Developed from the turbine powered SA 360 Dauphin, Aerospatiale’s SA 365 introduced twin turbines and became named Dauphin 2 to indicate this. Aerospatiale flew the prototype (F-WVKE) of the SA 365 Dauphin on 24 January 1975. Certificated by the French Government for VFR, the Dauphin 2 should carry 3,478 pounds of payload at a cruise speed of 143 knots.
Flown on 24 January 1975, the first SA 365C was powered by two 492 kW (660 shp) Turbormeca Arriel engines.

Sud Aviation SA365 Dauphin Article

From the SA.365C model, the AS.365N variant was developed; it looked similar to its predecessor but in fact had 90 per cent new or improved parts. Modifications included extensive use of composite materials for the structure, rotor blades with a different profile, a modified fuselage and a retractable tricycle landing gear.
The SA.366G version was developed at the same time as the AS.365N. Designed in response to an order from the US Coast Guard, it differed primarily in using 590 hp (440 kW) American Avco Lycoming LTS-101 engines. An SA 366 Dauphin prototype first flew on 28 January 1975. For the search and rescue missions for which it is intended, the aircraft has sophisticated avionics equipment by Collins. It has two sliding doors, a rescue hoist and can take three stretchers and four assistants. One of the first civil models set a world speed record on 9 February 1980 by flying non-stop from Paris (heliport) to London at an average of over 294km/h, beating this two days later by a direct flight from Paris (Issy-les-Moulineaux) to London at 321.9km/h.

In 1979 the US Coast Guard ordered 90 SA365G-1s (HH 65A Dolphin) for short range recovery tasks which, though not requiring offensive capabilities means the aircraft must have the latest maritime search and surveillance equipment. These all feature the retractable undercarriage and other new features that distinguish the Dauphin IIN from the original SA 365 Dauphin II.

The HH-65 is based on the Eurocopter Dauphin (AS 365N) but despite its origins in the French-made Aerospatiale/Eurocopter system, the HH-65 Dolphin is produced in the United States by American Eurocopter, Textron Lycoming (turboshaft engines) and Rockwell Collins (electronics). First flight was achieved in 1980 and the system was introduce in whole by 1985. In service in the USCG with some 102 total Dolphins making up the Coast Guard HH-65 force.

The HH-65 design in characterized by her low-set forward cockpit showcasing a smallish pointed nose assembly and a shrouded Fenestron tail section. The undercarriage is fully retractable and is made up of two single-wheeled main landing gears and a double-wheeled nose gear. Engines are mounted hit and above the crew cabin about midway on the design. The body integrates smoothly into a finely contoured empennage that fits a single vertical tail fin (above the Fenestron shroud) and a horizontal tailpane situated.

Power is derived from twin Turbomeca Arriel 2C2-CG turboshaft engines delivering up to 934 shaft horsepower and driving a corrosion-resistant composite four-bladed main rotor. Maximum speed tops 184 miles per hour with a range of 409 miles and a service ceiling of 15,000 feet. The Dolphin sports an empty weight of approximately 6,333lbs and a maximum take-off weight of up to 9,480lbs. Like the main rotor blades, the fuselage and rotor head are both constructed of corrosion-resistant materials for operations over the salty ocean. In fact, this type of composite construction makes up some 75% of the helicopter design.

Crew accommodations onboard a typical HH-65 model include the pilot, co-pilot, flight mechanic/flight engineer and rescue swimmer. Visibility is rated an excellent thanks to heavy use of glazing in the forward, side and top portions of the cockpit. The flight mechanic is afforded a chair which can slide on rails from one cabin side to the other as needed. The original Dolphin paint design featured a red, white and black scheme but this has since been changed to an overall red (still maintaining the black nose and exhaust sections) for easy visual marking from icebreaker vessels. The change in color has also cut off three days to the overhaul time needed for the aircraft.

The Dolphin maintains a distinct operating capability that allows its autopilot system to bring the aircraft to a hover or fly a designated flight pattern without the need for pilot intervention. This obviously frees up the pilots to other mission matters, particularly when having to visibly scan the surface of the ocean for persons or vessels. Deployment for Dolphins usually originates at land bases but Coast Guard Cutters are designed to take on the type.

The HH-65 has since been spawned into four major versions. The initial production model entered service in 1985 as the HH-65A, fitting twin LTS101-750B-2 series turboshaft engines of 735 shaft horsepower each. This was followed in 2001 by the upgraded HH-65B model with its revised avionics suite, twin global positioning integrated systems and two cockpit-mounted multi-function flat displays. If there was a drawback to the Dolphin system up to now, it lay in her Lycoming-brand engines, forcing the USCG to look through other powerplant options available.

The HH-65C’s were essentially A and B production models fitted with twin the French-made Turbomeca Arriel 2C2-CG turboshaft engines of 934 shaft horsepower each. These powerplants were already proven components of the Eurocopter EC155 series and marked an improvement in both efficiency and reliability over the original set of American-made Lycoming (Honeywell) LTS101-750B-2 turboshafts. Other changes to this model included new gearboxes for main rotor and tail, an 11-blade Fenestron tail rotor, an increase to its MTOW (Maximum Take-Off Weight) and a lengthened nose of new equipment. The first post-conversion C-models were made available in late 2004. A- and B-model Dolphins were retrofitted with the new Turbomeca Arriel 2C2-CG turboshafts and brought up to C-model standard, taking on the designation of HH-65C as well.

The MH-65C is a derivative of the HH-61C with an improved transmission, digital autopilot, revised avionics, increase fuel capacity, increased MTOW and a new 10-bladed tail rotor featuring noise reduction. The MH-65C has been used by the US Coast Guard’s Helicopter Interdiction Tactical Squadron (HITRON) “Force from Above” armed helicopters. Based out of Jacksonville and operating with the Department of Homeland Security, these Dolphins are armed aircraft charged with conducting “Airborne Use of Force” sorties in high drug trafficking areas as well as to counter general security threats in American waters. To compliment this new-found role, the MH-65C’s utilized by HITRON field a 7.62mm M240B general purpose machine gun and a 12.7mm Barrett M107CQ anti-materiel rifle. HITRON Dolphins are also used to guide their accompanying “Over The Horizon Cutter Boats” (OTHCB) to the scene of a given crime for possible interception and/or apprehension. MH-65C “HITRON” Dolphins began operations in 2008.

The HH-65 Dolphin replaced the Sikorsky HH-52A Sea Guards then in service with the United States Coast Guard (USCG).

