Kamov

Nikolai Il’yich Kamov was born in 1902. In 1923 he graduated from the Tomsk Technological Institute. From 1923 to 1931 he worked at a number of the USSR’s aircraft factories having various posts, including those of brigade chief and leading designer in the design bureau of D.P.Grigorovich. From 1931 to 1948 (with short pauses) he headed separate brigades and an experimental design group in TsAGI. Between 1928 and 1943 he was engaged in the design and construction of autogyros.
Nicolai Kamov started building his first rotor-winged aircraft in 1929, together with N.K.Skrzhinskij. The first Soviet Autogiro was designed by Kamov and Skrzhinskii based on Cierva models.
In 1945 he started the design work on a co-axial helicopter. Kamov gained distinction for lightweight single-seat helicopters after Second World War, including Ka-8 of 1947.
On October 7, 1948 the Minister of Aviation Industry M.V.Khrunichev issued Directive No.772 ordering the establishment of the Experimental Design Bureau No.2 (OKB No.2) headed by N.I.Kamov. The OKB was to be hosted by the State All-union Experimental Factory No.3 in Sokol’niki, a district of Moscow. In accordance with this directive all the specialists of the group which had been developing the Ka-8 on a voluntary basis were transferred to Kamov’s OKB-2.
The aircraft factory No.3 of the Ministry of Aviation Industry was considered to be, for all practical purposes, the base enterprise of the OKB headed by chief designer I.P.Bratukhin. It comprised several production shops and divisions, including the flight test facility at the Izmaylovo airfield (then a suburb of Moscow). The OKB-2 occupied the rooms allocated to it at the premises of this enterprise. Its staff rendered considerable assistance to the speedily growing brigades of the OKB-2 in establishing themselves and gaining the necessary practical experience in design and calculation work.
This was followed by the single-seat Ka-10 of 1950 appearance as a piston-engined helicopter for shipbome observation duties, with two contrarotating rotors and no anti-torque tail rotor; these rotor design features were to be found in most subsequent Kamov helicopters. The Ka-15 two-seater of the 1950s used for agricultual work in addition to naval anti-submarine and other roles, and the Ka-18 four-seat development was flown in 1957 and widely operated on varied civil tasks. The Ka- 22 Vintokryl was a very large twin-turboprop convertiplane, first seen in 1961, and established many world records. The twin-turboshaft powered Ka-25 was first flown in April 1961 and deployed by the Soviet Navy as a shipborne anti-submarine warfare helicopter, and also for target acquisition, joining the Navy from 1972 and manufactured up to 1977.
The more capable Ka-27 was first flown in August 1973 and joined Soviet Navy from 1981, with the Ka-28 as an export version. The related Ka-29 first flown in July 1976 as a shipborne assault and transport variant plus the Ka-33 export model without weapons. The Ka-31 was flown in October 1987 as a shipborne AEW&C variant, and Ka-32 first flown October 1980 as civil model for transport, flying-crane, rescue, offshore support, patrol, firefighting and other uses, with the Ka-327 as a maritime patrol version of the Ka-32. The piston-engined civil Ka-26 first flew in 1965 (some military use), with the modern Ka-126 (first flown in October 1987) and the Ka-128 turboshaft developments. All having pod-and-boom fuselages to allow attachment of modules aft of cockpit for various cargoes (from passenger carrying to agricultural equipment) or left open for flying-crane duties. A new twin-turbine development is the Ka-226 (first flown September 1997). The Ka-50, was first flown in June 1982 as a single-seat combat helicopter, with the Ka-50N Black Shark night-attack version flying March 1997, while side-by-side two-seat derivative became the Ka-50 Alligator (first flown in June 1997).
1995: 8a March 8th St., Lubertsky, Moscow Region 140007, Russia.
In 1996, Kamov became a member of MIG MAPO-M.
A military multipurpose twin-turboshaft helicopter is the Ka-60 for 10 equipped troops (rolled out July 1998), with a 16-passenger civil version as the Ka-62. A light single-turboshaft Ka-115 was to fly in 1999, carrying pilot and up to four passengers.

Kaman K-1200 / K-MAX

First flew on 23 December 1991. Certification and initial deliveries took place in 1994. Using intermeshing main rotors, no tail rotor is required.

