Chasle YC-12 Tourbillion

The Tourbillion (Whirlwind) is a single seat, amateur-built, light low-wing plane that comes from France.

Prototype Chasle YC-12 Tourbillion F-PMXQ nearing completion at Beynes 1965

Designed by Yves Chasle in 1964, the wooden prototype F-PMXQ first flew on 9 October 1965.

It is available in several models that differ only in their engine size. Most common is the 65-hp Continental. Airframe construction includes wood and fabric wings and a plywood-covered fuselage structure.

Plans no longer available.

Variants:
YC-12
prototype with Continental A65 engine
YC-121
similar to prototype with enlarged tailfin for limited certification
YC-122
similar to YC-121 but with Continental C90 engine
YC-123
similar to YC-121 but with Potez 4E-20b engine

YC-121
Powerplant: 1 × Continental A65, 48 kW (65 hp)
Propeller: 2-bladed EVRA fixed pitch wooden propeller, 1.75 m (5 ft 9 in) diameter
Wingspan: 6.7 m (22 ft 0 in)
Aspect ratio: 6
Airfoil: NACA Srs.7
Length: 5.95 m (19 ft 6 in)
Empty weight: 285 kg (628 lb)
Max takeoff weight: 432 kg (952 lb)
Fuel capacity: 60.5 l (16.0 US gal; 13.3 imp gal)
Maximum speed: 235 km/h (146 mph, 127 kn) at sea level
Cruise speed: 205 km/h (127 mph, 111 kn) at 70% power
Stall speed: 75 km/h (47 mph, 40 kn)
Range: 800 km (500 mi, 430 nmi)
Rate of climb: 4.6 m/s (910 ft/min)
Wing loading: 57.5 kg/sq.m (11.8 lb/sq ft)
Power/mass: 0.112 kW/kg (0.068 hp/lb
Takeoff run 855 ft
Landing roll 900 ft
Range 500 miles
Crew: 1

Charpentier C-1

In April 1929, French engineer Jean Charpentier deposited a patent for a twin-engine craft he had named ” plane-aile”. This was followed by a second patent in June 1931, for a twin-engine of transport. These machines remained projects, unlike the following C-1, whose prototype was construct. Having obtained an order from the French government, Charpentier began building the C-1 at the Caudron establishments, in Issy-Les-Moulineaux. The craft was powered by three 6-cylinders Hispano-Suiza line of 100 hp, each with a fixed two-bladed propeller. The C-1 was two-seater, each pilot in a separated open cockpit. The C-1 was damaged during taxy tests at Stamps-Mondésir, in October 1933. Repaired, it took off for the first time in January 1935 with the hands of the Poivre staff sergeant, but crashed almost at once. Extensively damaged, it was not rebuilt.

Wing span: 15.00 m
Length: 5.30 m
Wing area: 24.00 sq.m
Max. gross weight: 2000 kg

Charomskiy M-40

The liquid-cooled V-12 turbocharged diesel engine M-40 was a development of the experimental AN-1RTK turbo-supercharged diesel engine that had begun development in the early 1930s. It dropped its predecessor’s supercharger, but added another two E-88 turbochargers and two intercoolers. It failed its State acceptance testing in May 1940, but production began regardless at the Kirov factory in Leningrad which built 58 engines in the first half of 1941. Production ceased in the Fall after a total of 120 engines were finished.

Delivery problems with the Mikulin AM-34FRNV forced the termination of the production of the Petlyakov Pe-8 for lack of suitable engines in 1940, but the M-40 was adapted for use on the Pe-8 in the spring of 1941. However the M-40 tended to “cut out at high altitude because the manually controlled fuel feed depended on a certain engine speed being maintained and it could only be restarted at about 1,500 metres (4,900 ft)”. In August 1941 the M-40s were removed from the few Pe-8s that had received them and placed into storage. In 1944 Factory No. 500 began to disassemble them in order to use their components in the closely related Charomskiy ACh-30B engine.

A boosted version, the M-40F, was tested in the Summer of 1940 and was approved for production the following November, although only a small batch was built in 1941. It was evaluated in a Yermolaev Yer-2 during 1941, but not accepted for use.