Israel purchased two HH-65s, and in trials operated them from the navy’s fleet of fast patrol craft, plus two HH-65s were used by the US Navy test centre at Patuxent River, Maryland.
Powered by two Avco Lycoming LTS101 engines of 507 kW (680 shp) one was a prototype; two of the first five production aircraft were SA 365Gs, one of which was been flying in France with a production-standard 680 shp Avco-Lycoming LTS101-750AA turboshafts while the other was at the Aerospatiale Helicopter Corp, Grand Prairie, Texas, facility for installation and flight testing of the Rockwell-Collins avionics.
An even bigger contract gained in 1980 by France, was the vast ‘Sawari’ order for military equipment for Saudi Arabia. Part of this comprised 24 SA 365F Dauphin 2 maritime versions, the final 20 being equipped with four AS.15TT anti ship missiles. This anti ship Dauphin, which is in¬tended to compete with the already existing Lynx with Sea Skua missiles, was developed with Saudi funds and has a Thornson CSI` Agrion radar which provides guidance for the AS.15TT, which itself was financed by this contract.
The SA 365K differs considerably by being almost 75 per cent of composite construction, such as Kevlar, The
Nomex and carbonfibre.
A Dauphin AS 365X set a speed record in March 1991 flying a 3km course.
These earlier versions were super¬seded by the standard civilian variant, the SA 365N Dauphin 2 first flying in March 1979, and first seen at the 1979 Paris Air Show and its derivatives, which have a new structure making extensive use of composite materials such as glass¬fibre, Nomex, Kevlar and Rohacell, and with carbon fibre composite in the spars of the rotor blades. The SA 365N also features fully retractable tricycle landing gear, and is one of the fastest of all helicopters, having set many world point to point speed re¬cords including Paris London in 63 mi¬nutes at an average of just over 322 kph (200 mph). The standard AS 365N can accommodate up to 13 passengers. Powerplants are two Turbomecca Arriel 1C1 turboshafts, each rated at 724 shp (540 kW). A naval variant, designated AS 565F, was in production in 1990. Arriel powered military versions of the Dauphin include the AS.15TT-equipped SA.365F for the Saudi Navy, with either an Omera ORB-32 of Thomson-CSF Agrion radar, and the similar but unarmed SA.365F for the Irish Air Corps, fitted with Bendix RDR-L500 search radar and a Crouzet ONS-200A long-range navigation system.
A military development of the Dauphin is the multirole SA.365M Panther. A production standard Panther was demonstrated in April 1986, and was planned to be available for delivery in 1988, followed in 1992 by a further-refined version with full day and night combat capability. The SA.365M has a Turbomeca TM333-1M powerplant, and is based on the standard SA.365N airframe, but makes extensive use of composite materials, in addition to having military features such as armoured crew seats, self-sealing fuel tanks, and cable cutters. Engine exhausts are designed for reduced infrared signature, and armament options include 20mm gun pods, rocket pods, Matra Mistral AAMs, and HOT anti-tank missiles with an associated Viviane roof-mounted sight. In the assault transport role eight to ten troops may be carried.
French certification (VFR, day and night, category A and B) was awarded to the Aerospatiale SA 365N Dauphin IIN on 9 April 1981.

The AS.365N3 with wide 12-passenger fuselage, five-blade main rotor and improved avionics suite, first flew in prototype form on 16 June 1997. It was later redesignated EC-155. Commercial and military sales of the AS 365 Dauphin 2 exceeded 500 aircraft for operators in some 44 countries by 1990. The total also includes production in China as the Harbin Z-9/Z9A, an initial batch of 50 having been due for completion in 1989.

The Harbin Z-9 (Chinese name: Zhishengji-9 / Vertical take-off aircraft 9) are licence-built AS 365N Dauphin 2. A licence agreement (Aerospatiale/CATIC) was signed on 2 July 1980 and the first (French-built) example made the initial acceptance flight in China on 6 February 1982. Chinese parts manufacture began in 1986 for the initial agreed batch of 50, the last of which was delivered in January 1992. The transmission was manufactured by Dongan Engine Manufacturing Company at Harbin, and hubs and tail rotor blades by Baoding Propeller Factory. Production continued under a May 1988 domestic contract. Plans to introduce the Arriel 2C were announced in mid-2001, following delivery of two of these engines in April. The first flight was achieved in September 2001.

A total of 110 (all versions) were reportedly built by mid-2001 and eight H410As were ordered mid-2002 by Far Eastern Leasing Company, China State Oceanic Administration and Zhoushan Civil Aviation Development Company. Most early production was for Chinese armed services (People’s Navy Aviation and Army Aviation each at least 25) and People’s Armed Police (four delivered 12 September 2001). The type entered service with two PLA army groups in January and February 1988 (Beijing and Shenyang Military Regions respectively). The People’s Navy Aviation was believed to use Z-9A for commando transport as well as shipboard communications. Ten were based at the former Royal Air Force airfield at Sek Kong in the third quarter of 1997, following the 1 July handover of Hong Kong by UK. The first export was made in late 2000 (two to Mali Air Force).

Civil models were used for various duties including offshore oil rig support and air ambulance (four stretchers/two seats or two stretchers/five seats). In 1992, Flying Dragon Aviation received two (late production Z-9s, augmenting an Aerospatiale Dauphin) which are operated on behalf of the Ministry of Forestry. Five civil Z-9s ordered by Shenzhen Financial Leasing Company (SFLC) in 2001. One Z-9A was deployed to Arctic regions in mid-1999, on a scientific survey ship.

The multi-role SA 565UA Panther is a military development of the twin-engined SA 365 Dauphin first flown on 29 February 1984. Based on the standard SA.365N1 airframe, the primary changes include more composite materials and armoured crew seats to maximize survivability in combat zones, the introduction of Turbomeca TM333-1M turboshafts with a continuous rating of 751shp, and the provision of equipment to permit the use of armament and to allow for night operations. Fuselage-mounted outriggers can carry air-to-ground weapons such as rocket or gun pods and/or air-to-air Matra Mistral missiles. For the assault role, up to ten troops can be carried, or external freight up to 3,515 lb (1 600 kg). First customer was the Brazilian Army, which had ordered 42.

The SA575-SA is a navalised derivative of the Panther light military helicopter, itself a derivative of the Dauphin.
The AA version can be equipped with pod mounted cannon etc, the MA is a SAR version, and the SA is armed for anti-ship or ASW.
Chile operates four AS 565 MAs fitted with radar warning and Exocet missiles and Saudi Arabia uses AS 565s equipped with the AS.15TT short-range anti-ship missile.
Also licence built by Harbin as the Z-9.