Kaman K-1200 / K-MAX Article

K-Max N267KA

By July 1997, 23 K-Max had been built. Overall, the fleet had accumulated 26,000 hrs, with the highest time example reaching 4000 hr since delivery in October 1994. The production rate was six per year.

Kaman K-Max
Engine: Textron Lycoming T 5317 A1, 1479 shp
Instant pwr: 1118 kW.
Length: 51.837 ft / 15.8 m
Height: 13.583 ft / 4.14 m
Rotor diameter: 48.228 ft / 14.7 m
Max take off weight: 11501.3 lb / 5216.0 kg
Weight empty: 4701.1 lb / 2132.0 kg
Payload: 2722 kg
Max. speed: 100 kts / 185 kph
Max cruise: 100 kts
Service ceiling: 25000 ft / 7620 m
Crew: 1
Payload: max 2700kg ext.

Kaman H-2 Seasprite

SH-2G(NZ)

The basic Seasprite design won a US Navy design competition during 1956 for a high performance, all-weather, multi-role utility helicopter, then designated the HU2K-1. The prototype Seasprite first flew on July 2, 1959 and an initial contract was for four prototypes and twelve production Kaman helicopters, now known as the UH-2A and given the name Seasprite. The initial production UH-2A models were powered by one engine, however, they were equipped for IFR operations and a total of 88 were ultimately built. The UH-2B was VFR equipped and 102 in total were built with fully retractable forward mounted main landing gears.

Kaman H-2 Seasprite Article

The UH-2A and UH-2B could each carry a 1814 kg (4,000 1b) slung load or 11 passengers, and work in planeguard, SAR, fleet reconnaissance, vertrep (vertical replenishment) and utility transport duties, operating from many surface warships as well as at shore bases.
The UH-2C, a re-definition of the UH¬2 and UH-2B, was the first to be fitted with two engines.
From 1967 Kaman converted of 88 earlier SH-2D Seasprites to the SH-2F version in May 1973. The SH¬2F “Super Seasprite” has “up-rated” engines and the LAMPS system (light airborne multi¬purpose system). Fifty-two new SH-2Fs were delivered from 1981. Deliveries of the SH-2F version began in May 1973 after completion of 190 early-model UH-2A/B SAR helicopters. Before manufacture was suspended 88 SH-2Fs were built. Deliveries from resumed production began in 1983, and Seasprites delivered after October 1985 have an increased gross weight of 6,124kg, compared with the 5,805kg of earlier SH-2Fs.
With a crew comprising pilot, co pilot and sensor operator, the SH 2F can carry MASW gear including Canadian Marconi LN 66HP surveillance radar, towed ‘bird’ for the AN/ASQ 18 MAD, AN/ALR 64 passive detection receiver, Difar passive and Dicass active sonobuoys, and comprehensive nav/com and display systems. The 4,000 1b (1814 kg) cargo ability remains, and a 600 1b (272 kg) rescue hoist is standard.
Production of the twin-turbine SH-2F Seasprite Mk.1 light airborne multipurpose system (Lamps I) restarted in 1982, to meet a US Navy requirement for up to 60 helicopters to equip vessels too small for the SH-60B Seahawk. Up to FY1986 54 new-build SH-2Fs had been authorised, and six more were requested in FY1987. These will join some 79 SH-2Fs from earlier production which were still in service at the beginning of 1986, some of which were upgraded SH-2Ds. Ten new SH-2Fs were delivered in 1986.
A re-engined version of the Seasprite, the YSH-2G, flew on April 2, 1985, powered by two General Electric T700 turboshafts similar to those used in the SH-60B and giving improved range, reliability, and maintainability. Evaluation of the prototype YSH-2G was completed in 1985. In general terms, the SH-2G is a retrofit of the SH-2F model.
The heart of the SH-2G(NZ)’s weapons platform is its Litton ASN-150/1553B tactical data system, APS-143 (V) 3 radar, Doppler APN-217 (V) 6 radar, FUR Systems AAQ-22 forward-looking infrared system, and Litton Amecon LR-100 electronic support measures ESM sensor system. These systems are operated from the two pilot analogue cockpit, with the observer (air¬borne warfare officer) occupying the left-hand seat. The helicopter’s missions are primarily surface sur¬veillance and anti-surface warfare, where the helicopter will conduct surveillance tracking and targeting and, if necessary, engage surface targets, but it is also capable of sub-surface weapon delivery and utility support, including search and rescue, replenishment, medical evacuation, naval gunfire spotting and troop transport for boarding operations.

