Main Menu

ABC Motors Robin

ABC-Robin
 
The ABC Robin was a British single-seat light aircraft designed by A. A. Fletcher in 1929. It was a high-wing, single-seat monoplane of conventional taildragger configuration. The cockpit was fully enclosed, the first lightplane to be so equipped in Britain. It was designed at the request of T.A.Dennis (Managing Director) specifically to use the firm's 30–40 h.p. Scorpion engine.
 
Construction was primarily of wood with metal confined to fittings and a few highly stressed parts. The fuselage was constructed as a wooden box consisting of four spruce longerons with thin plywood covering with light internal bulkheads. The wood-framed wings, of RAF 34 section, were hinged at their inner rear corners to the top of the fuselage and supported by tubular struts in 'Vee' formation to the lower longerons of the fuselage. The tail was also wood-framed and both wings and tail were covered with doped fabric.
 
The Robin, registered G-AAID, was built by ABC Motors Limited at Walton-on-Thames in 1929. The first flight was at Brooklands in June, and it was displayed at the Olympia Aero Show in July. It was modified later in the year with the windscreen moved back to allow access to the fuel filler caps from the outside, and with an enlarged fin and rudder. The sole Robin built was scrapped at Brooklands in 1932.
 
Engine: 1 × ABC Scorpion II, 40 hp (30 kW)
Length: 17 ft 7 in (5.36 m)
Wingspan: 25 ft 4 in (7.72 m)
Wing area: 110 ft² (10.23 m²)
Height: 5 ft 9 in (1.73 m)
Empty weight: 415 lb (188 kg)
Loaded weight: 680 lb (308 kg)
Maximum speed: 105 mph (91 knots, 169 km/h)
Range: 340 mi (295 nm, 545 km)
Service ceiling: 17,000 ft (5,200 m)
Rate of climb: 750 ft/min (3.8 m/s)
Wing loading: 7 lb/ft² (34 kg/m²)
Power/mass: 0.058 hp/lb (100 W/kg)
Crew: one
 
 
 
 
 


Copyright © 2018 all-aero. All Rights Reserved.
Joomla! is Free Software released under the GNU General Public License.