Gallery

Principal versions:
SA.365 Dauphin 2
SA.360 fitted with two 650shp Turbomeca Arriel 1A turboshafts Prot. F-WVKE FF 24 Jan. 1975. Second prot. F-WVKD used for testing retractable u/c.

SA.365C Dauphin 2
Civil production version of SA.365 with 3382kg TOGW.

SA.365C1 Dauphin 2
SA.365C with 667shp Arriel 1A1 turboshafts.

SA.365C2 Dauphin 2
SA.365C with 670shp Arriel 1A2 turboshafts, 3480kg TOGW and modified transmission system.

SA.365N Dauphin 2
SA.365C with retractable tricycle u/c, lengthened cabin with max 11 pax separated from crew, pointed nose, composite rotors new air intakes and redesigned under-floor fuel tanks. 710shp Turbomeca Arriel IC turboshaft, 3977kg TOGW. FF 31 Mar. 1979. Prot. F-WZJD.

SA.365N1 Dauphin 2
SA.365 with 724shp Arriel 1C1 turboshafts, 4076kg TOGW and recontoured lower tail section eliminating ventral fin.

AS.365N2 Dauphin 2
SA-365N with two 763shp Turbomeca Arriel 1C2 turboshafts, new gearbox, 4226kg TOGW.

AS.365N3 Dauphin 2
AS.365N with quiet tail rotor and two Arriel 2C turboshafts. Prot. FF Oct. 1996.

AS.365N4
AS.365N3 with wide 12-passenger fuselage, five-blade main rotor and improved avionics suite. Prot. FF 16 Jun. 1997. Redesignated EC-155.

SA.365F Dauphin 2
Navalised SA.365N for Saudi Arabia etc. With pointed radar nose and either under-nose radar dish or antisubmarine missile system and 700shp Arriel 1M turboshafts. Prot. F-WZJD FF in this form 22 Feb. 1982.

SA.365M Dauphin 2
Army light tactical version of SA.365N1 with 12-troop capacity. Powered by two 913shp Turbomeca TM.333-1M turboshafts. 4077kg TOGW. Prot. F-WZJV FF 29 Feb. 1984. Later named Panther.

Harbin Z-9
Initial Chinese version, equivalent to French AS 365N1 and assembled from French-built kits: 28 completed.

Harbin Z-9A
Follow-on kit-built version, to AS 365N2 standard. Final 22 of first 50 were of this version.

Harbin Z-9A-100
Effectively, prototypes for domestic licence-built version, with WZ8A engines and much increased local manufacture (72.2% of airframe and 91% of engine). Two built; first flight 16 January 1992; flight test programme completed 20 November 1992 after almost 200 flight hours (408 flights); Chinese type approval received 30 December 1992.

Harbin Z-9B
First indigenous production version, based on Z-9A-100. Modified Fenestron with 11 wider-chord, all-composites blades instead of 13 metal blades as in AS 365N1. Principal unarmed PLA version for SAR, artillery direction, EW, troop transport (accommodates eight), communications and other utility duties. Certified also for domestic commercial operations 19 April 2001.

Harbin Z-9C
Version for PLA Naval Air Force, for deployment aboard certain classes of destroyers and frigates; in service by late 2000. Believed to be equivalent to Arriel 2-engined Eurocopter AS 565 Panther, but equipped with Thales HS-12 dipping sonar and KLC-11/J-band (Chinese version of Agrion 15) surface search radar; armament includes two Yu-7 torpedoes or TV-guided C-701 anti-surface vessel missiles.

Harbin WZ-9
Armed (wuzliuang) version (also reported as Z-9W); eight Norinco HJ-8 (Hongjian: Red Arrow) wire-guided anti-tank missiles, twin 12.7mm machine gun or 23mm cannon pods, or twin 57 or 90mm rocket pods, and gyro stabilised, roof-mounted optical sight. First flight thought to have been in early 1989; in production. Export designation Z-9G, available with or without roof-mounted sight.

Harbin H410A
Version with 635kW Arriel 2C (WZ8C) turboshafts for improved ‘hot-and-high’ performance. (Designation signifies 4.10 tonne MTOW.) First flight September 2001; CAAC certification 10 July 2002. Initial orders for eight.

Harbin H425
VIP version of H410A (thus 4.25 tonne MTOW); improvements to rotor system, fuel system and structure (crashworthiness), avionics and interior layout.

AS.365K Panther
SA.365M with 748shp Arriel 1M1 turboshafts. Redesignated AS.565.

X.380 Dauphin
SA.365N with combined composite rotor hub/mast, 5-blade rotor with swept tips, and 837shp Turbomeca Arriel IX turboshafts.

AS.366G / HH-65A Dolphin
Three-seat SA.365N for US Coast Guard short-range recovery tasks with internal stretcher fittings, rescue hoist, pop-out flotation bags etc. 4027kg TOGW. Powered by two 680shp Textron-Lycoming LTS.101-750A-1 turboshafts. Prot. USCG.4101 FF 23 Jul. 1980. Four built.

AS.366G1 Dolphin
Production AS.366G with LTS.101-750B-2 turboshafts and 4036kg TOGW. 92 built.

Specifications:

AS365 Dauphin 2
Engine: 2 x Turbomeca Arriel turboshafts, 650 hp (485 kW)

AS365C Dauphin 2
Engine: 2 x Turbomeca Arriel 1A, 651 / 670 shp
TBO: 2000 hrs
Main rotor: 39.1 ft / 11.68m
Seats: 14
Length: 44.2 ft / 13.29m
Height: 13.2 ft / 3.5m
Max ramp weight: 8490 lb
Max takeoff weight: 8490 lb
Standard empty weight: 4314 lb
Max useful load: 4176 lb
Max landing weight: 8490 lb
Max sling load: 3748 lb
Disc loading: 7.1 lb/sq.ft
Power loading: 6.1 lb/hp
Max usable fuel: 2336 lb
Max rate of climb: 1515 fpm
Service ceiling: 15,000 ft
HIGE: 3445 ft
HOGE: 3445 ft
Max speed: 165 kt
Normal cruise @ 3000 ft: 150 kts
Fuel flow normal cruise: 648 pph
Endurance normal cruise: 3.4 hr
Pax seats: 13

SA 365F Dauphin 2
Engines: 2 x Turbomeca Arriel turboshafts, 710 shp (529 kW)
Max cruise SL (clean): 252 km/h (156 mph)
Max cruise alt. (clean): 259 km/h (161 mph)
Max speed: 280 kph
Fuel cap: 1140 lt
Range (max fuel, SL): 898 km (558 miles)
Endurance (max fuel): 4 hrs 25 min
Endurance (two missiles): 3 hrs 45 min
Endurance (four missiles): 2 hr 45 min
Empty weight: 2141 kg (4,720 lb)
MTOW: 3900 kg (8,598 lb)
No. Blades: 4
Main rotor diameter: 11.93 m (39 ft 1¾ in)
Fuselage length: 12.11 m (39 ft 8¾ in)
Height: 3.99 m (13 ft 1 in)
Main rotor disc area: 111.7 sq.m (1,202.4 sq.ft)
Crew: 2
Pax: 9
Armament: four Aerospatiale AS.15TT radar guided missiles.

