Nostalgair N3 Pup / Super Pup / Ultra Pup / Stinger / Super Pup

Ultra Pup

Bob Counts developed the single-seat N-3 Pup in the mid-’80s as what might be termed the third generation of ultralights. The Pup was among the first ultralights to resemble a general aviation aircraft, the Piper J-3 Cub in this case. Like several innovative ultralights, the N-3 Pup won a Best New Design award at its first Sun ’n Fun appearance.

The original N-3 Pup being a ¾ scale Super Cub replica. Centre mounted joy stick, rudder pedals, tailwheel steerable through rudder pedals. The N3 Pup has a welded chromemoly steel fuselage and a two-cylinder horizontally-opposed Global engine to add to its air of authenticity. By 1995 marketed as the Preceptor Aircraft Corp Pup from 1230 Shepard St, Hendersonville, NC 28792, USA.

The N-3 Pup can be ordered with folding wings. In less than ten minutes you can fold your wings and take your pup home with you, or unfold them and go flying. The N-3 Pup is a real joy to fly with easy, docile handling. The N-3 Pup built as a bare minimum plane will meet the FAR 103 requirement.

The N-3 Pup was followed by Counts’ larger, souped up version of the N-3, the Super Pup. Empty weight (450 pounds) and flight speeds take it out of the ultralight category. The Super Pup has folding wings, short takeoff and landings and a reliable 4 stroke engine. Wing sub-kits come with ailerons, all hardware, brackets, fittings, fuel tanks, ribs, skins, spars and lift struts. No fabric.

Fuselage sub-kits come with stabilizers, elevators, rudder, landing gear, seat cusions, control systems, all glass, blank instrument panel, wheels and brakes, tailwheel, stringer formers, shock struts, brackets, fittings, firewall and all hardware and necessary accessories. No fabric.

Firewall forward package comes with engine, exhaust stacks, intake manifolds, carb heat, engine mount, prop, carburetor and hardware Engine prices will vary depending on model, Horsepower and electrical option.

The two place Ultra Pup features folding wings, roomier cabin, and electric starting, which all called for a redesigned fuselage. The CG was shifted to accommodate the extra weight up front. Instead of adding weight in the tail, they used heaver-gauge tubing at strategic locations. Thus, we achieved the desired CG shift by adding strength, not just dead weight. Building smarter safer aircraft for all to enjoy has always been the “Preceptor Way”.

Wing sub-kits come with ailerons, all hardware, brackets, fittings, fuel tanks, ribs, skins, spars and lift struts. No fabric.

Fuselage sub-kits come with stabilizers, elevators, rudder, landing gear, seats cusions, control systems, all glass, blank instrument panel, wheels and brakes, tailwheel, stringer formers, shock struts, brackets, fittings, firewall, all hardware and necessary accessories. No fabric.
Firewall forward package comes with engine, exhaust stacks, intake manifolds, carb heat, engine mount, prop, carburetor and hardware. Engine prices will vary depending on model, Horsepower and electrical option.

Stinger

The LSA Stinger uses the same fuselage as the N-3 with front fuselage wider, cabin structure deleted and combing added. The (1995) US$6700.00 kitset came complete with paint and ready to assemble. Skis and floats are optional. Preceptor has taken the same fuselage as used on the time proven N-3 Pup, made the front of the fuselage wider, left off the cabin structure, added a combing and have come up with one of the cutest and nicest flying little open cockpit parasols going. The Stinger brings back the joy of owning and flying an open cockpit airplane that has performance that will keep you smiling. A real beauty that looks and feels like an antique racer of the good old days.

Initially produced by Nostalgair, N-3 kits were subsequently made by Mosler Motors, which eventually sold kit production rights back to Counts. A company named TEC took over engine production from Mosler, but it quit making engines in 1991. At that point, Preceptor began assembling VW-based engines of various strengths. The 70-hp version remains the recommended engine for the Super Pup. Wing and fuselage kits may be bought separately, but one can save $1400 if they’re purchased together. A firewall-forward package for $7600 is for the 70-hp Preceptor VW-based engine that claims a 1400-fpm climb rate. Bob Counts’ son Duwayne runs Preceptor Aircraft by 1995, marketing the Cubs.

June 1997

N-3 Pup
Engine: Global (920cc) 25hp
Empty wt: 248 lbs
Wing span: 30’
Wing area: 123 sq.ft
Height: 5’
Length: 16’6”
Fuel cap: 5 USG
Construction: Aluminium, Wood, Steel
Max wt: 535 lbs
Stall speed: 27 mph
Max speed: 63 mph
Vne: 95 mph
Climb rate: 600 fpm @ 45 mph
Design limit: +6, -3g
Glide ratio: 12-1
Wing loading: 4.35 lbs/sq.ft
Power loading: 21.4 lbs/hp.

