy was constructed, using materials from the partially built Zodiac aeroplanes. The Farman copy is a tractor biplane having its upper and lower planes equal, directly superposed, and connected by 6 struts. The front struts are rigidly braced by cables; the rear ones free for warping. The fuselage is of quadrangular section. The chassis has four wheels.

The Boxkite, as it was named, was first flown on 31 June 1910 by Maurice Edmond at the company’s flying school on Salisbury Plain with a 37kW Gregoire engine and in September 1910 made the first military flight when it was used in a reconnaissance role during Army manoeuvres on Salisbury Plain, which led to the delivery of the first military aircraft as an army co-operation machine in May 1911.

Farman, not surprisingly, sued the British and Colonial Aeroplane Company for patent infringement. However, White was able to show Farman that they had made significant alterations to Farman’s design to improve it… so Farman dropped the suit. The Bristol Boxkite was the first plane to be built in mass quantity, with four purchased by the British War Office in 1911, and others sold to Russia and Australia.

This plane was simply called the No. 7. Best guess is that the initial Zodiac was No. 1, with the five partially-constructed Zodiac‘s taking the numbering up to No. 6.

The first Boxkite, No. 7, used fitted with a Grégoire 50 horsepower motor, but even before its first test flight, they swapped it out for a same output Gnome motor.

Boxkites under construction

For later trials, they put the Grégoire back in.

Boxkite No. 8 used an E.N.V. 50 horsepower motor.

Still, for almost all other aeroplanes, the company supplied the aeroplanes with the 50 horsepower Gnome rotary engine. Each motor was set just above the lower wing upon sturdy wooden beams, which, also held up the pilot and passenger seats up front.

Although early Boxkite examples built had equal upper and lower wingspans, later ones had a longer upper wing (known as the Military version).

The No. 9, flown by pilot Robert Loraine in late September of 1910, was the first aeroplane to send a radio signal down to the ground, in Great Britain. Loraine, has his diary noted by the Oxford English Dictionary, as the first written example of the word “joystick” to describe aircraft stick controls.

Within a matter of months of the first flight the company was planning for expansion and mounting its first overseas sales drive. Missions were dispatched to Australia, India and other countries with good results. In November 1910 the first export order was placed by Russia for eight Boxkites and subsequently aircraft were also sold to Sweden, Spain, France, Italy, Turkey, Romania and Bulgaria.

The Boxkite has a rich history in the evolution of military aviation in Australia and was the first official military aircraft built in Australia that was used to train Australia’s military aviators.

A Bristol Boxkite was flown in Australia for the first time on 1 March 1914, when Lieutenant Eric Harrison took one into the air at Point Cook. The airfield was then the home of the Australian Flying Corps (AFC).

M. Jullerot in November 1911

On March 14, 1911, the British War Office ordered four Bristol Boxkites for its planned Air Battalion Royal Engineers—becoming the first production contract for military aircraft for Britain’s armed forces. A second order of four was made later that year, with them all pretty much being used as trainers for would-be pilots.
When WWI broke out, four more were ordered by the British War Office, the last of which was written off in February of 1915, as obsolete. These aeroplanes were used as trainers at the Bristol flying schools at Brooklands and Larkhill, both of which were responsible for giving nearly 50 percent of British pilots their license before WWI.

By the time production of the Boxkite ceased in 1914, the British and Colonial Aeroplane Company had constructed 78 Bristol Boxkite aeroplanes in total, of which 60 were the so-called Military version, one (no. 44) was a Racer version, and one, No. 69, was a an unsuccessful Voisin variant.

Bristol Boxkite‘s No. 73-78 were built at Brislington by the Tramway Company, with all those before it manufactured at the Filton facility.

Three replica aircraft built for the movie Those Magnificent Men In Their Flying Machines. One is at the Bristol City Museum and Art Gallery, another at the Shuttleworth Collection at Bedfordshire, and the third is at the Museum of Australian Army Flying in Australia.

Wills’s Aviation Card #51 – “Bristol” Military Biplane.

