Main Menu

----------new
HG-hg
Conquest
Conquest
 
Conquest-01
 
The Conquest is an advanced monoplane which was adapted from the Quicksilver. It is stressed for ridge soaring and thermal flying in as little as 12 mpd winds. The wing has a single surface, 12% airfoil and a load factor of 3.5.
 
The centre of gravity can be adjusted to the flyers weight. The Conquest goes to gether in under 15 minutes with a 7/16in spanner and a screwdriver. Optional extras were ailerons, wing fences and soaring wingtips. Landing wheels and tail skid were standard.
 
The airframe is made from 6061-T6 1 7/8in, 1 1/8in, 1in and 0.5in anodised aluminium, which came in a choice of colours: gold, blue, black, or red. Fully sleeved and doweled. Outer cables are 1/8in, inner cables are 5/32in, all 7 strand, stainless steel aircraft quality. All hardware is die-stamped, bent, hardened and anodised.
 
The sail is Howe and Bainbridge 3.8oz stabilised dacron. A fully adjustable seated harned was provided.
 
Conquest 52
Chord length: 4.33 ft
Wing span: 32.6 ft
Wing area: 140.8 sq,ft
Nose angle: 180˚
Weight: 63 lb
Pilot weight: 130-190 lb
Takeoff speed: 14 mph
Stall speed: 12 mph
Max speed: 30 mph
Best glide ratio (L/D): 8-1
Best L/D speed: 15 mph
Min sink: 250 fpm
 
Conquest 60
Chord length: 5 ft
Wing span: 32.6 ft
Wing area: 163 sq,ft
Nose angle: 180˚
Weight: 67 lb
Pilot weight: 160-225 lb
Takeoff speed: 14 mph
Stall speed: 12 mph
Max speed: 35 mph
Best glide ratio (L/D): 8-1
Best L/D speed: 15 mph
Min sink: 270 fpm
 
Conquest-02
 
 
 
 


Copyright © 2018 all-aero. All Rights Reserved.
Joomla! is Free Software released under the GNU General Public License.