Variants:

M-40
main production version

M-40F
boosted version, Power: 1,500 hp (1,100 kW), Weight: 1,200 kg (2,600 lb)

Specifications:
Type: V-12, turbocharged, four-stroke, diesel engine
Bore: 180 mm (7.1 in)
Stroke: 200 mm (7.9 in)
Displacement: 61.04 L (3,725 cu in)
Dry weight: 1,150 kg (2,500 lb)
Turbocharger: 4 x E-88
Fuel type: diesel
Cooling system: liquid-cooled
Power output: 1,250 hp (930 kW)
Compression ratio: 13.5:1

Charomskiy ACh-30 / M-30           

The Charomskiy M-40 was a Soviet turbocharged aircraft diesel engine developed during World War II. It was used in a few Petlyakov Pe-8 heavy bombers until August 1941 when it was removed, because it was unreliable at high altitudes. The engines were stored until 1944 when they were disassembled and their components were used in the closely related Charomskiy ACh-30B.

The Charomskiy ACh-30 was a Soviet liquid-cooled V-12 turbo-supercharged diesel aircraft engine developed during World War II. The initial version was not very satisfactory and it was cancelled when its factory was forced to evacuate in the autumn of 1941. But production was reinitiated in the summer of 1942 and continued until September 1945 to meet the need for an economical engine to power the Soviet long-range bombers like the Petlyakov Pe-8 and the Yermolayev Yer-2.

The ACh-30 was a development of the experimental AN-1RTK turbo-supercharged diesel engine that had begun development in the early 1930s. It was initially designated as the AD-5 when development began in the sharashka attached to Factory (Zavod) No. 82 at Tushino Airport in 1939. Construction of the first five prototypes began at the end of that year and it passed its tests in early 1940. Preparations to begin series manufacture at Factory No. 82 began in May 1940, but actual production was delayed until 1941 when forty-four were built as the M-30. Production was planned to be transferred to the Kharkov Tractor Factory, but this was cancelled before any engines were built. The M-30 had proven to be unsatisfactory in service, as it was unreliable and troublesome at high altitudes and in cold conditions. Specific problems were its failure to deliver full rpms and it suffered from oil blowouts and failures of the oil pumps. Therefore production was cancelled when Factory No. 82 was forced to evacuate in the fall of 1941 because of the German advance on Moscow.

Production was reinitiated in the evacuated workshops of Factory No. 82 by Factory No. 500 in June 1942, thirty-two engines being completed during the year. Development of supercharged versions began about the same time, using geared, centrifugal type superchargers adapted from the Mikulin AM-38 and the Klimov M-105 engines with intercoolers. That from the AM-38 was more successful and was put into production as the M-30B. Thirty-five incomplete M-30 engines were modified beginning in August into M-30Bs and then thirty-four M-30Bs were produced during the rest of 1942. Oddly the ACh-30B, as the engine was now known, was not formally accepted for series production until 19 June 1943, but production had begun quite a bit earlier than that. Factory No. 45 began production in the fourth quarter of 1943. Some 1450 ACh-30Bs were built before production ended at both factories in September 1945.

The ACh-30B was tested as a motorjet where the jet engine’s compressor was driven by the piston engine’s turbochargers. It was bench tested from June 1944 through May 1945, but was never installed in any aircraft. The jet engine’s thrust was 1,925 lbf (8.56 kN) and the equivalent horsepower of the combination was 4,500 hp (3,400 kW). The combination weighed 1,700 kg (3,700 lb).

Versions of the ACh-30 were evaluated on the Ilyushin Il-6 and the ANT-67, a long-range version of the Tupolev Tu-2, but neither aircraft was put into production. It was also proposed for use on the Tupolev Tu-8S and the MN executive transport, but neither of those projects progressed past design proposal stage.

Variants:
AD-5, M-30, ACh-30
four turbochargers, but no supercharger. Weight: 1,200 kg (2,600 lb), Power: 1,500 hp (1,100 kW), approximately 76 built.

M-30F
1942 prototype. Power: 1,750 hp (1,300 kW)

M-30B, ACh-30B
main production variant, 1450 built.

M-30D
Boosted version for an attack aircraft with 2,000 hp (1,500 kW). Factory No. 500 ordered to develop this version, but no further information is known.

ACh-30BF
Boosted version of the ACh-30B. Weight: 1,280 kg (2,800 lb), Power: 1,900 hp (1,400 kW), 17 built by modifying standard ACh-30Bs.