Card #51 of 75, W.D.& H.O Wills, Aviation series 1911, Vice Regal Mixture issue

This card shows the Bristol Biplane (official name), though the Wills’s card calls it the Bristol Military Biplane, and the world seems to refer to it as the Bristol Boxkite.

Replica:
RAAF Museum Bristol Boxkite
Miles Bristol Boxkite

Gallery

Bristol Boxkite
Length: 38.386 ft / 11.7 m
Height: 10.827 ft / 3.3 m
Wingspan: 46.49 ft / 14.17 m
Max take off weight: 1151.0 lb / 522.0 kg
Empty weight: 363 kg / 800 lb
Max. speed: 35 kts / 65 km/h
Engine: Gnôme, 50 hp
Crew: 2

Bristol Boxkite
Engine: Gnôme, 80 hp
Wingspan: 11.3 m
Wing area: 40 sq. m
Max. speed: 80 km/h

Boxkite Standard
Engine: Gnôme, 50 hp
Wingspan: 10.52 m / 34 ft 6 in
Length: 11.73 m / 38 ft 6 in
Height: 11 ft 10 in / 3.61 m
Empty weight: 363 kg / 800 lb
Wing area: 42.46 sq.m / 457.04 sq ft
Max. speed: 64 km/h / 40 mph

Bristol Boxkite Military version
Engine: 1 × Gnome Omega, 50 horsepower (37 kW)
Wingspan: 14.17 meters (46 feet 6 inches)
Wing area: 48.03 square meters (517.0 square feet)
Length: 11.73 meters (38 feet 6 inches)
Height: 3.61 meters (11 feet 0 inches)
Empty weight: 408 kilograms (900 pounds)
Maximum takeoff weight: 522 kilograms (1150 pounds)
Maximum speed: 64 kilometers per hour (40 miles per hour)
Wing loading: 10.9 kilograms per square meters (2.22 pounds per square foot)
Power/mass: 70.9 watts per kilogram (0.043 horsepower per pound)
Crew: 2

Bristol / British & Colonial Aeroplane Company Ltd

In 1910 Sir George White, the wealthy owner of the Bristol Tramways Company, formed the Bristol and Colonial Aeroplane Company Ltd. With head offices in Bristol and a factory at nearby Filton, the aircraft produced by the company were generally known as ‘Bristols’.

Bristol Article

Founded at Bristol, Somerset, in February 1910 as British & Colonial Aeroplane Company Ltd, a factory was set up in two sheds in the village of Filton in south Gloucestershire, just north of Bristol. Sir George White was a wealthy Bristol businessman and his company was registered on 19 February 1910 with a capital of £25,000.
First began construction of a number of biplanes under license from Societe Zodiac, but these were not completed because the sample aircraft bought from France could not be induced to take to the air.

First aircraft produced were Bristol biplanes, usually known as the Boxkite, which initially were little more than copies of the Henry Farman biplane. The first of these, the Boxkite, was based on a Henri Farman design. The Boxkite made its debut at the Third International Aero Exhibition in 1911 and went on to become the first commercially produced aircraft in Britain with two per week rolling out of the factory. It was sold to the British and Russian military as well as being exported throughout the British Empire.

Flying schools established at Larkhill, on Salisbury Plain, and at Brooklands, Surrey, 1911. February 1911 Deutsche Bristol-Werke established at Halberstadt, Germany, to operate a flying school and build Bristol airplanes; arrangement canceled June 23,1914.