SH-2G(A) Super Seasprite

In May 2006 the Royal Australian Navy’s fleet of 11 SH-2G(A) Super Seasprite was grounded with problems with their avionics and electronics systems. Service entry had been delayed by five years due to serious systems integration and software problems.

H-2 experiments included stub wings serving as sponsons and gunship version with Minigun chin turret among other weapons.

Kaman Aerosystems, are powered by two General Electric T700 turbines rated at 1,600 hp each. Measuring 16 meters in overall length with a 13.5-meter rotor diameter, they have a maximum take-off weight of 6,441 kg, a range of approximately 275 nautical miles, and a maximum endurance of around two hours and 45 minutes. Capable of reaching airspeeds near 130 KCAS, they feature a standard crew of three: a pilot, an observer responsible for warfare and mission coordination, and a helicopter loadmaster managing utility operations. Armament options include Penguin anti-ship missiles, Mk 46 torpedoes, and a door-mounted MAG 58 machine gun.

The SH-2G lineage traces its origins to the United States, where the type was developed in the 1980s as a modernized version of the SH-2F for use on naval vessels unable to accommodate larger helicopters like the SH-60B Seahawk. The SH-2G introduced more powerful engines, a reinforced upper fuselage, and improved avionics, including an Integrated Tactical Avionics System (ITAS) and digital automatic flight controls. Despite its eventual phaseout in the U.S. by 2001, the type continued to serve internationally, including with the Egyptian, Polish, and Peruvian navies.

The SH-2G(I)’s design emphasizes multi-role capability, supporting missions such as over-the-horizon surveillance using radar and FLIR systems, anti-ship strike with guided missiles, underwater warfare with torpedoes, as well as disaster response, medevac, and transport operations.

SH-2G(I)

Gallery

UH-2A
Engine: 1 x GE T58-GE-8B, 1250-hp.

UH-2C
Engine: 2 x T58-GE-8B.

HH-2D
Engines: 2 x General Electric T58 GE 8F turboshafts, 1,350 hp each.
Length: 38 ft 4 in.
Rotor dia: 44 ft.
Speed: 168 mph.
Ceiling: 22,500 ft.
Range: 445 miles.

SH-2F Seasprite
Engine: 2 x GE T58 8F turboshafts, 1,350 shp (1007 kW).
Installed pwr: 2041 kW.
Rotor dia: 13.4 m (44 ft 0 in).
Main rotor disc area 141.25 sq.m (1,521.0 sq ft).
Fuselage length: 12.3 m (40 ft 6 in), (folded): 11.7 m.
Height: 4.72 m (15 ft 6 in).
No. Blades: 4.
Empty wt: 3193 kg (7,040 lb).
MTOW: 6033 kg (13,300 lb).
Max speed: 265 km/h (165 mph).
ROC: 744 m/min.
Ceiling: 6860 m.
HIGE: 5670 m.
HOGE: 4695 m.
Fuel cap (+aux): 1500 lt ( 455 lt ).
Range max¬ internal fuel: 680 km (422 miles).
Crew: 3.
Armament: one or two AS torpedoes (usually Mk 46).

SH-2G Super Seasprite
Engine: 2 x GE T700-401.
Instant pwr: 1259 kW.
Rotor dia: 13.41 m.
MTOW: 6124 kg.
Payload: 2107 kg.
Useful load: 987 kg.
Max speed: 141 kts.
Max cruise: 136 kts.
Max range: 869 km.
HIGE: 17,600 ft.
HOGE: 14,600 ft.
Service ceiling: 20,400 ft.
Crew: 3.
Pax: 8.

SH-2G(NZ)
Engines: 2 x T700 GE-401 gas turbines of up to 1723 shp each, plus one Garret GTCP36-150 APU.

Kaman H-43 Huskie

The engine of the HH-43F Huskie drives twin inter-meshing rotors that cross above the fuselage. It has a tail and large, rear-facing fuselage door.