TD-30B
tank engine – a post-war development that later led to the TD11B tank engine.

Applications:
Petlyakov Pe-8
Yermolayev Yer-2

Specifications:

ACh-30B
Type: V-12, turbo-supercharged, four-stroke, diesel engine
Bore: 180 mm (7.1 in)
Stroke: 200 mm (7.9 in)
Displacement: 61.04 L (3,725 cu in)
Dry weight: 1,290 kg (2,800 lb)
Supercharger: geared, centrifugal type supercharger
Turbocharger: 2 x T1-82
Fuel type: diesel
Cooling system: liquid-cooled
Power output: 1,500 hp (1,100 kW)
Compression ratio: 13.5:1

Changshan Fuerdan Paramotor

Engine: YIWUPROMOTION Power STRONG
Volume: 98.2 cu.cm
Power: 18HP at 9700 rpm
Carburetor: Walbro 32
Thrust: 55KG
Drive Method: Belt-Drive & Gearbox Drive
Start Method: Hand
Oil box volume: 8-10 lt
Engine Oil rate: 3%
Propellers diameter: 115cm, 122cm, 130cm
Oil consumed: 2.1-2.4 lt/hr
Reduction Drive Ratio: 1:3.3
Weight: 11.5 KG
Pilot Max Weight: 90KG
Max flight time: Around 3 hours
Coating of Cylinder Bore: Pottery-Plating Technology

Changhe WZ-10

The CAIC WZ-10 (Changhe Aircraft Industries Corporation / Wuzhuang Zhisheng) is an attack helicopter, with this particular model being produced for use by the People’s Republic of China.
The two crew members sit in tandem with the pilot in the rear and seated higher than his gunner at front. Wing stubs provide the ability for the system to wield munitions of various sorts and center around anti-tank missiles. Additionally the WZ-10 is believed to possess anti-aircraft abilities. Standard armament includes a chin-mounted 23mm cannon.

Power is derived from twin turboshafts centering on the Pratt & Whitney Canada PT6C-67C series. These two engines produce 1,531 horsepower each. The systems drive a five-blade main rotor and a four-blade tail unit. The transmission development is based on help from Agusta Westland. In all, the helicopter is believed to be in the same class as modern systems such as the Denel Rooivalk and Eurocopter Tiger and is slated for operational service beginning 2008.

CAIC WZ-10
Engines: 2 x Pratt & Whitney Canada PT6C-67C turboshaft, 1,531hp
Main rotor: five-blade
Tail rotor: four-blade
Length: 46.26ft (14.1m)
Height: 12.63ft (3.85m)
Maximum Speed: 168mph (270kmh; 146kts)
Maximum Range: 497miles (800km)
Service Ceiling: 19,685ft (6,000m; 3.7miles)
Armament: 1 x 23mm cannon in undernose position
Accommodation: 2
Hardpoints: 4
Empty Weight: 12,214lbs (5,540kg)
Maximum Take-Off Weight: 13,228lbs (6,000kg)

Changhe Zhi-11 / Z-11 / H-11

CHAIG Z-11

Development by Chinese Helicopter R&D Institute began in 1991, the Z-11 (Zhishengji-11 / Vertical take-off aircraft 11) appears identical externally to Eurocopter AS 350B Ecureuil except for nose contours, but CHAIG publicity in mid-2001, stated that “China owns its independent intellectual property rights”. Eurocopter (which sold eight Ecureuils to China in 1996) declines to comment on its provenance.

First details officially released at China Air Show in Zhuhai November 1996, together with photographs showing one or two Z-11s in flight, the quoted first flight date of 22 December 1994 is thought to refer to re-engined modification of two secondhand ex-US AStars (Ecureuils) acquired earlier that year. In early 1997, a Chinese government agency announced that the Z-11 had flown for the first time on 26 December 1996.

Technical appraisal was completed in 1996, and small batch production began in 1997. Test programme included flights totalling 1332km in temperatures from —43 to +6°C, including a 2-hour sortie cruising at -38°C. Design was finalised in December 2000, and the Z-11 received CAAC certification in April 2001. CAAC approval for series production for civilian use was announced on 23 December 2002. Power was one 510kW WZ8D turboshaft (licence-built Turbomeca Arriel ID), reportedly produced by Liming engine factory.