First military aircraft were monoplanes designed by Henri Coanda; No. 105 shared third place with a Deperdussin in the Military Aeroplane Competition of 1912. Bristol Scout, or “Baby Biplane”, evolved by Frank Barnwell 1914. The two-seat Bristol Fighter entered service in 1917 and became regarded as the best general-purpose combat aircraft of the First World War.
During the final year of the war the company produced 2,000 aeroplanes from its own factories. By the Armistice the payroll had risen from 200 in August 1914 to 3,000 and the original tram sheds were now part of a factory with eight acres of floor space.
Following the acquisition of the Cosmos Engineering Company in 1920, the Bristol Company was also a major builder of aero engines.
Renamed the Bristol Aeroplane Company on 9 February 1920. Problems of readjustment and survival were intensified by the general world wide economic depression that succeeded the brief postwar boom. Diversification was one of the expedients adopted to keep the nucleus of the skilled workfiorce in being at Filton. Aircraft manufacture was augmented by produc¬tion of bus and coach bodies and later of motor car bodies.
Between the wars Bristol Bulldog biplanes had equipped nine RAF Squadrons by 1932 and were most widely used fighter until 1936.
In 1935, Bristol’s directors, realising that the company’s capital resources were inadequate, resolved on 15 June to re organise the firm as a public limited liability company with a share capital of £1.2million.
Bristol Type 138A of 1936 captured world altitude record in September, 1936, then regained it from Italy in June 1937 with an altitude of 16,440m. Bristol Type 142, built as executive aircraft for Lord Rothermere, became the military Blenheim, an important light bomber in the early Second World War period. Beaufighter, first flown July 1939, became RAF’s first nightfighter, subsequently an important antishipping aircraft armed with rockets, torpedoes, and bombs.
Designed and built prototype of eight-engined 100- passenger Brabazon I, first flew September 4, 1949; scrapped 1953 for financial/political/technical reasons. Type 170 Freighter first flown December 2, 1945 and 213 built subsequently.
Turboprop powered Britannia first flew August 16, 1952, made the first non-stop airliner flight London, Vancouver (8,208km), June 29, 1957, and first North Atlantic passenger service to be flown by a turbine-powered airliner on December 19 of the same year.
A helicopter department was set up in 1945 as part of the aircraft division at Filton. Austrian born Raoul Hafner headed a research and development team which produced the Type 171 Sycamore. Subsequently entering service with RAF as its first British-designed helicopter in 1952.

1955

In January 1956 the Bristol Aeroplane Company had reorganised into three wholly owned companies; Bristol Aircraft Ltd, Bristol Aero-Engines Ltd, and Bristol Cars Ltd.

September 1957

Four years later Bristol Aircraft Ltd joined with Vickers Ltd and English Electric to become the British Aircraft Corporation.

In 1960 Westland Aircraft took over the Bristol Helicopter Department.

In 1960 Bristol Aircraft Ltd joined with Vickers Ltd and English Electric to become the British Aircraft Corporation.

Bristol Aero Engines (formerly Bristol Engine Company) merged with Armstrong Siddeley Motors in 1959 to form Bristol Siddeley Engines Limited (BSEL) which in turn was taken over by Rolls-Royce in 1966.

Research and development ot the tandem-rotor helicopters resulted in Type 192 Belvedere which entered service with the RAF, in 1961.

On 28 December 1963 the separate companies merged their identities and Bristol Aircraft Ltd became the Filton Division of BAC. Four years later the Bristol title was lost from the engine side when Bristol Siddeley Engines Ltd became the Bristol Engine Division of Rolls Royce Ltd. The nationalisation of the aircraft industry in 1977 resulted in the formation of British Aerospace (BAe) and the works at Filton became part of the Weybridge Bristol Division of BAe Aircraft Group while the BAC Guided Weapons Division at Fillon became part of the Stevenage Bristol Divi¬sion of the BAe Dynamics Group.

Bristol Aero Engines (formerly Bristol Engine Company) merged with Armstrong Siddeley Motors in 1959 to form Bristol Siddeley Engines Limited (BSEL) which in turn was taken over by Rolls-Royce in 1966.

BRM Aero Bristell NG 5

The BRM Aero Bristell is a Czech low-wing, two-seat in side-by-side configuration, single engine in tractor configuration, ultralight and light-sport aircraft that was designed by Milan Bristela and produced by BRM Aero. The aircraft was supplied as a complete ready-to-fly aircraft.

The aircraft was designed to comply with both European microlight rules and also the US light-sport aircraft regulations, by using different versions for each regulatory environment.