N-3 Pup
Engine: TEC, 40 hp
Speed max: 63 mph
Cruise: 60 mph
Range: 150 sm
Stall: 27 mph
ROC: 500 fpm
Take-off dist: 150 ft
Landing dist: 150 ft
Service ceiling: 10,000 ft
HP range: 40-75
Fuel cap: 5 USG
Weight empty: 250 lbs
Gross: 650 lbs
Height: 5 ft
Length: 16.5 ft
Wing span: 30.5 ft
Wing area: 120 sq.ft
Seats: 1
Landing gear: tail wheel

N3 Pup
Engine: 1037 cc Hummel Half VW, 37 HP
Horsepower: 37-50
Propeller: 54 x 22
Overall Length: 16 ft 6 in
Height: 5 ft
Wingspan: 30 ft 6 in
Wing Area: 120 sq.ft
Wing Loading: 3.76 lb.sq.ft
Empty Weight: 254 lb
Gross Weight: 535 lb
Useful Load: 281 lb
Fuel Capacity: 5 USGallons
Best Speed: 63 mph
Cruise Speed: 60 mph
Stall Speed @ Gross w/Full Flaps: 27 mph
Service Ceiling: 10,000 ft
Takeoff Distance: 150 ft
Landing Distance: 150 ft
Rate of Climb (gross): 600 fpm
Fuel burn: 1.8 USgph
Ultimate “G” Loading: +10.0 – 3.0
Cabin Width: 22.75 in
Seats: 1
Landing Gear: FG (Tailwheel)
Complete Kit Cost (2009): US$ 11,700
Less engine, instruments, fabric, prop

Stinger
Engine: TEC 4 stroke, 50 hp
HP range: 35-60
Speed max: 90 mph
Cruise: 80 mph
Stall: 27 mph
Take-off dist: 100 ft
Landing dist: 150 ft
Fuel cap: 10 USG
Weight empty: 350 lbs
Gross: 650 lbs
Height: 5 ft
Length: 17 ft
Wing span: 30.5 ft
Wing area: 122 sq.ft
Seats: 1
Landing gear: tail wheel
Cockpit width: 22.75 in

Stinger
Engine: 1600 cc VW, 50 HP
Propeller: 58 x 28
Overall Length: 17 ft 3 in
Height: 5 ft 6 in
Wingspan: 30 ft 6 in
Wing Area: 120 sq.ft
Wing Loading: 4 lb/sq.ft
Empty Weight: 400 lb
Gross Weight: 660 lb
Useful Load: 260 lb
Fuel Capacity: 10 USGallons (Option for 14 USGallons)
Best Speed: 90 mph
Cruise Speed: 80 mph
Stall Speed @ Gross w/Full Flaps: 35 mph
Service Ceiling: 10,000 ft
Takeoff Distance: 300 ft
Landing Distance: 300 ft
Rate of Climb (gross): 1000 fpm
Fuel burn: 3.5 USGallons Per Hour
Cabin Width: 22.75 in
Ultimate “G” Loading: +5.0 – 3.0
Landing Gear: FG (Tailwheel)
Seats: 1

Super Pup
Engine: VW, 50 hp
HP range: 50-75
Speed max: 115 mph
Cruise: 95 mph
Range: 300 sm
Stall: 35 mph
ROC: 1500 fpm
Take-off dist: 150 ft
Landing dist: 150 ft
Service ceiling: 12,000 ft
Fuel cap: 12 USG
Weight empty: 350 lbs
Gross: 1000 lbs
Height: 5.5 ft
Length: 17.25 ft
Wing span: 30.5 ft
Wing area: 122 sq.ft
Seats: 1
Landing gear: tail wheel

Super Pup
Engine: 2180 cc VW Conversion 70 HP
Horsepower: 50 – 80
Propeller: 62 x 28
Overall Length: 17 ft 3 in
Height: 5 ft 6 in
Wingspan: 30 ft 6 in
Wing Area: 120 sq.ft
Wing Loading: 6.99 lb/sq.ft
Empty Weight: 450 lb
Gross Weight: 1100 lb
Useful Weight: 650 lb
Fuel Capacity:14 + USGallons
Best Speed: 110 mph
Cruise Speed: 90 mph
Stall Speed @ Gross w/Full Flaps: 35 mph
Service Ceiling: 12,000 ft
Takeoff Distance: 300 ft
Landing Distance: 300 ft
Rate of Climb (gross): 1400 fpm
Maximum Range Fuel Burns: 4.0 USgph
Landing Gear: FG (Tailwheel)
Seats: 1
Cabin Width: 22.75 in
Ultimate “G” Loading: +6.0 – 3.0
Complete Kit Cost (2009): US$ 15,900
Less engine, instruments, fabric, prop

