Built by Robert Ladd in 1967, the Taylor Chihuahua single place, enclosed low wing monoplane, was developed from the British John Taylor monoplane. One was built, N2531, was first flown in September 1967.
The LACO-125 is a sturdy two-seat biplane that is easy to fly yet very agile. To aid the builder, there are no castings, forgings or other difficult-to-build or obtain parts. The fuselage is a Warren truss type of chrome-moly tubing with wood formers and stringers. The wings are conventional two-spar construction with wood ribs and chrome-moly fittings for strength. This homebuilt derives its designation from the use of a 125-hp Continental in the prototype which is interchangeable with the 145-hp engine. The weight distribution of the LACO-125 is such that larger four-cylinder powerplants can be substituted.
The first design of Adolphe-Étienne Lachassagne was this 1912-1913 tandem wing monoplane. The front and the tail wings could be adjusted. The two propellers were fitted at the trailing edge of the front wing, and were adjustable together with the wing. The engine was mounted in the fuselage and drove the two propellers via a rod. As Lachassagne had no funds to acquire a new and powerful engine he had to do with second hand engines. Lachassagne started to study a new aeroplane with tandem wings. The AL-2 airplane was never built in full size, only as a model. He was creative inventor and kept developing and building variable wing profile aircraft at least up to WW2. He also tried to develop a small affordable “peoples airplane”.
The first design of Adolphe-Étienne Lachassagne was a 1912-1913 tandem wing monoplane. As Lachassagne had no funds to acquire a new and powerful engine he had to do with second hand engines. Lachassagne started to study a new aeroplane with tandem wings. The AL-2 airplane was never built in full size, only as a model.
Lachassagne was creative inventor and kept developing and building variable wing profile aircraft at least up to WW2. He also tried to develop a small affordable “peoples airplane”.
Swedish polar explorers Andrée, Fraenkel and Strindberg departing from Danes Island, Spitsbergen, in the Svalbard archipelago, on July 11, 1897, in an ill-fated attempt to reach the North Pole. The hydrogen gas balloon, 67 feet in diameter, with a capacity of 170,000 cubic feet, was built by Henri Lachambre in Paris. Three varnished layers of double Chinese silk formed the upper half of the envelope, with a single layer on the bottom half. A heavy casing of woven hempen netting shrouded the balloon, which was surmounted by a cap, or calotte, of varnished silk to keep arctic snows from lodging in the netting. Suspended from a bearing ring formed from American elm wood was a wicker car measuring 6.5 feet in diameter and 5 feet deep. The balloon was originally named “Le Pôle Nord”, but was later christened “Örnen” (Eagle). In 1930, the remains of Saloman Andrée and his two companions were discovered on White Island and repatriated to Sweden.
Built by Joseph L Lacey in 1962, the the two place Lacey M-10 had a pivoting unbraced wing stowed fore-and-aft for trailing or hangaring. One was built, N73884, first flying on 7/6/62.
The Lacey is one of the simplest designs for the homebuilder to construct. In the words of its designer, “There are no com¬pound curves and very few simple ones. The wing has no wash-in, no washout, no dihedral, and no incidence angle (the bottom is flat, and fits flat on top of the fuselage). It has no taper, no slots, no flaps, no spoilers, no wingtips, no struts, no wires, no braces, no spars.” The two-place, towable Lacey is propelled by a 90-hp Continental.
Totally faired in but tubular under the skin. The TL 22 is made in the Czech Republic and equipped with a Rotax 582, though it can be orderd with other power units.
Empty weight: 170 kg Wing span: 10.38 m Wing area: 10 sq.m Fuel capacity: 30 lt Engine: Rotax 582, 65 hp MAUW: 400 kg Seats: 2 Max speed: 120 kph Cruise speed: 110 kph Minimum speed: 55 kph Climb rate: 7 m/s Fuel consumption: 13 lt/hr Price (1998): 28 000 000 L