SA 366 Dauphin
Engines: 2 x Avco Lycoming LTS 101 turboshafts, 590 hp (440 kW)

SA.366G-l / HH 65A Dolphin
Engine: Lycoming LTS-101

Aerospatiale / Eurocopter HH-65C Dolphin
Engines: 2 x Turbomeca Arriel 2C2 turboshaft, 853shp
Length: 44.29ft (13.5m)
Height: 12.80ft (3.90m)
Maximum Speed: 137mph (220kmh; 119kts)
Maximum Range: 345miles (555km)
Service Ceiling: 7,510ft (2,289m)
Armament HITRON Dolphins:
1 x 7.62mm M240B General Purpose Machine Gun
1 x 12.7mm M107CQ Anti-Materiel Rifle
Accommodation: 4
Empty Weight: 6,173lbs (2,800kg)
Maximum Take-Off Weight: 20,900lbs (9,480kg)

SA.365N2 Dauphin II
Engine: 2 x Turbomeca Arriel 1C2 or 2 x Turbomeca 1M1
Instant pwr: 550 or 570 kW
Rotor dia: 11.9 m
MTOW: 4250 kg
Useful load: 1970 kg
Max cruise: 150 kts
Max range: 880 km
HIGE: 8365 ft
HOGE: 5905 ft
Seats: 14

Aérospatiale SA 365 M Panther
Engine: 2 x Turbomeca TM 333-1M, 672 shp
Length: 39.698 ft / 12.1 m
Height: 13.123 ft / 4.0 m
Rotor diameter: 39.042 ft / 11.9 m
Max take off weight: 9040.5 lb / 4100.0 kg
Weight empty: 5071.5 lb / 2300.0 kg
Max. speed: 148 kt / 275 km/h
Cruising speed: 138 kt / 255 km/h
Initial climb rate: 1574.8 ft/min / 8.0 m/s
Service ceiling: 15420 ft / 4700 m
Range: 421 nm / 780 km
Fuel capacity: 300 gal / 1135 lt
Crew: 2
Payload: 8-10 pax

Harbin Z-9A
Engine: 2 x South Aeroengine Co WZ8A
Instant pwr: 527 kW
Rotor dia: 11.9 m
MTOW: 4100 kg
Empty weight equipped: 2050kg
Payload: 1660 kg
Useful load: 2038 kg
Fuel capacity 1,140 lt / opt. 180 litre aux
Max speed: 159 kts / 315km/h
Max cruise sea level: 153 kts / 280km/h
Max range at 250km/h, standard tanks: 860 km
HIGE: 8530 ft / 2150m
HOGE: 5900 ft / 1150m
Service ceiling: 19,685 ft / 6000m
Max vertical rate of climb: 252m/min
Max forward rate of climb: 396m/min
Crew: 2
Pax: 12

Harbin H410A
Engine: 2 x South Aeroengine Co WZ8C

AS.565 Panther
Engine: 2 x Turbomeca TM333-1M turboshaft, 670kW take-off
Main rotor diameter: 11.94m
Fuselage length: 12.07m
Height: 4.07m
Take-off weight: 4100kg
Cruising speed: 275km/h
HOGE: 2500m
Range: 740km
Crew: 2

AS.565AA Panther
Engine: 2 x Turbomeca Arriel 1M1
Instant pwr: 570 kW
MTOW: 4250 kg
Payload: 1600 kg
Max speed: 147 kts
Max range: 860 km
HIGE: 6726 ft
HOGE: 4101 ft
Crew: 2
Pax: 10

AS.565MA/SA Panther
Engine: 2 x Turbomeca Arriel 1M1
Instant pwr: 558 kW
MTOW: 4250 kg
Payload: 1600 kg
Max speed: 147 kts
Max range: 875 km
HIGE: 2726 ft
HOGE: 4101 ft
Crew: 2
Pax: 10

AS.565SB Panther
Length: 12m
Max speed: 155 kts
ROC: 1338 fpm
Range: 430+ nm
Capacity: 10 pax
Crew: 2

AS.565UA Panther
Engine: 2 x Turbomeca Arriel 1M1
Instant pwr: 570 kW
MTOW: 4255 kg
Payload: 1600 kg
Max speed: 147 kts
Max range: 858 km
HIGE: 6726 ft
HOGE: 4101 ft
Crew: 1
Pax: 10

Eurocopter Panther 800
Engine: 2 x LHTEC T800-800
Instant pwr: 657 kW
MTOW: 4250 kg
Max speed: 143 kts
Max range: 778 km
HOGE: 6500 ft
Crew: 2
Pax: 10

EC-155
Engines: 2 x Arriel 2C.

EC155B 1

The design of the AS.332 commenced in 1974 and the definitive prototype was preceded by a modified Puma, the AS.331, which flew in September 1977 with an uprated transmission driven by two Turbomeca Makila turboshafts. The first AS.332 flew on 13 September 1978 (the prototype designated as the AS 331) and introduced additional changes to improve payload, performance and survivability, and to reduce maintenance.

Changes included a new energy-absorbing landing gear with increased wheel base and track, a lengthened nose section, more efficient fiberglass main and tail rotors, greater fuel capacity, and revised fin and tail plane contours to improve handling. In 1980 a fourth prototype introduced a cabin stretch of 0.76m with two additional windows and up to three more passengers.

Aerospatiale SA330 Puma Article

When development of the SA.330 (then called Alouette IV) and the production of seven test aircraft (two prototypes and five pre-series machines) was authorised by the STAe in June 1963 (the War Ministry allocated 20 million francs), Turmo III free turbines of the same rating were selected in preference to the Bastan powerplant. A full-size mock-up, seen at the Paris Air Show that year, was similar to the final version apart from the shape of the nose. The evaluation aircraft were registered F-ZWWN to F-ZFWT, and the first of them made its maiden flight on 15 April 1965; all of these, plus a sixth pre-series aircraft, were flying by mid-1968, the last on 30 July 1968.

