Main Menu

 Scott Aircraft Co Champ
 
Scott-Champ
 
The Champ is designed for intermediate to advanced flying, either free flight or towing. Competition rated, the Champ has a very precise, sensitive control and rapid dive recovery.
 
Cambered lead spars give a semi-cylindrical edge and this model features a vertical stabiliser for tighter turns. The unique two-piece cross spar hinges in the centre and is held in place by a centre wing nut. This eliminates disassembly of wing bolts and rolling up of cable allowing speedy set-up and take-down. An optional kit converted it for water towing.
 
The airframe is made from 6061-T6 and 6063-T832 anodised aluminium. All rigging cable is 3/32in 7x7 aircraft type and is double swagged. All bolts, rigging and fittings are aircraft quality. The sail was either 3.0 or 3.8oz dacron, custom designed in colours.
 
The Champ came with a seat that featured a foot rest, spreader bar, and a wide backrest plus a 6000 lb test pilot support system. The control bar is padded.
 
Leading edge: 17.5 ft
Keel length: 14 ft
Wing span: 30 ft
Wing area: 190 sq,ft
Aspect ratio: 4.74
Nose angle: 102˚
Sail billow: 6˚
Weight: 40 lb
Pilot weight: 150-200 lb
Takeoff speed: 11 mph
Stall speed: 9 mph
Max speed: 30 mph
Best glide ratio (L/D): 7-1
Best L/D speed: 16 mph
Min sink: 180 fpm
 
Leading edge: 18.5 ft
Keel length: 15 ft
Wing span: 31 ft
Wing area: 215 sq,ft
Aspect ratio: 4.47
Nose angle: 102˚
Sail billow: 6˚
Weight: 41 lb
Pilot weight: 185-225 lb
Takeoff speed: 11 mph
Stall speed: 9 mph
Max speed: 30 mph
Best glide ratio (L/D): 7-1
Best L/D speed: 16 mph
Min sink: 180 fpm
 
Scott-Champ-LD
 
 
 
 
 


Copyright © 2018 all-aero. All Rights Reserved.
Joomla! is Free Software released under the GNU General Public License.