Main Menu

Champion J-1 Jupiter
 
The J-1 Juptier was an all original design of Kenneth R. Champion and Horace Sackettin 1959 using wooden construction methods based on the Pietenpol Air Camper and new applications of fiberglass layups.
 
The J-1 is a low wing aircraft with conventional landing gear and a large bubble canopy. The wings are configured without dihedral. The fuselage uses a wooden geodesic airframe construction with steel secondary wing spars. The wing panels are covered with single seamless flat fiberglass panels that are bonded to the wooden wing ribs and spars. The leading edge is formed with fiberglass layered up in place. The same process is used on the elevators.
 
The J-1 Jupiter won the Outstanding Design award at the Experimental Aircraft Association airshow in 1959.
 
Variants
Jupiter K-2
 
Specifications:
 
Jupiter J-1
Engine: 1 × Continental A65, 65 hp
Propellers: 2-bladed MacCauley 65-60
Length: 17 ft 4 in (5.28 m)
Wingspan: 21 ft (6.4 m)
Wing area: 88 sq ft (8.2 m2)
Airfoil: NACA 4412
Empty weight: 627 lb (284 kg)
Gross weight: 910 lb (413 kg)
Fuel capacity: 16 U.S. gallons (61 L; 13 imp gal)
Max speed: 160 mph
Cruise speed: 96 kn; 177 km/h (110 mph)
Stall speed: 48 kn; 89 km/h (55 mph)
Rate of climb: 400 ft/min (2.0 m/s)
Range: 300 miles
Crew: 1
 
 
 
 
 


Copyright © 2017 all-aero. All Rights Reserved.
Joomla! is Free Software released under the GNU General Public License.