The aircraft is made from aluminium and features a 130 cm (51 in) wide cabin at the shoulder, with a bubble canopy over the cockpit. The wings feature flaps. The standard engine is a 60 kW (80 hp) Rotax 912UL, with the 75 kW (101 hp) Rotax 912ULS, the 71 kW (95 hp) ULPower UL260i/iS and the 88 kW (118 hp) ULPower UL350iS powerplants optional. The 115 hp (86 kW) Rotax 914, 85 hp (63 kW) Jabiru 2200 and 120 hp (89 kW) Jabiru 3300 are also available. Other engines are planned, particularly for the United States market. The aircraft has a useful load of 279 kg (615 lb). The landing gear is of tricycle configuration.

The aircraft was introduced at the Aero show held in Friedrichshafen in 2011. After 42 examples had been completed (September 2011) the aircraft was introduced into the US market in September 2011 at the AOPA Summit. The 2011 base price was US$125,000.

Ultralight aeroplane Bristell UL and its modifications Bristell HD, Bristell RG and Bristell LSA are aeroplanes for flight training in flight schools, gliders towing and recreational flying.
The Bristell HD version offers heavy-duty wing spars, and Bristell RG is a version with retractable undercarriage.

The Bristell tricycle-gear (and new taildragger version), low-wing S-LSA comes standard with 10-inch Dynon SkyView or Advance Flight Systems AF5600 EFIS panel, Com, two-axis autopilot, BRS parachute and leather interior. Price 2012: $156,000.

Gallery

Variants:

Bristell UL
Base ultralight model
Engine: 1 × Rotax 912ULS , 75 kW (100 hp)
Wing span: 8,13 m (26 ft 8 in)
Wing area: 10,5 sq.m (113 sq ft)
Wing loading: 45 kg/ sq.m
Length: 6,45 m (21 ft 2 in)
Height: 2,28 m (7 ft 6 in)
Cabin width: 1,3 m
Empty weight: 290 kg (639 lb)
Maximum take-off weight: 472,5 kg (1,042 lb)
Useful load: 182,5 kg
Fuel tanks capacity: 130 lt (29 imp gal; 34 US gal)
Fuselage luggage compartment: 15 kg
Wing luggage compartment: 2 x 20 kg
Load factors: +4/-2g
Stall speed with flaps VSO: 52 km/h
Stall speed without flaps Vs1: 67 km/h
Manoeuvring speed VA: 165 km/h
Maximum flap speed VF: 139 km/h
Cruising speed: 214 km/h 250 km/h
Never exceeded speed VNE: 270 km/h
Seats: 2

Bristell HD
Heavy duty model
Wing span: 8,13 m
Wing area: 10,5 sq.m
Wing loading: 57,1 kg/ sq.m
Length: 6,45 m
Height: 2,28 m
Cabin width: 1,3 m
Empty weight: 310 kg
Maximum take-off weight: 600 kg
Useful load: 290 kg
Fuel tanks capacity: 130 lt
Fuselage luggage compartment: 15 kg
Wing luggage compartment: 2 x 20 kg
Load factors: +4/-2g
Stall speed with flaps VSO: 78 km/h
Stall speed without flaps Vs1: 87 km/h
Manoeuvring speed VA: 165 km/h
Maximum flap speed VF: 139 km/h
Cruising speed: 250 km/h
Never exceeded speed VNE: 290 km/h

Bristell LSA
Model for the US light-sport aircraft category
Wing span: 9,13 m
Wing area: 11,75 sq.m
Wing loading: 51,06 kg/sq.m
Length: 6,45 m
Height: 2,28 m
Cabin width: 1,3 m
Empty weight: 330 kg
Maximum take-off weight: 600 kg
Useful load: 270 kg
Fuel capacity: 130 lt
Fuselage luggage capacity: 15 kg
Wing luggage compartment: 2 x 20 kg
Load factors: +4/-2g
Stall speed with flaps VSO: 58 km/h
Stall speed without flaps Vs1: 74 km/h
Manoeuvring speed VA: 165 km/h
Maximum flap speed VF: 139 km/h
Cruising speed: 250 km/h
Never exceeded speed VNE: 290 km/h

