IAR IAR-27

The unnumbered prototype of the IAR 27 trainer made its debut on June 8, 1937. A two-seat basic trainer, low-wing monoplane, metal construction, power was a 180 hp IAR 6 GI (licenced DH Gipsy 6), and a 9.10 m span.

Series production totalled 80 aircraft, 30 built by SET in 1941. The wheel covers were not employed on series production airframes.

IAR IAR-23 / IAR-24

IAR-23

The IAR-23 was created in 1934 by the Romanian company Industria Aeronautică Română (IAR) as an attempt to design a next-generation fighter for the Royal Romanian Air Force, but because its low power, it was classified only as a civilian touring aircraft. However, it contained many advanced features for its time, including uniquely designed wings. After the installation of additional fuel tanks, it turned into a long-haul touring plane, with a maximum range of 2300 km.

IAR-23

The sole IAR-23 built was registered YR-IAR. and delivered to Major G. Bănciulescu in September 1934, who undertook several cross-country flights with the aircraft through Europe (from Bucharest to Warsaw, Prague and Vienna). The next year, the IAR-23 was flown to Tel-Aviv and back.

An improved version, the IAR-24 YR-ACI, was created in 1935. It used the same airframe, but had a modernized cockpit and a slightly more powerful engine that yielded a higher cruising speed.

IAR-24

IAR-23
Powerplant: 1 × Hispano-Suiza 9Qa, 253 kW (340 hp)
Wingspan: 12.00 m (39 ft 4 in)
Wing area: 22.30 m2 (240.00 sq ft)
Length: 8.35 m (27 ft 5 in)
Height: 2.70 m (8 ft 10 in)
Empty weight: 980 kg (2,156 lb)
Gross weight: 1,920 kg (4,224 lb)
Maximum speed: 245 km/h (153 mph, 133 kn)
Cruise speed: 215 km/h (134 mph, 116 kn)
Range: 2,300 km (1,437 mi, 1,249 nmi)
Service ceiling: 4,100 m (13,670 ft)
Crew: 2 pilots
Capacity: 4 passengers

IAR-24
Engine: Gnome-Rhone 7 Kd, 350 hp
Wingspan: 12.00 m
Length: 8.35 m
Height: 2.70 m
Wing area: 22.30 sq.m
Empty weight: 1180 kg
Normal takeoff weight: 2030 kg
Maximum speed: 280 km / h
Cruising speed: 230 km / h
Practical range: 2300 km
Rate of climb: 200 m / min
Service ceiling: 4500 m
Crew: 2

IAR-23

IAR IAR-22

The 1934 CNIAR IAR-22 was a wooden construction, fabric-covered two-seat dual-control trainer/tourer. It has two seats in tandem and a fixed conventional undercarriage.

The wings were built around two spruce box spars, with plywood webs; plywood covered the whole wing except for the fabric trailing edges. In plan, the wings were straight-tapered, with most of the taper on the trailing edge, but with rounded tips. The wing trailing edge carried ailerons but no flaps. The tailplane was also straight-tapered, though with the taper more equally distributed between leading and trailing edges. The elevators were split, with a cut-out for rudder movement, and were horn balanced. The fin was also straight-edged but the broad rudder, also horn balanced, had a curved trailing edge.

The fuselage of the IAR.22 was flat sided, tapering to the rear. It was a Warren truss structure with duralumin gussets; the forward fuselage was plywood covered, the remain fabric clad. Rounded decking, together with a head fairing behind the rear cockpit, gave the aircraft a slightly humped profile. The front cockpit was just behind the leading edge of the wing and the rear one at mid-chord. The nose line dropped slightly over the cowling of the 97 kW (130 hp) de Havilland Gipsy Major engine, an inverted air-cooled inline engine carried on a steel mounting and which drove a two-bladed propeller. The undercarriage had a wide track of over 2.5 m (100 in), with near perpendicular IAR-made shock absorber legs, split axles hinged at the fuselage centre line and trailing struts. The wheels had independent brakes but were not faired in.

It was reported that the IAR.22 “gave very satisfactory results in tests” conducted by the Romanian Air Ministry’s Acceptance Commission but there is no record of its adoption by the Romanian Air Force. The design allowed for engines of up to 225 kW (300 hp) to be fitted: the intention was that it should be suitable for wireless, camera and gunnery training.

