Aero Tech Canadian Skyrider

Single seat single engined high wing mono¬plane with hybrid control. Wing has constant chord; cruciform tail. Pitch control by weight¬shift; yaw control by fully flying rudder; no separate roll control; control inputs through weight shift for pitch/yaw/roll. Wing braced from above by kingpost and cables, from below by cables; single ¬surface. Undercarriage has three wheels in tricycle formation; torsion bar suspension on all wheels. Nosewheel steering. No brakes. Aluminium tube framework, without pod. Engine mounted above wing driving pusher propeller. Framework from 6061T6 and 2024T3 aluminium, 4130 aircraft steel; coated stainless steel rigging, Dacron wing surface.
The Canadian Skyrider is a hybrid control ultra¬light, the pilot using his swing seat as the principal means of control, with his weight shift aided in yaw by a rudder.
Standard power unit is a twin cylinder Cuyuna 430R with dual ignition and in flight recoil restart facility. Alternatively, the sing¬le cylinder Cuyuna 215 cc engine may be fitted. Construction time is estimated at 30 h; a trailer is needed for transportation.
After producing between 150 and 200 aircraft, the future of the company seemed in some doubt in 1983.

Engine: Cuyuna 430R, 30 hp
Propeller: 48 x 23 inch, 1.22 x 0.58 m
Reduction ratio: 2.0/1
Power per unit area: 0.19 hp/sq.ft, 2.0 hp/sq.m
Wing span: 32.0ft, 9.75m
Fuel capac¬ity: 3.8 USG, 3.2 ImpG, 14.4 lt
Contant chord: 5.0 ft, 1.52 m
Total wing area: 160 sq.ft, 14.9 sq.m
Aspect ratio: 6.4/1
Nosewheel dia. Overall: 11 inch, 28cm
Empty weight: 155 lb, 70 kg
Main wheels dia overall: 11 inch, 28cm
MTOW: 420 lb, 191 kg
Payload: 265 lb, 120 kg
Vne: 55 mph, 88 kph
Wing loading: 2.62 lb/sq.ft, 12.8 kg/sq.m
Power loading: 14.0 lb/hp, 6.4 kg/hp

Engine: Cuyuna 215R, 20 hp
Power per unit area: 0.13 hp/ sq.ft, 1.3 hp/ sq.m
Wing span 32.0ft, 9.75m.
Fuel capac¬ity: 3.8 USG, 3.2 ImpG, 14.4 lt
Contant chord: 5.0 ft, 1.52 m
Total wing area: 160 sq.ft, 14.9 sq.m
Aspect ratio: 6.4/1
Nosewheel dia overall: 11 inch, 28cm
Vne: 55 mph, 88 kph
Main wheels dia overall: 11 inch, 28cm

Leave a comment