1991: Afton, Wyoming 83110, USA. 1997-8: Box 1240, 672 S. Washington, Afton, WY 83111, USA 1999 – Aviat Aircraft Inc. P.O. Box 1240 Afton, WY 83110, USA. In 2009 Aviat Aircraft Inc. was located in Afton, Wyoming. Aviat is engaged in the development, manufacture and servicing of sport and utility aircraft sold under the Aviat trade names of Husky A-1A and A-1B, the Pitts Special S-2C, and the Eagle II. The facility, situated two blocks south of the city center, consists primarily of six light manufacturing buildings containing approximately 72,000 square feet of enclosed space on about five acres of land.
c.1994: Aviat Inc of Delaware, subsidiary of White Intl Ltd of Guernsey, Channel Islands, UK.
Dec 1995: Stuart Horn (pres: Aviat) bought the company to continue its operation.
Aviasud Engineering from Fréjus, France developed a 2-seat highwing ULM-aeroplane with push-propeller. Production of the AE-209 Albatros started in 1992, and the Albatros was available with the 2-stroke Rotax 582 or the 4-stroke Rotax 912 engine. The Albatros classique is equipped with a tail wheel; the Albatros tricycle is equipped with a nose wheel or tail wheel. The wings can be folded, which reduces the needed parking space in the hangar.
After Aviasud went defunct, Micronef ULM had the Albatros built under contract in Poland.
The Aviasud AE-206 Mistral was designed by Francois Goethals and Bernard d’Otreppe and developed by Aviasud Engineering in Fréjus, France, was flown first in 1985. A three-axis, tricycle landing gear, microlight biplane powered by a Rotax 532 engine, the Mistral is a side-by-side two-seated ULM (Ultra Light Motorised aircraft) with forward swept wings. Manufactured by Aviasud Industries in Fréjus, France, the first delivery took place in April 1986. Over two hundred have been built in France. The Mistral was manufactured in Brasil under licence by Ultraleger Industria Aeronáutica Ltda. The Mistral remained in production by Ultraleger until 2004. Their Mistral B and C were powered by a 65 hp 2 cylinder, 2 stroke liquid cooled Rotax 582 UL-DCDI engine. On 4 May 1987 a Mistral was flown to the geographic North Pole by Nicolas Hulot. Following the closure of Aviasud, the Mistral was built by Aeriane circa 1998. Almost entirely built in composites, the entire lower wing acts as ailerons.
Aeriane Mistral
Stall: 35 kt / 40 mph / 65 kmh Cruise: 72 kt / 83 mph / 133 kmh VNE: 89 kt / 103 mph / 165 kmh Empty Weight: 215 kg / 474 lbs MTOW Weight: 390 kg / 860 lbs Climb Ratio: 600 ft/min / 3,85 m/s Glide Ratio: 10,8 Take-off distance (50ft obstacle): 620 ft / 190 m Landing distance (50ft obstacle): 1100 ft / 335 m
Aeriane Mistral Empty weight: 215 kg Wing span: 9.4 m Wing area: 16.4 sq.m Fuel capacity: 60 lt Certification: Vz Engine: Rotax 582, 64 hp MAUW: 390 kg Seats: 2 Max speed: 160 kph Cruise speed: 133 kph Minimum speed: 60 kph Climb rate: 3.85 m/s Fuel consumption: 15 lt/hr
Single seat single engined high wing monoplane with conventional three axis control. Wing has swept back leading and trailing edges, and constant chord; conventional tail. Pitch control by fully flying tail; yaw control by fin mounted rudder; roll control by halfspan spoilers; control inputs through stick for pitch/roll and pedals for yaw. Wing braced from above by kingpost and cables, from below by cables; wing profile modified TK7315 McCready; double surface. Undercarriage has three wheels in tricycle formation with additional tailskid; steel spring suspension on nosewheel and glass fibre suspension on main wheels. Push right go right nosewheel steering connected to yaw control. Brake on nosewheel. Glass fibre/polyester fuselage, partially enclosed. Engine mounted below wing driving pusher propeller. Leading edge in stratified glass fibre/epoxy and tail in stratified glass fibre/polyester; fuselage spar bi-directional stratified.
Designed by Frangois Goethals and Bernard d’Otreppe who are both engineers, and laid out with the help of a computer, this Sirocco is a result of the experience acquired with the Libellule and although it is of a similar configuration it is a completely new machine, despite the confusion generated by its initial title of Libellule MkIL It is one of the very few microlights which has undergone a complete flight test programme, both static and in flight, Frangois being a specialist in fluid mechanics and Bernard d’Otreppe in the study of composite structures. Out of this programme has come what they believe is the optimum wing profile for the Sirocco, the TK 7315 from the American Paul McCready, with 14% chord thickness.
Amongst the original ideas used on the machine is a foldable wing which can be stored in a tube 19.0ft x 10 inch (5.80 x 0.25 m). The fuselage comes down to 19. 0 x 2.0 x 5.0 ft (5.80 x 0.60 x 1.50 m) which makes for easy transport on a trailer, while alternatively, the wing can be carried on a roof rack and the rest of the machine towed on its own undercarriage. Fitted with an adjustable rudder bar to allow for pilot’s height, the Sirocco also has a trimmer for the elevator. Its spoilers seem particularly efficient and it can roll from 45O one side to 45 O the other side in 4 seconds. The Sirocco, the prototype of which made its first flight on the 26 July 1982, has been on sale since January 1983. Options include an instrument panel, VHF or CB radio equipment and a ballistically deployed parachute.