Bristell RG
Rectractable gear model
Wing span: 9,13 m (30.0 ft)
Wing area: 11,75 sq.m
Wing loading: 51,06 kg/ sq.m
Length: 6,45 m
Height: 2,28 m
Cabin width: 1,3 m
Empty weight: 335 kg
Maximum take-off weight: 600 kg (1,323 lb)
Useful load: 265 kg
Fuel tanks capacity: 130 lt
Fuselage luggage compartment: 15 kg
Wing luggage compartment: 2 x 20 kg
Load factors: +4/-2g
Stall speed with flaps VSO: 58 km/h
Stall speed without flaps Vs1: 74 km/h
Manoeuvring speed VA: 165 km/h
Maximum flap speed VF: 139 km/h
Cruising speed: 250 km/h
Never exceeded speed VNE: 290 km/h

Brighton Chitty Bang Bang             

The semi-rigid airship, whose appearance was designed by Ken Adam, was an approximate replica of a 1904 Lebaudy airship for the film Chitty Chitty Bang Bang. It was intended to represent the airship of Baron Bomburst of Vulgaria. Although fictional in inspiration, it was a fully functional flying airship.

Vulgaria, and the airship, is drawn from Roald Dahl’s screenplay for the film, rather than Ian Fleming’s original book.

The airship was built in 1967 by Malcolm Brighton, at Cardington, Bedford. It was only the second British airship to be built post-war, the first being the Airship Club’s 1951 Bournemouth. It was also the first British airship to be mainly filled with helium rather than hydrogen, though it was topped up with hydrogen.

The envelope was symmetrical fore-and-aft and short and deep compared to typical rigid airships, with pointed ends above the centre of the envelope that gave it the distinctive Lebaudy “hooked” appearance. The gondola was a long open truss structure beneath this and a crew basket beneath, with the typical Lebaudy feature of cruciform control surfaces at the rear of the gondola.

The ends of the airship envelope were coloured with bands of the Vulgarian tricolor: black and purple on white. The flanks were adorned with a large black griffin, the arms of Vulgaria.

The envelope was 112 feet long, with a width of 30 feet and height of 44 feet, giving a volume of 37,000 cubic feet (1,000 m3). A single Volkswagen Beetle engine of 40 hp drove two two-bladed propellers. First flying in 1967, the small Lebaudy control surfaces made the airship difficult to control in pitch.

Only the one was ever built.  It first flew, from a farm at Turville Heath, Buckinghamshire, on 9 August 1967.

Lionel Jefferies, one of the films stars.

On one flight by Malcolm Brighton and Derek Piggott the airship collided with two sets of high-voltage power wires, causing much damage. Soon after it was repaired, a freak storm tore the point of attachment of the mooring ropes, destroyed it totally.

Briffaud GB-6

In the Fifties, Georges Briffaud designed the GB-6, a tailless airplane with a high wing and a Lutétia 44 hp engine. Inspired by the work of Abrial and Fauvel, he provided his airplane with an inherently stable wing allowing the horizontal tail to be omitted. The wing, however, had an original airfoil section, based on the NACA 23012, whose inherent stability was achieved by raising the trailing edge. Assembled by SAN (Société Aéronautique Normande), this airplane took off with Lucien Quérey (Director of SAN) at the controls in June 1955, from the Bernay airport. While landing on a wet section of the runway, however, the nosewheel dug in and the GB-6 flipped over violently. The pilot was only slightly injured.
Only the wing was salvageable.

Brewster 229 / 339 Buffalo / F2A

Brewster Buffalo Article

The prototype of this single-seat all-metal fighter flew for the first time in December 1937.

1938 XF2A-1

The first production version was the F2A-1 powered by a 700.4kW Wright R-1820-34 radial engine which went into service with the US Navy in 1939. From the initial order of 54, only 11 were actually accepted into service with US forces. The eleven were operated by the US Navy on board USS Saratoga and 44 were exported to Finland. The F2A-1 was the US Navy’s first monoplane fighter.

These were followed by 43 894kW R-1820-40-engined F2A-2 and 108 F2A-3 for the US Navy. Addition of armour plate on the F2A-2 version reduced any performance advantage the basic Buffalo may have had over Japanese fighters.