Ultra Pup
Engine: TEC 4 stroke, 60 hp
HP range: 60-80
Speed max: 115 mph
Cruise: 90 mph
Range: 390 sm
Stall: 37 mph
ROC: 1500 fpm
Take-off dist: 200 ft
Landing dist: 200 ft
Service ceiling: 12,000 ft.
Fuel cap: 14 USG
Weight empty: 450 lbs
Gross: 1000 lbs
Height: 5.5 ft
Length: 17.25 ft
Wing span: 30.5 ft
Wing area: 120 sq.ft
Seats: 2
Landing gear: tail wheel.

Ultra Pup
Engine: 2180 cc VW Conversion
Propeller: 62 x 28
Horsepower: 60 – 80
Overall Length: 17 ft 3 in
Height: 5 ft 6 in
Wingspan: 30 ft 6 in
Wing Area: 120 sq.ft
Wing Loading: 6.99 lb/sq.ft
Empty Weight: 450 lb
Gross Weight: 1100 lb
Useful Weight: 650 lb
Fuel Capacity: 14 + USGallons
Top Speed: 115 mph
Cruise Speed (75% power): 80 mph
Stall Speed @ Gross w/Full Flaps: 35 mph
Service Ceiling: 12,000 ft
Takeoff Distance: 300 ft
Landing Distance: 300 ft
Rate of Climb (gross): 1400 fpm
Maximun Range: Up to 350 Miles
Cabin Width: 24.75 in
Ultimate “G” Loading: +6.0 – 3.0
Landing Gear: FG (Tailwheel)
Seats: 2 – Tandem
Complete Kit Cost (2009): US$ 17,295
Less engine, instruments, fabric, prop

North Wing Quest

The strutted Quest GT4 is designed for two place trikes with a gross load rating of 990 lbs. The Quest GT4 is designed for the Sport X2 · Apache and Sport X2 · Navajo two-place trikes. The Quest GT4 wing can attach to any trike using the Universal Mount.

As a descendent of the Contour wing, the Quest’s ability to fly cross-country and handle turbulence well has been improved after eighteen months of design research. The Quest GT4 is a highly refined, strutted wing capable of a 40mph range of speed from stall to top speed.

All aircraft hardware and materials tested to required aircraft strength. Parts and tubing are aircraft quality, all made in the U.S.A.

Quest GT4 13.5
Wing Weight: 119 lbs.
Gross Weight: 990 lbs.
Wing Area: 148 square feet
Span: 31.5 feet
Aspect Ratio: 6.7 : 1
Double Surface: 80%
Frame: 6061 / 7075
Sail – main body: 8 oz. Stabilized Dacron
Number of Ribs – top: 23
Number of Ribs – lower: 10
Rib Material: 7075-T6
Stall speed: 32 mph
Trim speed: 50-60 mph
Top speed: 80 mph
Vne: 85 mph

North Wing T2 Tandem

The T2 Tandem Hang Glider has effortless handling qualities and an excellent sink rate. The airframe is constructed with a combination of 7075, 6061 and 6063 T6 aluminium alloys.

The following operating flight limitations are stipulated in the North Wing T2 Owner’s Manual:
Va speed: 37+/-2 mph
Maximum speed: 41+/-2 mph
Vne speed: 47 mph
Pitch angle no greater than 30 degrees up or down
Bank angle no greater than 60 degrees left or right

Supports very fast take-off even at full load. Very manoeuvrable with surprisingly precise steering, rises well in thermal, accumulates energy and makes it well to provide strong sensation to the passenger. Allows to make small flairs when landing. A single defect, it is heavy.

Double surface: 35%
USHPA Rating: 3
Wing Area 215 sq.ft / 20 m²
Glider Weight 68 lb / 31 kg
Span 34.9 feet / 10.6 m
Aspect Ratio 5.7
Frame 7075 & 6061
Control Frame 70 inches tall
Number of Ribs 16
Rib Material 7075 & 6061
Pilot “Hook-in” weight 220 – 450 lb / 99-204 kg

North Wing Ezy

A very forgiving novice glider, good handling, and landing is like its name – eazy.

The primary single surface glider EZY series has a 5 minute set-up time. Options include Comfort Bar, and Mylar Leading Edge Inserts.