Construction: Aluminium, Fibreglass, Dacron.
Francois Goethals and Bernard D’Otreppes’ company Aviasud built the Sirocco between 1983 and the early 1990.
In 1984 the kit cost $8553 to $11,302 with three engine options.
Aeriane Sirocco
It was then taken over by Aériane, then the Sirocco license was sold to the ACLA company based in the Netherlands, which produced a modernized version as the Sirocco NG.
Midland Ultralights Ltd built the Sirocco 377GB to BCAR Section S in 1984.
The Sirocket comes from a legendary ULM: There was a major transformation of the prototype Sirocco NG by Dave Stephens and Dean Arnold to create the jet Sirocket classified in the British category of Single Seat Derugalated (SSDR).
Engine: JPX PUL425, 26hp at 4600rpm. Propeller diameter and pitch 39 x 18 inch, 1.00 x 0.45 m. No reduction. Max static thrust 150 lb, 68 kg. Power per unit area 0.17hp/ft., 1.9hp/sq.m. Fuel capacity 5.3 US gal, 4.4 Imp gal, 20.0 litre. Length overall 19.0 ft, 5.80 m. Height overall 8.9 ft, 2.70 m. Wing span 33.2 ft, 10. 12 m. Constant chord 4.6 ft, 1.38 m. Dihedral 0 degs. Sweepback 10 degs. Tailplane span 7.2 ft, 2.20 m. Fin height 3.7ft, 1.10m. Total wing area 151 sq.ft, 14.1sq.m. Total spoiler area 6.9 sq.ft, 0.64 sq.m. Fin area 4.3 sq.ft, 0.40 sq.m. Rudder area 4.1 sq.ft, 0.38 sq.m. Total elevator area 15.6 sq.ft, 1.45 sq.m. Wing aspect ratio 7.3/1. Wheel track 5.9 ft, 1.80 m. Wheelbase 4.7 ft, 1.40 m. Nose¬wheel diameter overall 12 inch, 30 cm. Main wheels diameter overall 12 inch, 30 cm. Floats, 10.2ft, 3.10m. Empty weight 232 lb, 105kg. Max take off weight 461 lb, 209 kg. Payload 229 lb, 104 kg. Max wing loading 3.05 lb/sq.ft, 14.9 kg/sq.m. Max power loading 17.7 lb/hp, 8.0kg/hp. Load factors; +6.7, 3.6 ultimate. Max level speed 71 mph, 115 kph. Never exceed speed 75 mph, 120 kph. Max cruising speed 65 mph, 105 kph. Economic cruising speed 53 mph, 85 kph. Stalling speed 24 mph, 40 kph. Max climb rate at sea level 680 ft/min, 3.5 m/s. Min sink rate 240 ft/min at 31 mph, 1.2 m/s at 50 kph. Best glide ratio with power off 12/1 at 40 mph, 65 kph. Take off distance 115 ft, 35 m. Land¬ing distance 165 ft, 50 m. Service ceiling 10,500 ft, 3200 m. Range at average cruising speed 186 mile, 300 km.
Designed by Vladimir Federov, a motorised glider. The kit for this glider comes from the Penza factory via St Petersburg and Hamburg. First flown in December 1999. The name “Russia” applies only in the UK and the USA; officially it is the AC5m. The company behind the US entrant at the World Class Design Competition in Oerlinghausen in 1993 was so impressed by the simplicity and construction of the prototype Russian entry that they purchased it and offered to aid the Group Mechta to get established in the USA. Mechta Sailplanes LLC took over the distribution in 1994 and aggressively marketed the glider to the extent that a second assembly plant was established at Penza to supplement the Moscow unit. This raised the annual production to 48. Russia Sailplanes Inc of Bozeman. Montana was set up in 1997 to take the Russia to the next level in the USA. This relatively small glider, with a wingspan of only 12.6m, is powered by a 28 hp, carburetted, 313cc, single-cylinder, two-stroke, retractable Compact Radial MZ35 engine. Motori Zanzottera in Italy originally designed the engine, with manufactur¬ing rights acquired by Compact Radial Engines of Canada.
Created 1990 to develop the Yamal multipurpose amphibian, suited to passenger (15) and cargo transportation, patrol, survey, firefighting, rescue and other roles. MAPO ‘Myasishchev’ to manufacture. Unusual powerplant; twin turboshafts driving single 6-blade pusher propeller aft of tail unit.
The Aviamilano A-2 is a high performance Standard Class single-seater of 15m (49 ft 2.5 in) span, and this Italian design went back into production in 1966 after first flying in prototype form a few years earlier.
The mid-set wing has rectangular inner panels and tapered outer panels which can be replaced individually if damaged; the central torsion box and spar structure is all-metal. There are trailing edge air brakes on the inner wings. The fuselage is of all-wood construction, with the forward part covered in glassfibre and the rear part with plywood.
The pilot’s seat is under a long flush transparent canopy, and the landing gear consists of a rubber-mounted skid and retractable monowheel. The cantilever T-type tail unit has all-moving horizontal surfaces with an anti-servo tab.
A-2 Standard Span: 49 ft 2.5 in Length: 23 ft 1 in Wing area: 127.6 sq.ft Aspect ratio: 19 Emptyweight: 419 lb Max take-off weight: 683 lb Max speed: 161 mph (in smooth air) Min sinking speed: 2.03 ft/sec at 41mph Best glide ratio: 34:1 at 54 mph