A contract was placed by the RAF in 1939 for 170 Brewster Model 339’s (called Buffalos) to be operated as a land fighter. Meanwhile a few fighters had reached Belgium and others were in service in the Netherlands East Indies and with the RAF.

Finland bought 44 Brewster 239 from USA 1939-1940. Basically 43 Brewsters were on sale (US Navy order was 54 and only 11 was delivered). But Finland bought 44 and 38 came from US Navy order and six from Belgium order. Since Belgium has ordered Brewster 339, the factory had to make rather big modification to front fuselage.

After the Russian invasion of Finland in 1940, slowly reinforcements began to arrive for the Finnish air force. The first to come were 5 Gloster Gladiators, 12 Hurricanes, 17 Lysanders and 24 Blenheims, all from Britain. After that, 76 Morane-Saulnier and Koolhoven F.K. fighters arrived from France. Italy sent 17 Fiat fighters, Sweden 12 Gloster Gladiators, and the USA 44 Brewster Buffalo, of which however only 5 reached Finland in time. Even the Union of South Africa sent 25 Gloster Gladiators. Pilots and ground personnel from a number of countries also volunteered to assist them.

Apart from the Finnish fighters which fought well against the Russians, F2A were used almost exclusively against the Japanese and in all cases met superior aircraft. Heavy British losses in the Far East led to their withdrawal and US Navy action during the Battle of Midway was equally unsuccessful as 13 out of the 19 available Buffalos were lost to enemy fire.

In an attempt to improve performance against the Japanese Zero, the .50 in mgs were replaced by .303s and the number of rounds reduced to 350. The fuel was restricted to 80 gallons.

A total of more than 500 F2A were built.

In 1939, following requests by the Finnish Embassy in Washington, D.C., a total of forty-four U.S. Brewster F2A-1 “Buffalo” aircraft that were originally intended for the U.S. Navy were diverted at the behest of the U.S. State Department to Finland for use by the Finnish Air Force (FAF) and designated by Brewster as the Model B-239E. They were flown at first during the Winter War of 1939-40 between the Soviet Union and Finland. There they were never referred to as the “Buffalo” by the FAF, but merely “Brewster” or by nicknames such as “Sky Pearl” and “Pearl of the Northern Skies” and “Butt-Walter” (or “Pylly-Walter”) and “American Hardware” (American metal) and “Flying Beer Bottle,” and they received FAF serial numbers BW-351 though BW-394 (“BW” aircraft).

Brewster B-239s over Lake Tikshozero, 1942.

The Finns liked the Buffalo enough to design a version called the Humu (‘Reckless’) with a wooden wing and a Russian engine. It proved unsatisfactory in trials and only a single example was built.

The one Brewster 239 (F2A-1) is in The Aviation Museum of Central Finland in Tikkakoski, Finland. There is also the prototype of VL Humu which is the clone of F2A-1 or 239.

Gallery

Brewster F 2 A Buffalo
Carrier based fighter aircraft 1938
Length: 26.345 ft / 8.03 m
Height: 12.073 ft / 3.68 m
Wingspan: 35.007 ft / 10.67 m
Wing area: 208.929 sqft / 19.41 sq.m
Max take off weight: 7159.6 lb / 3247.0 kg
Weight empty: 4731.9 lb / 2146.0 kg
Max. speed: 279 kts / 517 km/h
Cruising speed: 224 kts / 415 km/h
Service ceiling: 33202 ft / 10120 m
Wing load: 34.24 lbs/sq.ft / 167.00 kg/sq.m
Range: 839 nm / 1553 km
Engine: Wright R 1820-40 Cyclone, 1184 hp
Crew: 1
Armament: 4x cal.50 MG (12,7mm), 2x 45kg Bomb.