Beginning with the AS 331 prototype, this produced the AS 332A commercial pre-production models followed by the first commercial production examples designated as the AS 332C. Military pre-production models became the AS 332B followed by the initial militarized forms in the AS 332B1. The AS 332 C1 was a dedicated Search & Rescue (SAR) example equipped with six cabin stretchers and a surface search radar. The AS 332F became a militarized anti-submarine and anti-ship variant while the AS 332F1 was a base navalized Super Puma modified to contend with the rigors of the salty ocean environment.

The sixth pre-production aircraft had a different nose, which was standardized on the production aircraft. As a result of the trials programme the SA330 won the approval of the French Army, which ordered 130 (designated SA.330H).

After several trial examples were built the production of the Puma was started in 1968 powered by twin 1115kW Turbomeca Turmo IVC turboshafts and carrying sixteen combat troops at 260kph for a range of 555km. The first deliveries of fifty-four SA 330Bs to the French army took place in 1969, the type becoming operational the following year and the first of forty-eight Westland-built Pumas joining the RAF in 1971.

Thirty of the SA.330B, which is the version for the French ALAT (Army Air Corps), were built from spring 1969.

The SA.330C export version also went into production in 1969.

The SA.330 may carry a 2500kg external sling load or 20 troops and is equipped with a hoist capable of lifting a 175kg load. The SA.330 carries a crew of 2. The main rotor blades fold back for stowage, and all landing wheels retract, but protrude slightly. The fully-articulated main rotor had four extruded aluminum bladesand the anti-torque rotor five-blades.

The last pre-production Puma was modified by Westland for the RAF and after promising tests, a joint production agreement was reached (concluded on 2 April 1968) and Westland Helicopters built 48 SA 330E as the Puma HC.Mk I.

Those which are in British and French military service are powered by two 1,185 shp Turbomeca Turmo IIIC4 turboshaft engines. They can carry a wide variety of cannon, machine‑guns, and mis­siles, or be used to transport up to 20 troops or cargo.

The RAF’s SA.330E Puma HC Mk.1s built by Westland in 1970-71, were assigned to No.33 and 230 Squadrons.

The SA.330F civil version flew in September 1969 powered by 1290shp Turmo lVA engines. It was superseded by the SA.330J, introduced in 1976, and the SA.330L for military use. Both have 1580shp Turmo IVC engines and composite material main rotor blades. The SA.330J has been certified for all-weather operation and has an anti-icing system on both the rotor blades and air intakes.

The SA 330J provides for a standard crew of two on the flight deck, with a toilet and baggage compartment at the rear of the cabin. Equipped with thermal de-icing of the main rotor blades, thermal anti-icing of the tail rotor blades, special intakes and weather radar, the SA 330J, on 25 April 1978, received certification for all-weather operations, including flight in icing conditions.

Aerospatiale went on to build 686 (some sources claim 697) SA 330s (before switching production to the Super Puma in 1981) in successively improved versions for numerous export customers. These included civil operators, especially those in the oilfield support industry once the all-weather capability was available in the SA 330J and L. Between 1970 and 1984, Aerospatiale sold 126 civil models in all.

The SA330 was also assembled in Romania as the CNIAR-330, the first IAR-330H Puma flying on 22 October 1975. In 1977 a licence was granted for the Puma to be built in Romania.

Romania became the sole manufacturer of the Puma helicopter, and had completed 112 by mid-1985, mostly for military use. Romania exported a number of Puma, the military customers included Sudan, which received 12 in 1985. By 1994 IAR had built over 200 and production of the IAR-330L. Despite being a COMECON and Warsaw Pact member, Romania strove for some measure of independence from the USSR. Instead of buying popular Soviet designs, Romania bought a licence to manufacture the French Aérospatiale SA 330 Puma on 30 July 1974. The first licensed helicopter was flown on 22 October 1975 under the designation IAR-330L. Production was at the Industria Aeronautică Română plant at Ghimbav near Brașov.

At least 163 of these helicopters have been built, out of which 104 were assigned to Romania’s military, 2 were retained by the manufacturer and 57 were produced for export (Pakistan, Ivory Coast, United Arab Emirates, Sudan, Ecuador). There is also a search and rescue (SAR) version, fitted with inflatable floats for emergency landing at sea, which has been built in a small batch.

The fuselage of the SA 330 Puma is a conventional all-metal semi-monocoque structure, with the engines mounted externally on top of the fuselage shell and forward of the main rotor assembly. The rotor is driven via a main gearbox, with twin free-wheeling spur gears to combine the outputs of the two turboshaft engines to a single main drive shaft. Should both engines fail the auto-rotating main rotor continues to drive the auxiliary take-offs for the shaft-driven tail rotor, alternator, dual hydraulic pumps, and ventilation fan. The tail boom, which carries the flapping-hinge five-blade tail rotor on the starboard side and a horizontal stabiliser on the port side, is a monocoque continuation of the aft fuselage. Early main rotor blades were of light alloy construction, but those fitted since 1976 are composite units of glassfibre, carbon fibre and honeycomb construction, with anti-abrasion leading edges of stainless steel. The landing gear is of the semi-retracting tricycle type, with twin wheels on each unit, all of which are partly exposed when retracted.
The first SA 330Bs for the French army and air force, and the SA 330Es for the Royal Air Force, were powered by Turmo III C4 turboshaft engines with a take-off rating of 990kW; and the SA330C/H military export versions, first flown in September 1968, had originally 1044kW Turmo IVBs, but from the end of 1973 SA 330H aircraft were equipped with 1174kW Turmo IVC engines which include anti-icing of the engine air intakes. The first SA 330F/G civil versions had Turmo IVA engines of 1070kW as first flown on 26 September 1969 and delivered from the end of 1970; but the SA 330G acquired Turmo IVC engines from the end of 1973; and this is also installed on the SA 330J (civil) and SA 330L (military) helicopters of 1976.

