Main Menu

Scheibe Bergfalke 2 / Bergfalke 3 / Bergfalke 4




This tandem two-seater training and competition sailplane had its origins in the prototype Mü-13E Bergfalke I general purpose two-seater designed and built by Dipl-lng Egon Scheibe in Austria, and which made its first flight on 5 August 1951. At the end of that year the Scheibe Flugzeugbau GmbH was founded and the Bergfalke (or Mountain Falcon) was the first type to go into production at the new company's works at Munich-Riem airport.


From the Mü-13E the Bergfalke II was developed with 4° forward sweep on the wings, and more than 250 of these two versions were built; the Mk II, dating from 1951, was succeeded by the Bergfalke II/55 two-seater which also had a fabric-covered steel tube fuselage and single-spar wooden wings of 54 ft 6 in span and 15.6 aspect ratio, these being of 14.5% Mü section, higher gross weight and payload.


A Bergfalke 2/55 has been modified with the addition of a retracting Nelson H-59 engine and two wheel landing gear.



(TC-PDJ)/5824 Scheibe Bergfalke II/55 (5824)


The II/55 was succeeded by the Bergfalke III with a more streamlined cockpit canopy, a redesigned and taller fin and rudder and 2° forward sweep on the wings of the same section, which have Schempp-Hirth air brakes; the monowheel is non-retractable as before, but a tail wheel replaces the II/55's tailskid.
A few Bergfalke IIIs were built under licence by the Spanish firm Stark Iberica SA.
The -4 model was introduced in 1970 with 2 ft greater span (17.2 m./ 56.5 ft.) wing of Wortmann section and large Schempp-Hirth airbrakes. The Bergfalke IV aspect ratio of 17.4 gives improved performance, including a best glide ratio of 34:1 instead of 28:1 and a lower minimum sinking speed.
Bergfalke IV
Construction of the prototype Bergfalke IV began early in 1969 and the first flight was made a few months later, and a total of 70 of this version had been built by the beginning of 1978. The cantilever mid-wings are of all-wood construction with a fabric covered plywood skin; they have single laminated beechwood box spars joined at the fuselage centreline with a single vertical pin. The ailerons and Schempp-Hirth air brakes are also of wood. Like previous versions, the welded steel tube fuselage is fabric-covered, the nose section on the Mk IV being a moulded glassfibre shell. The tail unit is of wooden construction, the tailplane being mounted on the fuselage forward of the fin; there is a Flettner trim tab in the starboard elevator. The landing gear consists of a non-retractable monowheel and a tailwheel. The two pilots are seated under a blown Plexiglas canopy.
Bergfalke 4


A Bergfalke IV has been modified by the Flying Training School of the Detmold Aero Club into a motor glider, with one Lloyd LS-400 piston engine in the fuselage driving a pair of small two-bladed pusher propellers which rotate within cutouts in each wing near the trailing edge; there is a 12v battery for engine starting. In this form the Bergfalke IV is known as the LVD BF IV-BIMO, the letters LVD signifying Schulerfluggemeinschaft der Luftsportverein Detmold EV. Scheibe themselves were test flying another powered version of the Bergfalke IVearly in 1976 with a 52hp Hirth 0-28 flat twin engine mounted on a retractable pylon aft of the cockpit and driving a two-blade fixed-pitch tractor airscrew; the engine can be raised and lowered into the fuselage electrically in less than 20 seconds, retracting behind closed doors. This version was known as the Bergfalke IVM.


Bergfalke II

Bergfalke 3
Wing span: 16.6m / 54.5ft
Wing area: 17.9sq.m / 192.7sq.ft
Empty Weight: 275kg / 606lb
Payload: 190kg / 419lb
Gross Weight: 465kg / 1025lb
Wing Load: 25.98kg/sq.m / 5.32lb/sq.ft
Seats: 2
L/DMax: 28 @ 80kph / 43 kt / 50 mph
MinSink: 0.73 m/s / 2.4 fps / 1.42 kt
Aspect ratio: 15.6
Structure: wood/ fabric wings and tail, steel-tube/ fabric fuselage

Bergfalke IV
Span: 17.2 m / 56 ft 5.25 in
Length: 8.00 m / 26 ft 3 in
Height: 1.5 m / 4 ft 11 in
Wing area: 17.5 sq.m / 183 sq.ft
Aspect ratio: 17.4
Wing section: Wortmann SO2/SO2/1
Empty weight: 300 kg / 661 lb
Max weight: 505 kg / 1,102 lb
Water ballast: None
Max wing loading: 29.4 kg/sq.m / 6.02 lb/sq ft
Max speed: 124 mph / 108 kt / 200 km/h (in smooth air)
Max aero-tow speed: 87 mph / 92 kt / 170 km/h
Stalling speed: 35 kt / 65 km/h
Min sinking speed: 2.23 ft/sec / 0.68 m/sec at 47 mph / 40.5 kt / 75 km/h

Best glide ratio: 34:1 at 59 mph / 46 kt / 85 km/h


Bergfalke 4




Copyright © 2020 all-aero. All Rights Reserved.
Joomla! is Free Software released under the GNU General Public License.