F2A-2
Engine: 1100 hp Wright R-1820-40 (G-205A) Cyclone
Wingspan: 35 ft / 10.67 m
Length: 26 ft 4 in / 8 m
Height: 12 ft 1 in / 3.7 m
Empty weight: 4630 lb / 2100 kg
Loaded weight: 7055 lb / 3200 kg
Max speed: 300 mph / 483 km
ROC: 3070 fpm / 935 m/min
Service ceiling: 30,500 ft 9300 m
Range: 650-950 mi / 1045-1530 km
Armament: 4 x mg, 0.30 in, 0.303 in, or 0.50 in

Brewster F2A-3 Buffalo
Length: 26 ft 4 in (8.03m)
Wingspan: 35 ft 0 in (10.67m)
Height: 12 ft 1 in (3.68m)
Wing area: 19.41 sq.m / 208.93 sq ft
Maximum Speed: 321mph (517kmh; 279kts)
Cruise speed: 415 km/h / 258 mph
Maximum Range: 965miles (1,553km)
Rate-of-Climb: 3,070ft/min (936m/min)
Service Ceiling: 33,202ft (10,120m)
Armament:4 x 12.7mm machine guns, 2 x 45-kg bombs
Accommodation: 1
Empty Weight: 4,731lbs (2,146kg)
Maximum Take-Off Weight: 7,158lbs (3,247kg)
Engine: 1 x Wright R-1820-40 cyclone radial piston , 895kW

Brewster XSB2A1 / SB2 Buccaneer / Bermuda

SB2A-4

The US Navy issued a requirement for a new scout/dive bomber aircraft early in 1938. From half a dozen designs submitted, those of Brewster and Curtiss were considered most suitable, both incorporating the new 1700 hp Wright R 2600 Cyclone 14 cylinder two row radial, conforming adequately with the Navy Bureau of Aeronautics specifica¬tion. In January 1939, prototypes of the XSB2A1 (Brewster) and XSWC 1 (Curtiss) were ordered.

First flown on 17 June 1941, this was a mid-wing all-metal monoplane fitted with a 1,267kW Wright Double-Row Cyclone R-2600-8 engine. The prototype was tested with a mock-up powered dorsal turret, but this caused such buffeting that it was abandoned and traditional hand-aimed guns were used instead.

Production deliveries were made to the RAF in 1942 as SB2A-1 (known as Bermuda and quickly relegated to training and target-towing duties), and to the US Navy from 1943 as SB2A-2, -3 and -4; the latter were produced for the Netherlands East Indies but were not delivered and were used instead as trainers. The RAF’s Bermudas lacked the arrester hook and folding wings of the US Navy’s SB2As.

The Bermuda has split flaps which act as dive brakes, reducing the operational diving speed to a maximum of 240 mph.

A total of 750 Buccaneers were built.

Gallery

Brewster SB2A Buccaneer
Engine: Wright R 2600-8 Cyclone, 1677 hp, 1268kW
Length: 39 ft 2 in / 11.94 m
Height: 15 ft 5 in / 4.7 m
Wingspan: 47 ft 0 in / 14.33 m
Wing area: 379.0 sqft / 35.21 sq.m
Max take off weight: 14290.6 lb / 6481.0 kg
Weight empty: 9924.7 lb / 4501.0 kg
Max. speed: 238 kts / 441 km/h / 273 mph
Cruising speed: 140 kts / 259 km/h / 162 mph
Service ceiling: 24902 ft / 7590 m
Wing load: 37.72 lb/sq.ft / 184.00 kg/sq.m
Range: 1456 nm / 2696 km
Crew: 2
Armament: 2x cal.50 MG (12,7mm), 4x cal.303 MG (7,62mm), 454kg Bomb.

Brenning B-Liner

Mr. Orin Z. Brenning started work on his B-Liner push/pull two-seater in 1970 and the aircraft was completed in 1986 with the first flight taking place on 31 July of that year, registered N285TT. The aircraft featured a mixed wood, steel, composites construction and was purely intended for personal use, so no plans/kits were made available.

Engines: two 85hp Continental C85-12
Wingspan: 34ft
Length: 23.667ft
Height: 8.254ft.
Max. speed: 158mph
Cruise: 144mph
ROC: 1,400ft/minute
Ceiling: 13,000ft
Range: 420 miles