Irina Burnaia and Petre Ivanovici with an IAR-22 aircraft, 3 Jan 1935

Engine: 1 × de Havilland Gipsy Major, 97 kW (130 hp)
Propeller: 2-bladed fixed-pitch
Wingspan: 11.53 m (37 ft 10 in)
Wing area: 20.8 m2 (224 sq ft)
Length: 7.52 m (24 ft 8 in)
Height: 2.02 m (6 ft 8 in)
Empty weight: 647 kg (1,426 lb)
Gross weight: 880 kg (1,940 lb)
Maximum speed: 193 km/h (120 mph, 104 kn) at sea level
Stall speed: 73.73 km/h (45.81 mph, 39.81 kn)
Range: 550 km (340 mi, 300 nmi)
Service ceiling: 5,200 m (17,100 ft)
Absolute ceiling: 6,000 m (20,000 ft)
Rate of climb: 3.3 m/s (650 ft/min)
Time to 1,000 m (3,300 ft): 5 minutes 7 seconds
Time to 2,000 m (6,600 ft): 11 minutes 6 seconds
Time to 3,000 m (9,800 ft): 19 minutes 56 seconds
Wing loading: 42.3 kg/m2 (8.7 lb/sq ft)
Power/mass: 0.1103 kW/kg (0.0671 hp/lb)
Crew: 2

IAR IAR.16        

Although evolved in parallel with the I.A.R.15, the I.A.R.16, which flew for the first time in 1934, was the first of Carafoli’s fighters to feature an all-metal structure, this having plywood, fabric and duralumin skinning. It was powered by a 560hp Bristol Mercury IVS.2 nine-cylinder radial enclosed by a Townend ring and carried an armament of two 7.7mm Vickers guns. The I.A.R.16 was not developed further than a single prototype.

Engine: 560hp Bristol Mercury IVS.2 nine-cylinder radial
Take-off weight: 1650 kg
Empty weight: 1224 kg / 2698 lb
Wingspan: 11.70 m / 38 ft 5 in
Length: 7.37 m / 24 ft 2 in
Height: 2.80 m / 9 ft 2 in
Wing area: 20.30 sq.m / 218.51 sq ft
Max. speed: 342 km/h / 213 mph
Armament: two 7.7mm Vickers guns

IAR IAR.15

The I.A.R.15 flew for the first time late in 1933, powered by a 600hp Gnome-Rhone 9Krse nine cylinder radial and carring an armament of two 7.7mm Vickers machine guns. It had a welded steel-tube fuselage covered by duralumin sheet forward and fabric aft, this being mated with a three-piece wing with two duralumin spars, pine and plywood ribs and duralumin sheet skinning for the centre section with fabric covering for the outer panels. A series of five I.A.R.15s was ordered for the Aeronautica Militara, these differing from the prototype primarily in having three-bladed metal propellers in place of the two-bladed wooden unit. The I.A.R.15 established a national altitude record of 11631m in 1936. It was considered inferior to the P.Z.L. P.11 in manoeuvrability, and no further examples were ordered.

Engine: 600hp Gnome-Rhone 9Krse nine cylinder radial
Take-off weight: 1650 kg
Empty weight: 1215 kg / 2679 lb
Wingspan: 11.00 m / 36 ft 1 in
Length: 7.76 m / 25 ft 6 in
Height: 2.70 m / 8 ft 10 in
Wing area: 19.00 sq.m / 204.51 sq ft
Max. speed: 375 km/h / 233 mph
Range: 600 km / 373 miles
Armament: two 7.7mm Vickers machine guns

IAR IAR-14

The Aeronautica Militara selected the P.Z.L. P.11 for the re-equipment of its fighter element in 1934, and a small series of I.A.R.14s was also ordered that year for evaluation purposes. Flown in 1933, the I.A.R.14 was essentially similar to the I.A.R.13, but reverted to the Lorraine 12Eb engine, which had the advantage of being licence-built by I.A.R. The fuselage of the I.A.R.14 was redesigned, the turnover pylon was incorporated in a fairing aft of the cockpit, shorter-span, broad-chord ailerons were introduced, the vertical tail was redesigned and the span of the horizontal surfaces was increased, their inverted Vee type bracing struts giving place to parallel struts. Armament remained a pair of 7.7mm Vickers guns.
The last IAR 14 fighter, No 20, manufactured in series at IAR, made its first flight on September 2, 1939, five years after the order was placed by the Romanian government, and was still flown during the war years.
The twenty I.A.R.14s delivered to the Aeronautica Militara in 1934 were utilised, after service evaluation, in the fighter training role.