Features:
A four-blade main rotor, with a fully articulated hub and integral rotor brake. Attachment of each blade to its sleeve is by two quick-disconnect pins enabling the blades to be folded back manually. The five-blade tail rotor on the starboard side of the tailboom has flapping hinges only, with mechanical shaft and gear drive. The main gearbox is on top of cabin behind engines, and has two separate inputs from the engines and five reduction stages. Drive to the tail rotor is via shaft and an intermediate angle gearbox, and a right-angle tail rotor gearbox. The hydraulically controlled rotor brake, on the main gearbox, allows the rotor to be stoped 15 seconds after engine shutdown.
Each of the moulded blades is made up of a fibreglass roving spar, a composite fibreglass and carbonfibre fabric skin, with Moltoprene/honeycomb filler. The leading-edge is covered with a stainless steel protective section. The fuselage is an all-metal semi-monocoque structure. Titanium alloy is used under the engines, which are outside the main fuselage shell. The monocoque tailboom supports the tail rotor and a horizontal stabiliser on the port side.
The Messier-Hispano-Bugatti semi-retractable tricycle type landing gear, with twin wheels on each unit retract upward hydraulically into fairings on sides of fuselage and a self-centring nose unit retracts rearward. The wheels have hydraulic differential disc brakes, controlled by foot pedals, and a lever-operated park brake.
The two Turbomeca Turmo IVC turboshaft engines are mounted side by side above cabin forward of the main rotor assembly and separated by a firewall. They are coupled to the main rotor transmission box, with shaft drive to the tail rotor, and form a completely independent system from the fuel tanks up to the main gearbox inputs. Fuel is in four flexible tanks and one auxiliary tank beneath the cargo compartment floor, with a total capacity of 1,544 litres. There is provision for an additional 1,900 litres in four auxiliary ferry tanks to be installed in the cabin. External auxiliary tanks (two of 350 litres each) can be fitted. For long-range missions one or two extra internal tanks of 215 litres each can be fitted in the cabin. Each engine is supplied by a pair of interconnected primary tanks, the lower halves of which have self-sealing walls for protection against small calibre projectiles.
Crew can be one, or two side by side on anti-crash seats on the flight deck, with a jump-seat for third crew member if required. Doors feature on each side of flight deck on later versions. An internal doorway connects the flight deck with folding seat in the doorway for an extra crew member or cargo supervisor. Dual controls standard. Accommodation in main cabin for 16 individually equipped troops (20 in the high-density version), six stretchers and six seated patients, or equivalent freight. The floor is strengthened for cargo-carrying, with lashing points. The main cabin can have jettisonable sliding door on each side or a port-side door with built-in steps and starboard-side door in VIP or airline configuration. A hatch in the floor below the centreline of the main rotor is provided for carrying loads of up to 3,200kg on an internally mounted cargo sling. A fixed or retractable rescue hoist (capacity 275kg) can be mounted externally on the starboard side of the fuselage. The cabin can have a baggage compartment and/or toilet facilities in the rear of cabin.
Two independent hydraulic systems, each 172 bars, are supplied by self-regulating pumps driven by the main gearbox. Three-phase 200V AC electrical power is supplied by two 15 kVA 400Hz alternators driven by the port side intermediate shaft from the main gearbox and available on the ground under the same conditions as the hydraulic ancillary systems. 28.5V 10kW DC power is provided from the AC system by two transformer-rectifiers. A main aircraft battery is used for self-starting and emergency power in flight. De-icing of engines and engine air intakes is by warm air bled from compressor.
The search and rescue version has nose-mounted Bendix RDR 1400 or RCA Primus 40 or 50 search radar, Doppler, and Decca self-contained navigation system, including navigation computer, polar indicator, roller-map display, hover indicator, route mileage indicator and groundspeed and drift indicator.
A wide range of armament can be carried, including side-firing 20mm cannon, axial-firing 7.62mm machine guns, missiles and rockets.

The design of the AS.332 commenced in 1974 and the definitive prototype was preceded by a modified Puma, the AS.331, which flew in September 1977 with an uprated transmission driven by two Turbomeca Makila turboshafts. The first AS.332 flew on 13 September 1978 (the prototype designated as the AS 331) and introduced additional changes to improve payload, performance and survivability, and to reduce maintenance.
Changes included a new energy-absorbing landing gear with increased wheel base and track, a lengthened nose section, more efficient fiberglass main and tail rotors, greater fuel capacity, and revised fin and tail plane contours to improve handling. In 1980 a fourth prototype introduced a cabin stretch of 0.76m with two additional windows and up to three more passengers.

Production began in France in 1981, and is also undertaken by IPTN in Indonesia under license from Aérospatiale. Samco assembling 17 AS.332Ms under licence for the Republic of Singapore Air Force, and CASA planed to assemble 12 AS.332Bs for the Spanish Army in 1988/89, both joining fleets of French-built helicopters. A total of 197 military Super Pumas had been ordered by May 1987.
There are versions of the Super Puma based on short and long fuselage variants.

The short fuselage AS.332B is the standard 23-seat tactical transport military version and the short fuselage AS.332F is a naval variant. The AS.332F features a folding tail-rotor pylon, a deck-landing assistance device, additional corrosion protection, a nose mounted Omera 360 deg scan search radar, and sonar equipment. Anti-ship armament comprises two AM.39 Exocets, six AS.15TT, or a mix of one Exocet and three AS.15TT. The AS.332F can also be configured for search and rescue. The civil equivalent of the AS.332B and F is the AS.332C.
There is a stretched AS.332M 25-seat military transport.
The stretched AS.332L civil version of the AS.332M is in wide use with 34 with Bristow Helicopters, redesignated Tigers to signify equipment differences from the standard AS.332L.

Aérospatiale was devel¬oping the AS.332 Mk.II incorporating advanced rotor systems, including lengthened blades with parabolic tips, an uprated gearbox to allow increased power transmission, and upgraded avionics and equipment. Performance and manoeuvrability improvements over the standard AS.332 are significant, and uprated engines give a better hot/high capability. The first Super Puma Mk.II flew on February 6, 1987.
The 2002 build Eurocopter AS.332L2, a modified Super Puma, had the latest glass cockpit technology with a four¬ axis coupled autopilot for IFR, day/night approaches and SAR search modes. HIF, VHF/FM, UHF and homing devices make up the extra avionics, whilst an Ultraforce 11 FLIR camera is under the nose, a 30 million candela Nitesun on the lower starboard fuselage and a Skyshout system is also installed. A comprehensive set of medical equipment is carried, including a heart monitor and defibrillator.