Eight said to have been completed by late 1996, of which four had been delivered. All photographs released before late 1998 showed Z-11 in military camouflage with PLA insignia. One report from Aviation Expo China in October 1997 stated that the PLA had ordered 20 military Z-11s, these apparently going to Army Aviation’s training school. Production amounted to ‘several dozen’ by mid-2001, at which time some 10,000 hours flown and 50,000 take-offs and landings. Chongqing Three Gorges General Aviation Airlines (one ordered) reported as first civil customer in mid-2001; China Central Television of Jiangxi Province received one on 25 August 2002.

An armed version, equipped with cannon, ATMs, unguided rockets and a roof-mounted low-light/infra-red sight, has been reported. Later version to be announced is the Z11-MB1, which made its first flight on 7 Match 2003 powered by a 632kW Turbomeca Arriel 2B1A turboshaft.

CHAIG Z-11
Engine: WZ8D turboshaft, 510kW
Main rotor diameter: 10.69m
Tail rotor diameter: 1.86m
Length overall, rotors turning: 13.01m
Fuselage length: 11.24m
Height over tailfin: 3.02m
Height to top of rotor hub: 3.14m
Empty weight: 1120kg
Max take-off weight: 2200kg
Max level speed: 278km/h
Cruising speed: 240km/h
Hovering ceiling IGE: 5240m
Hovering ceiling OGE: 4500m
Max range: 600km
Endurance: 3 h 54 min

Chargus Titan 38

Two seat side-by-side single engined flex wing aircraft with weight shift control. Wing has floating cross tube construction with single surface; mixture of preformed and flexible ribs. Pilot suspended below wing in trike unit, using bar to control pitch and yaw/roll by altering relative positions of trike unit and wing. Undercarriage has three wheels in tricycle formation; no suspension on any wheels. Push right go left nosewheel steering independent from yaw control. Optional brakes on all wheels. Aluminium tube trike unit, with optional pod. Engine mounted below wing driving pusher propeller. Aluminium tubing to British HT30TF specification, anodised. Howe & Bainbridge Dacron sailcloth. Aircraft quality fasteners.
The Titan 38 is designed largely for tuition, it has a side by side seating position, with the pilot and passenger sitting cross armed so that each has a broad grip of the bar. The bar itself doubles as a full width twist grip throttle.
The hang point incorporates a Rose joint allowing the pilot to yaw the trike unit relative to the wing. Excessive yaw movement is prevented by four bungee shock cords, running fore and aft from each end of the trapeze to the trike unit. While this yaw provision could be useful when attempting a. cross wind landing, for example, it is not universally liked by those who have flown the machine.
The driven wheel of the reduction drive incorporates rubber bushes to absorb torsion¬al vibration; in other respects the power unit is a conventional 440 Robin and is offered with optional electric start. Also optional is an extra fuel tank, which can be located behind the seat. The standard vertical cylindrical tanks, one attached to each pole, hold only 1.2 US gal (1.0 Imp gal, 4.5 litre) each.

Wing span 38.0 ft, 11.58 m.
Nose angle 125 deg.
Total wing area 250 sq.ft, 23.2 sq.m.
Wing aspect ratio 5.8/1.
Nosewheel diameter overall 16 inch, 41 cm.
Main wheels diameter overall 16 inch, 41 cm.
Engine: Robin EC44, 40 hp at 5900 rpm.
Toothed belt reduction, ratio 2.0/1.
Power per unit area 0.16hp/sq.ft, 1.7 hp/sq.m.
Total capacity 2.4 US gal, 2.0 Imp gal, 9.1 litre.
Empty weight 2801b, 127kg.
Max take off weight 616 lb, 279kg.
Payload 3361b, 152kg.
Max wing loading 2.46 lb/sq.ft, 12.0kg/sq.m.
Max power loading 15.4 lb/hp, 7.0kg/hp.
Max level speed >42mph, >68kph.
Never exceed speed 45mph, 72kph.
Cruising speed 38mph, 61 kph.
Stalling speed 25 mph, 40 kph.
Max climb rate at sea level 230ft/min, 1.2m/s.
Range at average cruising speed 30 mile, 49km.