Engine: Lorraine 12Eb
Take-off weight: 1540 kg
Empty weight: 1150 kg / 2535 lb
Wingspan: 11.70 m / 38 ft 5 in
Length: 7.32 m / 24 ft 0 in
Height: 2.50 m / 8 ft 2 in
Wing area: 19.80 sq.m / 213.13 sq ft
Max. speed: 294 km/h / 183 mph

IAR IAR.13

Retaining the wings and horizontal tail surfaces of the I.A.R.12, the I.A.R.13, which made its debut in 1933, achieved an aerodynamically cleaner fuselage by replacing the W-configuration Lorraine engine of the earlier prototype with a Vee-twelve type Hispano-Suiza 12Mc of 500hp. The I.A.R.13 was of similar construction to preceding Carafoli-designed fighters, with a wooden fuselage and wing of mixed construction, and proved under test to have a very good performance. However, the Romanian Aeronautica Militara preferred the gulled shoulder-wing arrangement of the P.Z.L. P.11 fighter to the low-wing configuration of the I.A.R. fighters. In 1934, the Polish aircraft was selected for the re-equipment of its fighter element, with licence manufacture to be undertaken by I.A.R. Nevertheless, the Romanian company was to continue with its own fighter development.

Engine: Hispano-Suiza 12Mc, 500hp
Take-off weight: 1530 kg
Wingspan: 11.70 m / 38 ft 5 in
Length: 7.34 m / 24 ft 1 in
Height: 3.50 m / 11 ft 6 in
Wing area: 19.80 sq.m / 213.13 sq ft
Max. speed: 330 km/h / 205 mph

IAR IAR.12

Of similar configuration as the CV-11 and mixed construction, the I.A.R.12, designed by Elie Carafoli, was aerodynamically more advanced than its predecessor, even though heavier and with a lower-powered engine. Flown for the first time in 1932, the I.A.R.12 had a mixed structure of duralumin and Romanian pine. The fuselage was covered by light alloy panels forward and fabric aft of the cockpit, the wings being fabric skinned. The engine was a 450hp Lorraine 12Eb of W type, and armament consisted of two 7.7mm Vickers machine guns. Only one prototype of the I.A.R.12 was built, development continuing with an improved model, the I.A.R.13.

Take-off weight: 1540 kg / 3395 lb
Empty weight: 1150 kg / 2535 lb
Wingspan: 11.70 m / 38 ft 5 in
Length: 7.20 m / 23 ft 7 in
Height: 3.50 m / 11 ft 6 in
Wing area: 19.80 sq.m / 213.13 sq ft
Max. speed: 294 km/h / 183 mph

IAR CV.11

The first original aircraft design produced by the Industria Aeronautica Romana (I.A.R), established in 1925, was the CV-11 single-seat fighter completed and flown, in 1930. Designed by Elie Carafoli and a French engineer, M Virmoux, the CV-11 was of mixed construction and powered by a 600hp 12-cylinder W-type Lorraine 12Fa Courlis engine. Armament was two 7.7mm Vickers machine guns.
After completion of the initial flight test programme, the Lorraine engine was replaced by a 500hp Hispano-Suiza 12Mc 12-cylinder Vee-type and it was tested at Jstres during the first quarter of 1931. It then returned to Romania, where, on 9 December 1931, the CV-11 made an attempt on the 500km closed-circuit speed record. An engine failure necessitated a forced landing in which the pilot, Capt Romeo Popescu, was killed. Further development of the basic design by Carafoli led to the I.A.R.12.

Take-off weight: 1510 kg / 3329 lb
Empty weight: 1100 kg / 2425 lb
Wingspan: 11.50 m / 37 ft 9 in
Length: 6.98 m / 22 ft 11 in
Height: 2.46 m / 8 ft 1 in
Wing area: 18.20 sq.m / 195.90 sq ft
Max. speed: 329 km/h / 204 mph