Externally, the Super Puma shares many of its characteristics with the preceding Puma design. Its engines are mounted forward and high atop the fuselage exhausting outwards above the crew cabin. The engines power a four-bladed composite construction main rotor and five-bladed tail rotor mounted to starboard. The pilot and co-pilot are fitted into a glazed forward-mounted canopy with excellent views in all vital directions. Each pilot is afforded an automobile-style door for easy entry and exit. The fuselage sides are dominated by two large cabin doors (one door to a side) with cabin windows. The undercarriage is full retractable and features two main landing gears (single-wheeled) recessing into low-mounted fuselage side sponsons as well as a nose gear fitting two wheels recessing behind and under the cockpit floor. Like the Puma series before it, the Super Puma features an elevated empennage with a single vertical tail fin and a horizontal tailplane jutting out of the portside of the fin.

The AS 332L first flew on October 10th, 1980, appeared as a new civilian production model and sported a lengthened fuselage for an increase in its cabin space and fuel capacity as well as uprated turboshaft engines. Operations of the type were certified in 1983. The AS 332L1 was a similar model featuring an even more lengthened fuselage containing an airliner-type interior and uprated Makila 1A1 turboshaft engines and made its operational appearance in 1986. The AS 332M became a militarized version of the AS 332L model while the AS 332M1 was a similar militarized AS 332L with a lengthened fuselage.

Indonesian Aerospace (formally IPTN) has license-produced the Super Puma as the NAS 332L1 of which at least 7 were sold to Iran in a 1996 deal.

The AS 332L2 “Super Puma Mk II” was a further civilian-based transport development of the type beginning service in 1993 and featuring a long-fuselage for an extra row of seats. These Super Pumas were also given a spheriflex rotor head with EFIS flight instrumentation as well as longer main rotor blades with parabolic tips and a four-axis Automatic Flight-Control System (AFCS). The cockpit was updated to include four large multi-function LCD screens. Passenger seating is between 19 and 24 persons. A 15-passenger VIP model (Super Puma Mk II VIP) is also available complete with galley and toilet.

The AS 332L1 utilized twin Turbomeca Makila 1A1-series turboshaft engines running at 1,742 shaft horsepower each while the AS 332L2 fitted twin Turbomeca 1A2-series turboshaft engines rated at 1,819 shaft horsepower each. Top speed for the AS 332L1 was 278 kilometers-per-hour with a range of 841 kilometers and a service ceiling of 20,000 feet. Rate-of-climb was listed at 1,618 feet-per-minute. Comparatively, the AS 332L2 operated at a top speed of 278 kilometers-per-hour, a range of 831 kilometers, a service ceiling of 23,622 feet and a rate-of-climb of 1,614 feet-per-minute.

The AS 332L has seen extensive production and use during its run. These are now being replaced by the newer AS 332L2 Super Puma MK II series. Bristow Helicopters acquired no fewer than 31 custom AS 332L’s for its North Sea-based offshore oil rig work. Customizations included folding cabin seats, life rafts, jettisonable cabin doors, IFR instrumentation, de-icing equipment, baggage compartments and North Sea-related navigational aid equipment. These came under the designation of “Tiger” (sometimes called “Super Tigers”).

Following on from the Alpha XH-1 research, Denel comimssioned two Puma helicopters to develop the systems required for the Rooivalk. Puma J1 first flew in 1986 and was the primary avionics, weapons and flight control systems’ test bed. Puma J2 flew shortly afterwards, its primary task being to develop the weapons systems and integrate them with the aircraft and the other on hoard systems. Concurrently two missile tests were conducted: the first studied the effect of missile blast on the tail boom and the other studied the accuracy of the weapons and associated systems.
From the J model Pumas the Rooivalk started to take shape in the form of the initial experimental development model (XDM).
Production of the original Puma totalled over 686.

The Airbus Helicopters H215 (formerly Eurocopter AS332 Super Puma) is a four-bladed, twin-engined, medium-sized, utility helicopter developed and initially produced by French aerospace company Aérospatiale.

Gallery

Versions:

SA.330 Puma / Alouette IV
Medium-lift 20-troop military helicopter with retractable tricycle u/c and four-blade main rotor driven by two 1320shp Turbomeca Turmo III.C4 turboshafts positioned in housing above main cabin. Prot. F-ZWWN FF 14 Apr. 1965. Jointly built by Aerospatiale and Westland. Originally named Alouette IV.

SA.330B
Initial military production version; delivered to ALAT (French Army Air Corps) from 1969; two 984kW Turmo IIIC-4 turboshaft engines. First flown January 1969.

SA 330B Orchidee
Prototype for battlefield surveillance version, fitted with ESB Orchidee 360° radar and datalink system.

SA.330C Puma
Military export version; similar to SA 330B with provision for fixed or retractable undercarriage; some fitted with surveillance radar and flotation gear.

SA 330E / Puma HC.1
Westland-built version for Royal Air Force, designated HC Mk 1. Forty built.

SA.330F
First civil version with 1,070kW Turmo IVA engines. First flown 26 September 1969; French certification 12 October 1970; FAA IFR certification 23 June 1971.

SA 330G
Uprated SA.330F model for civil and military markets; two 1,174kW Turmo IVC engines; composite main rotor blades.

SA.330H
Export version of Puma SA.330G for ALAT and military customers.

SA.330J
Puma SA.330G with composite main rotor blades and higher weights introduced in 1976. Some assembled by IPTN in Indonesia.

SA.330L
Puma SA.330H with composite main rotor blades and higher weights introduced in 1976.

SA.330S Puma
Portuguese SA.330C modified by OGMA with composite main rotor and two 1700shp Turbomeca Makila I turboshafts.

SA.330Z
Puma SA.330 fitted with experimental tail fenestron. Prot F-ZWRR.

IAR.330L Puma
Puma Licence-built in Romania by IAR Brasov with 1588shp Turbomeca Turmo IV-CA turboshafts.

SA.330R / SA.331
Stretched Puma SA.330 used as development aircraft for SA.332 Super Puma with two 1755shp Turbomeca Makila turboshafts and redesigned rotor head. Also known as SA.330R. F-ZWWO First flown on 5 Sept. 1977.

Oryx
Upgraded Puma by Denel (Atlas Aviation) in South Africa. Atlas has conducted the development and production of a variant of the SA 330 Puma helicopter as the Oryx, and development of a modular weapon suite for the Puma helicopter to convert it into a gunship.