EZY 170
Glider Weight: 49 lb / 22 kg
Wing Area: 169 sq.ft / 15.7 m²
Span: 29.5 ft / 8.99 m
Frame: 7075 & 6061
Control Frame: 55 inches tall
Number of Ribs – top: 11
Rib Material: 7075 & 6061
Pilot “Hook-in” weight: 130 – 190 lb / 59-86 kg

EZY 190
Glider Weight: 54 lb / 24 kg
Wing Area: 192 sq.ft / 17.83 m²
Span: 31.5 ft / 9.6 m
Frame: 7075 & 6061
Control Frame: 60 inches tall
Number of Ribs – top: 13
Rib Material: 7075 & 6061
Pilot “Hook-in” weight: 170 – 240 lb / 78-108 kg

North Wing Freedom

The Freedom is a curved tip, high aspect ratio Hang Glider with 35% double surface. Designed for a quick set-up, very easy to fly, comfortable in active air, and performs substantially better than modern training hill gliders.
The Freedom is a modern performance design “single surface” glider. Full length mylar-reinforced leading edge, nose cone, and a king post hang system provides light bar pressure for X-C flying, in three sizes.

The sail design of the Freedom controls twist to get performance without locking up the sail and subsequent handling problems. The standard sail is made with 4.1 oz medium finish Dacron sailcloth. There is also full race sail option, using Mylar (PX10) in the main body.

The Freedom uses 7075-T6 tubing for the mainframe and ribs, imported from Europe, and 6061-T6 seamless drawn domestic tube.

Freedom 150
Double Surface: 35%
Area: 148 square feet
Span: 30.12 feet
Aspect Ratio: 6.0
Number of Ribs: 13 Top
Frame Material: 7075
Rib Material: 7075
Glider Weight: 48 lb
Control Frame: 60 in
Pilot Hook-In Weight: 120-200 lb
USHPA Rating: 2
Suggested Retail Price 2009: $3990

Freedom 170
Double Surface: 35%
Area: 171 sq.ft / 15.9 m²
Span: 32.6 ft / 9.9 m
Aspect Ratio: 6.2
Number of Ribs: 15 Top
Frame Material: 7075
Rib Material: 7075
Glider Weight: 54 lb / 24 kg
Control Frame: 60 in
Pilot Hook-In Weight: 155-235 lb / 70-107 kg
USHPA Rating: 2
Suggested Retail Price 2009: $3990

Freedom 190
Double Surface: 35%
Area: 188 square feet
Span: 34.8 feet
Aspect Ratio: 6.4
Number of Ribs: 14 Top
Frame Material: 7075
Rib Material: 7075
Glider Weight: 57 lb
Control Frame: 60 in
Pilot Hook-In Weight: 195-275 lb
USHPA Rating: 2
Suggested Retail Price 2009: $4090

North Wing Pacer

The Pacer 13 wing is a strutted wing with 4 internal sprogs for pitch stability. The Pacer 13 is a very docile wing for its double surface and flies trim at 50 to 60 mph and has a top-end cruise speed of 65 mph.

The Pacer takes off with only 20 to 30 feet of extra roll. Control pressures in the roll axis will feel slightly more solid than the Maverick wing but overall very nice. The pull in pressures that it takes to go fast have been greatly reduced. The stall is very light and mild, as in the Maverick wing. The Pacer wing is designed for single place “FAA Part 103” trikes only, and cannot be used for 2-place trikes.

The Pacer has aircraft quality parts and tubing, all made in the U.S.A

Pacer 13
Wing Weight 86 lbs
Gross Weight 550 lbs
Wing Area 140 square feet
Span 31 feet
Aspect Ratio 7.25: 1
Double Surface 80%
Frame 6061 / 7075
Sail – main body 6 oz. Stabilized Dacron
Number of Ribs – top 18
Number of Ribs – lower 10
Rib Material 7075-T6
Stall: 25 mph
Trim speed: 55-60 mph
Top speed: 75 mph
Vne: 80 mph

North Wing Stratus

The North Wing Stratus light-trike wing is designed for optimal performance on the ATF Soaring Trike. The Stratus has a new wing, designed for improved sink rate and glide, and allows you to shut down your engine with confidence. The state-of-the-art airfoil and a streamlined kingpost ensures you will have great glide as well. The Stratus uses stability technology from the topless hang gliders to improve performance. By using only one bridle line and an outboard sprog (washout strut), we have achieved excellent pitch stability while reducing drag. The efficient airfoil used by the North Wing Stratus provides superb acceleration through turbulence, while displaying very docile flight characteristics in yaw and pitch. The Stratus shows excellent stall parameters straight ahead and in turns.

Stratus 17
Speed Range: 21 – 47 mph
Trim: 28 mph
Wing Area: 182 square feet
Span: 34.5 feet
Aspect Ratio: 6.6 : 1
Double Surface: 75%
Nose Angle: 132
Number of Ribs – top: 21
Number of Ribs – lower: 8
Rib Material: 7075-T6