Kaman H-43 Huskie Article

The H-43 was designed extremely compact because it’s inter-meshing rotors. Between 1958 and 1965 some 365 were built.

By late 1960s well over 200 H-43 Huskie turbine-powered rescue helicopters were serving with the USAF.

Kaman HH 43 B Husky
Engine: Lycoming T53-L-1B, 848 shp
Length: 25.164 ft / 7.67 m
Height: 12.598 ft / 3.84 m
Rotor diameter: 47.014 ft / 14.33 m
Max take off weight: 9161.8 lb / 4155.0 kg
Max. speed: 104 kts / 193 kph
Service ceiling: 25000 ft / 7620 m
Range: 240 nm / 445 km
Crew: 1+8

HH-43F
Engine: Lycoming T53-L-11A turboshaft, 1150 hp.
Crew. 2.

Kaman HTK-1

Ordered into production for the U.S. Navy at the same time as the HOK-1“off the drawing board “, the HTK-1 also uses the Kaman system of inter-meshing rotors, controlled through servo flaps.

The HTK-1 was delivered to the U.S. Navy as trainer/ambulance, and also adopted as remote-controlled drone. For ambulance work it can carry a stretcher and medical attendant in its cabin, and two casualties on Stokes litters externally, one on each side.

One HTK-1 has been fitted experimentally with two Boeing T50 gas turbines.

Boeing YT-50-BO-1 powered

During 1958, Kaman completed a research project in which this HTK-1 was flown on electric power. The 240 hp Lycoming engine was replaced by an electric motor of equivalent power, connected to a ground power source by cable.

HTK-1 electric
HTK-1 Huskie BuNo. 129313 C/N 422

Twenty-nine HTK-1s were built between 1951 and 1953. Powered by a 240 hp Lycoming O-435-4 piston engine, they served with the Navy at Pensacola until 1957.

HTK-1 Huskie BuNo. 129313 C/N 422

Engine: 235 h.p. Lycoming O-435-4
Rotor dia.: 40 ft
Fuselage length: 23 ft
Max Weight: 2,750 lb
Max. Speed: 75 mph
Ceiling: 10,000 ft
Typical range: 194 miles at 70 mph with full load
Seats: 3

Kaman HOK-1

Following evaluation of the Kaman K-225, the US Navy chose the HOK-1 design as best of several submitted in competition for a liaison helicopter. Using the same rotor systems as the K-225, the HOK-1 was put into production off the drawing-board and delivered in quantity to the U.S. Navy and Marines during 1950s. It normally carries four people; but as an ambulance will accommodate two stretcher patients and one sitting patient or medical orderly, in addition to the pilot. Stretcher loading is through the nose, as on the HTK-1.

In service with the U.S. Navy in 1955 as a 4-seat liaison and casualty evacuation helicopter.

As part of a general development programme, several piston-engined helicopters, such as this Kaman HOK-1, were re-engined with gas turbines.

Engine: 800 hp Pratt & Whitney R1340-48
Rotor dia.: 46 ft.
Max Weight: 3,500 lb.
Seats: 4

Kaman K-225 / YH-22

A progressive development of the K-125A and K-190 of 1947 and 1948, Kaman’s second helicopter, the K-225, first flew on 10 December 1951.Kaman put the K-225 into limited production in 1949 as the YH-22.

The K-225 is powered by a 225 hp Lycoming O-435.

Certified by the CAA, there were eleven K-225s produced and they were used in the crop-dusting role.

As a single-seat crop duster, the K-225 was supplied to the Turkish Department of Agriculture.

Testing by the U.S. Navy influenced the award of contracts for the HOK-1 and HTK-1 to the company.

Under U.S. Navy contract, Kaman fitted a 175-h.p. Boeing YT-50 gas-turbine engine to a K-225, and this was the first helicopter, with turbine-driven rotors, flying on 10 December 1951.

Engine: 225 hp Lycoming O-435
Rotor diameter: 38 ft
Fuselage length: 23 ft
Height: 11 ft 6 in
Empty weight: 1800 lb
Loaded weight: 2700 lb
Max speed: 73 mph
Cruise: 65 mph
ROC: 1000 fpm
Ceiling: 12,000 ft
Range: 194 mi at 65 mph
Seats: 3