Aérospatiale SA 330 Puma
Engine: 2 x Turboméca Turmo III C4, 1302 shp
Length: 46.129 ft / 14.06 m
Height: 13.714 ft / 4.18 m
Rotor diameter: 49.213 ft / 15.0 m
MTOW: 14112.0 lb / 6400.0 kg
Max. speed: 151 kt / 280 km/h
Service ceiling: 15748 ft / 4800 m
Range: 756 nm / 1400 km
Crew: 2+20

SA 330B Puma
Rotor dia: 49 ft 2.5 in /15 m
Max cruise: 169 mph / 272 km/h

SA 330E Puma / HC.1

Engines: 2 x Turbomeca Turmo TS, 1185shp
Rotor dia: 49 ft 2.5 in / 15 m
Length: 59 ft 6.5 in / 18.15 m
Height: 16 ft 10.5 in / 5.14 m
Max TO wt: 14,770 lb / 6700 kg
Max level speed: 169 mph / 272 kph

SA330J Puma
Engines: 2 x Turbomeca Turmo IVC, 1558 shp
TBO: 2000 hrs
Main rotor: 49.5 ft
Seats: 16/22
Length: 59.8 ft
Height: 16.9 ft
Max ramp wt: 16,315 lb
Width: 5.14 m
Standard empty weight: 8358 lb
MTOW: 16,315 lb
Max landing weight: 16,315 lb
Max useful load: 7957 lb
Max sling load: 7715 lb
Disc loading: 8.5 lb/sq.ft
Power loading: 5.2 lb/hp
Max usable fuel: 2734 lb
Max rate of climb: 1200 fpm
Service ceiling: 15,750 ft
Hover in ground effect: 7545 ft
Hover out ground effect: 5580 ft
Max speed: 142 kts
Normal cruise/3000 ft: 128 kt
Fuel flow normal cruise: 1269 pph
Endurance normal cruise: 2 hr

IAR-330H

IAR-330L
Powerplant: 2 × Turboméca Turmo IVC, 1,175 kW (1,576 hp) each
Main rotor diameter: 15.00 m (49 ft 3 in)
Main rotor area: 176.7 m2 (1,902 sq ft)
Length: 18.15 m (59 ft 7 in) (overall), 14.06 m (46 ft 2 in)
Height: 5.14 m (16 ft 10 in)
Empty weight: 3,615 kg (7,970 lb)
Max takeoff weight: 7,400 kg (16,314 lb)
Never exceed speed: 294 km/h (183 mph, 159 kn)
Cruise speed: 271 km/h (168 mph, 146 kn) (max cruise)
Range: 572 km (355 mi, 309 nmi)
Service ceiling: 6,000 m (20,000 ft)
Rate of climb: 9.2 m/s (1,810 ft/min)
Crew: 1–3
Capacity: 16 fully equipped troops

AS 332 Super Puma
Engine: 2 x Turboméca Makila 1A, 1701 shp
Length: 61.45 ft / 18.73 m
Rotor diameter: 49.475 ft / 15.08 m
MTOW: 18411.8 lbs / 8350.0 kg
Range: 342 nm / 634 km
Crew: 2
Payload: 24 Pax / 2722 kg int. / 4500 kg ext.

AS.332B Super Puma
Engine: 2 x Turbomeca Makila 1A1, 1380kW
Installed pwr: 2370 kW
Rotor dia: 15.6 m
Fuselage length: 15.5 m
Height: 4.92m
No. Blades: 4
Empty wt: 4290 kg
MTOW: 9000 kg
Max internal payload: 2722kg
Max external payload: 4500kg
Max speed: 295 kph
Cruising speed: 262km/h
ROC: 530 m/min
Ceiling: 4600 m
HIGE: 2700 m
HOGE: 1600 m
Fuel cap (+aux): 2060 lt (1900 lt)
Range: 635 km
Crew: 2-3
Pax: 20

AS332C Super Puma
Engine: Turbomeca Makila, 1755 shp
TBO: 2000 hrs
Main rotor: 51.1 ft
Seats: 21
Length: 61.4 ft
Height: 16.1 ft
Max ramp weight: 18,080 lb
Max takeoff weight: 18,080 lb
Standard empty weight: 9115 lb
Max useful load: 8965 lb
Max landing weight: 18,080 lb
Max sling load: 9920 lb
Disc loading: 8.8 lb/sq.ft
Power loading: 5.2 lb/hp
Max usable fuel: 4576 lb
Max rate of climb: 1810 fpm
Service ceiling: 15,580 ft
Hover in ground effect: 9840 ft
Max speed: 160 kts
HOGE: 7545 ft
Normal cruise @ 3000 ft: 135 kt
Fuel flow @ normal cruise: 1030 pph
Endurance @ normal cruise: 4.2 hr
First built: 1979

AS.332L1 Super Puma Mk.2
Engine: 2 x Turbomeca Makila 1A1
Instant pwr: 1400 kW
Rotor dia: 15.6 m
MTOW: 8600 kg
Useful load: 4140 kg
Max cruise: 140 kts
Max range: 1216 km
HIGE: 10,170 ft
HOGE: 7545 ft
Service ceiling: 13,450 ft
Seats: 22/26

AS.332L2 Super Puma Mk.2
Engine: 2 x Turbomeca Makila 1A2
Instant pwr: 1573 kW
Rotor dia: 16.2 m
MTOW: 9150 kg
Useful load: 4490 kg
Max cruise: 150 kts
Max range: 1215 km
HIGE: 9414 ft
HOGE: 7382 ft
Seats: 22/28

Oryx Gunship
Engine: 2 x Turbomeca Turmo IV C.
Instant pwr: 1115 kW.
Rotor dia: 15 m.
MTOW: 7400 kg.
Max speed: 140 kts.
Max cruise: 136 kts.
Max range: 348 km.
HOGE: 12,000 ft.
Crew: 2.

Airbus H215
Engine type: 2 x Safran Makila 1A1 Turboshaft
Takeoff power: 1,357 kW / 1,819 shp
One engine inoperative (OEI 2 min 30s): 1,400 kW / 1,877 shp
Hover ceiling IGE: 3.250 m
Hover ceiling OGE: 2,300 m
Recommended cruise speed: 252 Km/hr
Max range with standard fuel tanks at SL: 642 km / 866 km
Max endurance with standard fuel tanks: 772 km / 1,241 km
Max endurance with standard fuel tanks: 3 hr, 19 min / 4 hr, 25 min
Max endurance with SL Aux fuel tanks: 4 hr, 02 min / 6 hr, 35 min
Rotor diameter: 15.60 m
Cabin Internal volume: 11.4 cu.m / 13.4 cu.m
Crew + passengers / troops: 1 or 2 + 17/20 – 1 or 2 +19/22
Max takeoff weight (MTOW): 8,600 kg
Max takeoff with external load: 9,350 kg
Useful load: 4,038 kg / 3,889 kg
Max External load: 4,500 kg
Standard fuel tank capacity: 1,228 kg / 1,613 kg