Main Menu

Cisco Motors Snap 100

The Cisco Snap 100 is an Italian designed piston engine for use on paramotors and paragliders. Designed and built by Cisco Motors the Snap 100 is a two-stroke 96 cc capacity, single cylinder, lightweight engine with electronic ignition, producing 17 BHP at 9000 rpm.

The propeller assembly on the Snap 100 is held in by one bolt and has been prone to fall out and cause the propeller to fall off.

 

Applications:
Bailey Snap 100 (Paramotor)
Fly Products Ryan (Paramotor)
Fresh Breeze Snap 100 (Paramotor)
Clemente Snap 100 (Paramotor)

 

Specifications:

Snap 100
Type: Single cylinder, two-stroke paramotor engine
Bore: 51 mm (2 in)
Stroke: 47 mm (1.85 in)
Displacement: 96 cm3 (5.86 cu in)
Width: 295 mm (11.6 in)
Height: 430 mm (19.9 in)
Dry weight: 12.4 kg (27 lb)
Valvetrain: Piston ported two-stroke
Fuel system: Walbro WB32 carburettor since 2007 WG08
Fuel type: 92-98 Octane petrol
Oil system: Pre-mixed synthetic two-stroke oil, ratio 40:1
Cooling system: Fan cooled
Reduction gear: 3.63:1 reduction ratio, clutch operated.
Starting system Manual 'pull cord' starting system
Power output: 12.5 kW (16.7 hp) at 9,400 rpm
Specific power: 130 kW/L (2.84 hp/cu in)
Compression ratio: 11.2:1
Power-to-weight ratio: 1 kW/kg (0.6 hp/lb)

 

 


Copyright © 2017 all-aero. All Rights Reserved.
Joomla! is Free Software released under the GNU General Public License.